| .vscode | ||
| .gitignore | ||
| CanvasClass.cpp | ||
| CanvasClass.h | ||
| ClassData.h | ||
| ClassDigitizer.cpp | ||
| ClassDigitizer.h | ||
| CustomThreads.h | ||
| CustomWidgets.h | ||
| DataGenerator.cpp | ||
| DataReaderScript.cpp | ||
| DigiSettingsPanel.cpp | ||
| DigiSettingsPanel.h | ||
| EventBuilder.cpp | ||
| FSUDAQ_Qt6.pro | ||
| FSUDAQ.cpp | ||
| FSUDAQ.h | ||
| influxdb.cpp | ||
| influxdb.h | ||
| macro.h | ||
| main.cpp | ||
| Makefile_test | ||
| OnlineAnalyser.cpp | ||
| OnlineAnalyser.h | ||
| OnlineEventBuilder.cpp | ||
| OnlineEventBuilder.h | ||
| README.md | ||
| RegisterAddress.h | ||
| Scope.cpp | ||
| Scope.h | ||
| test_indep.cpp | ||
| test.cpp | ||
Introduction
This is a DAQ for 1st gen CAEN digitizer for V1725, V17255S, V1230 with PHA and PSD firmware.
It has scope (updated every half-sec), allow full control of the digitizer (except LVDS), and allow saving waevform.
It can be connected to InfluxDB v1.8 and Elog.
Required / Development enviroment
Ubuntu 22.04
CAENVMELib_v3.3
CAENCOmm_v1.5.3
CAENDigitizer_v2.17.1
sudo apt install qt6-base-dev libcurl4-openssl-dev libqt6charts6-dev elog
The elog installed using apt is 3.1.3. If a higher version is needed. Please go to https://elog.psi.ch/elog/
The libcurl4 is need for pushing data to InfluxDB v1.8
Compile
use qmake6 -project to generate the *.pro
in the *.pro, add
QT += core widgets charts
LIBS += -lCAENDigitizer -lcurl
then run qmake6 *.pro it will generate Makefile
then make