Vignesh Sitaraman
45ab7f9cee
modified: anasen_fem/run.py modified: anasen_fem/scalars.dat.names modified: anasen_fem/wires_gmsh2d_bc.py new file: run_sx3.sh
79 lines
2.5 KiB
Python
79 lines
2.5 KiB
Python
import ROOT
|
|
import os
|
|
import sys
|
|
|
|
# 1. FIX: Manually load the Garfield library if it's not in the ROOT namespace
|
|
# Update this path to your actual installation location
|
|
garfield_lib_path = "/home/vsitaraman/garfieldpp/install/lib/libGarfield.so"
|
|
|
|
if os.path.exists(garfield_lib_path):
|
|
ROOT.gSystem.Load(garfield_lib_path)
|
|
else:
|
|
print(f"CRITICAL ERROR: {garfield_lib_path} not found.")
|
|
sys.exit(1)
|
|
|
|
# Verify access
|
|
try:
|
|
test_gas = ROOT.Garfield.MediumMagboltz()
|
|
except AttributeError:
|
|
print("ERROR: Garfield shared library loaded, but 'Garfield' namespace not found.")
|
|
print("Ensure Garfield was compiled with -DWITH_PYTHON=ON")
|
|
sys.exit(1)
|
|
|
|
# --- 2. GAS SETUP (96% He, 4% CO2) ---
|
|
gas = ROOT.Garfield.MediumMagboltz()
|
|
gas_file = "He96_CO2_4_260Torr.gas"
|
|
|
|
if not os.path.exists(gas_file):
|
|
print("Generating new Magboltz gas table (260 Torr)...")
|
|
gas.SetComposition("he", 96.0, "co2", 4.0)
|
|
gas.SetTemperature(293.15)
|
|
gas.SetPressure(260.0) # Pressure in Torr
|
|
|
|
# Grid must cover the field at the 18um wire surface (~100kV/cm)
|
|
gas.SetFieldGrid(10., 150000., 20, True)
|
|
|
|
# 10 iterations is usually plenty for a simple mix
|
|
gas.GenerateGasTable(10)
|
|
gas.WriteGasFile(gas_file)
|
|
else:
|
|
print(f"Loading existing gas table: {gas_file}")
|
|
gas.LoadGasFile(gas_file)
|
|
|
|
# --- 3. FIELD MAP SETUP ---
|
|
fm = ROOT.Garfield.ComponentElmer()
|
|
|
|
# Update these filenames to match your Elmer SIF output exactly
|
|
# Assuming ElmerGrid was run on 'wires2d' directory
|
|
fm.Initialise("wires2d/mesh.nodes",
|
|
"wires2d/mesh.elements",
|
|
"wires2d/mesh.boundary",
|
|
"wires2d/elfield_anasen.result", "mm")
|
|
|
|
# Set the medium (Body 13 from your Gmsh script)
|
|
fm.SetMedium(0, gas)
|
|
|
|
# --- 4. SENSOR AND DRIFT SETUP ---
|
|
sensor = ROOT.Garfield.Sensor()
|
|
sensor.AddComponent(fm)
|
|
|
|
# Heavy Ion Drift (RKF) - Best for the general track
|
|
drift = ROOT.Garfield.DriftLineRKF()
|
|
drift.SetSensor(sensor)
|
|
|
|
# Electron Avalanche (Microscopic) - Best for high-field gain
|
|
aval = ROOT.Garfield.AvalancheMicroscopic()
|
|
aval.SetSensor(sensor)
|
|
|
|
# --- 5. EXECUTION ---
|
|
# Starting position (e.g., near the IC wires at r=23mm or closer to Anodes)
|
|
x0, y0, z0, t0 = 35.0, 0.0, 0.0, 0.0
|
|
|
|
print(f"Simulating heavy ion drift from r={x0}...")
|
|
drift.DriftIon(x0, y0, z0, t0)
|
|
|
|
print(f"Simulating electron avalanche from r={x0}...")
|
|
# AvalancheElectron(x, y, z, t, energy, dx, dy, dz)
|
|
aval.AvalancheElectron(x0, y0, z0, t0, 0.1, 0.0, 0.0, 0.0)
|
|
|
|
print("Simulation complete.") |