This branch holds versions of the ISEG GUI that work with the ISEG in lab 220. Not sure if it will work with others.

IsegGUI.py

@@ -134,6 +134,11 @@ class MyWindow(QMainWindow):
     gLayout.addWidget(self.AllChkOff, 2, 1)
     self.AllChkOff.clicked.connect(partial(self.SetAllOnOff))
 
+    #-------------------Jake added
+    self.btnReset = QPushButton("Reset Module Faults (Clear 10)")
+    gLayout.addWidget(self.btnReset, 2, 2)
+    self.btnReset.clicked.connect(self.ResetAction)
+
     #=========== set tab
     self.tabWidget = QTabWidget(self)
     layout.addWidget(self.tabWidget)
@@ -291,17 +296,22 @@ class MyWindow(QMainWindow):
     self.timer.start(int(sec * 1000))
 
   def SetHV(self, mod, ch):
+    # Use the actual channel address from our list
+    ch_addr = modChList[mod][ch] 
     value = float(self.txtV[mod][ch].text())
-    print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(value))
+    print(f"Setting Ch {ch_addr} to {value} V")
-    mpod.SetHV( mod*100 + ch, value)
+    
-    newValue = mpod.GetHV(mod*100+ch)
+    mpod.SetHV(ch_addr, value)
+    newValue = mpod.GetHV(ch_addr)
     self.txtV[mod][ch].setText("{:.1f}".format(newValue))
 
   def SetI(self, mod, ch):
+    ch_addr = modChList[mod][ch]
     value = float(self.txtI[mod][ch].text())
-    print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(value))
+    print(f"Setting Ch {ch_addr} limit to {value} mA")
-    mpod.SetCurrent( mod*100 + ch, value/1000.)
+    
-    newValue = mpod.GetCurrent(mod*100+ch)
+    mpod.SetCurrent(ch_addr, value/1000.)
+    newValue = mpod.GetCurrent(ch_addr)
     self.txtI[mod][ch].setText("{:.1f}".format(newValue))
 
   def SetAllOnOff(self):
@@ -316,17 +326,30 @@ class MyWindow(QMainWindow):
           time.sleep(0.01) # wait 10 mili-sec
 
     print("========== done")
+  #-------------Jake added
+  def ResetAction(self):
+    print("Clearing faults channel-by-channel...")
+    # Loop through all modules
+    for k in range(0, nMod):
+    # Loop through all channels in this module
+        for i, ch_addr in enumerate(modChList[k]):
+            # Reset each specific channel (e.g., 100, 101, 400...)
+            mpod.ResetChannel(ch_addr)
+            time.sleep(0.01) # 10ms delay to avoid flooding the SNMP bus
+    
+    time.sleep(0.5)
+    self.updateTimer()
+    print("Individual channel resets sent. Check if the 'OK' LED is green.")
 
   def SetOnOff(self, mod, ch):
+    ch_addr = modChList[mod][ch] # Get real address (e.g. 100)
     state = self.chkON[mod][ch].checkState()
+    
     if state == Qt.CheckState.Checked:
-      if onOffList[sum(nChPerMod[:mod]) + ch] == 3 :
+      # Use the address instead of the mod*100 math
-        mpod.SwitchOnHV(mod*100 + ch, 2)
+      mpod.SwitchOnHV(ch_addr, 1)
-      mpod.SwitchOnHV( mod*100 + ch, 1)
-      onOffList[sum(nChPerMod[:mod]) + ch] = 1
     else:
-      mpod.SwitchOnHV( mod*100 + ch, 0)
+      mpod.SwitchOnHV(ch_addr, 0)
-      onOffList[sum(nChPerMod[:mod]) + ch] = 0
 
     value = mpod.IsHVOn(mod*100 + ch)
     print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(state) + " | " + str(onOffList[sum(nChPerMod[:mod]) + ch]) + " | " + str(value))

IsegLibrary.py

@@ -232,6 +232,20 @@ class Mpod:
     except:
       print("either ch is not int or rate is not float")
 
+#-------------------------Jake added functions for a channel reset:
+  def ResetChannel(self, ch):
+      """Sends the clear events signal (10) to a specific channel."""
+      if (self.isConnected == False): return 0
+      # 10 is the magic number to clear latched trips/errors
+      return self.SendCmd(1, "outputSwitch.u" + str(ch) + " i " + str(10))
+
+  def ResetModule(self, modIndex):
+    """Sends the clear events signal to an entire module group."""
+    if (self.isConnected == False): return 0
+    # Try removing the 'u' prefix which is specific to output channels
+    # and using modIndex + 1 since SNMP tables are 1-indexed.
+    return self.SendCmd(1, "groupsSwitch." + str(modIndex + 1) + " i " + str(10))
+
 
 #===================== Auxliary function
 def SplitChList(chList):
@@ -249,6 +263,9 @@ def SplitChList(chList):
   for i in range(0, len(sep)-1):
     newChList.append( chList[sep[i]:sep[i+1]] )
   return newChList    
+
+
+
 #===================== SandBox
 
 #mpod = Mpod("128.186.111.101")