outout state, tritium sensor, and vaccum output to serial port

README.md

@@ -0,0 +1,7 @@
+# introduction
+
+The interlock folder contains P1AM-100 code (which is Arduino MKX1000).
+
+## setup using Arduino IDE 1.X
+
+The P1AM.h library is needed. 

interlock/interlock.ino

@@ -29,6 +29,10 @@ unsigned long lcdReset = 0;
 int lcdLooper = 0;
 int lcdLine2 = 16;
 
+// Timer for Serial output
+unsigned long previousMillis = 0;
+const unsigned long interval = 5000; // 1000 milliseconds = 1 second
+
 /******* 
  *Setup function runs once on startup
  *******/
@@ -106,4 +110,28 @@ void loop() {
   // Reset the watchdog timer
   P1.petWD();
 
+  unsigned long currentMillis = millis();
+
+  if (currentMillis - previousMillis >= interval) {
+    //Serial.print("server is at ");
+    //Serial.println(Ethernet.localIP());
+
+    Serial.print("State: ");
+    Serial.print(currentState);
+    Serial.print(". ");
+    
+    Serial.print("Tritium sensor: ");
+    Serial.print(tSniffer);
+    Serial.print(" mCr. ");
+
+    Serial.print("Vaccum: ");
+    Serial.print(vacuum);
+    Serial.print(" Torr. ");
+
+    Serial.print("SubPump: ");
+    Serial.print(subPump);
+    Serial.println(" amp.");
+    
+    previousMillis = currentMillis; // Reset the timer
+  }
 }