This branch holds versions of the ISEG GUI that work with the ISEG in lab 220. Not sure if it will work with others.

IsegGUI.py

@@ -21,11 +21,16 @@ except:
     token = None  # Or assign a default value if needed
 
 org = "FSUFoxLab"
-databaseIP="https://fsunuc.physics.fsu.edu/influx/"
-write_client = influxdb_client.InfluxDBClient(url=databaseIP, token=token, org=org)
+ip = "https://fsunuc.physics.fsu.edu/influx/"
+write_client = influxdb_client.InfluxDBClient(url=ip, token=token, org=org)
 bucket = "ISEG"
-# write_api = write_client.write_api(write_options=ASYNCHRONOUS)
-write_api = write_client.write_api(write_options=SYNCHRONOUS)
+write_api = write_client.write_api(write_options=ASYNCHRONOUS)
+
+#assign a port, to prevent the script run mulitple time
+s = socket.socket()
+host = socket.gethostname()
+port = 4305
+s.bind((host,port))
 
 nArg = len(sys.argv)
 
@@ -37,16 +42,9 @@ else :
 #Sergio MPOD 128.186.111.101
 #ANASEN MPOD 128.186.111.208
 
+databaseIP="128.186.111.108"
 pushToDB = False
 
-
-#============== assign a port, to prevent the script run mulitple time
-s = socket.socket()
-host = socket.gethostname()
-port = 4300 + int(IP[-3:])
-print("using port " + str(port))
-s.bind((host,port))
-
 #===================== GUI
 
 mpod = iseg.Mpod(IP)
@@ -110,7 +108,7 @@ class MyWindow(QMainWindow):
     gLayout.addWidget(lbIP, 0, 0)
     
     self.txtIP = QLineEdit(self)
-    self.txtIP.setText(databaseIP)
+    self.txtIP.setText("128.186.111.107")
     self.txtIP.textChanged.connect(partial(self.TextChange, self.txtIP))
     self.txtIP.returnPressed.connect(partial(self.UnSetTextColor, self.txtIP))
     gLayout.addWidget(self.txtIP, 0, 1)
@@ -132,13 +130,14 @@ class MyWindow(QMainWindow):
     self.txtRefresh.returnPressed.connect(partial(self.UnSetTextColor, self.txtRefresh))
     gLayout.addWidget(self.txtRefresh, 1, 1)
 
-    self.AllChkOn = QPushButton("Switch all channels On.")
-    gLayout.addWidget(self.AllChkOn, 2, 1)
-    self.AllChkOn.clicked.connect(partial(self.SwitchOnAllCh))
-
     self.AllChkOff = QPushButton("Switch all channels off.")
-    gLayout.addWidget(self.AllChkOff, 3, 1)
-    self.AllChkOff.clicked.connect(partial(self.SwitchOffAllCh))
+    gLayout.addWidget(self.AllChkOff, 2, 1)
+    self.AllChkOff.clicked.connect(partial(self.SetAllOnOff))
+
+    #-------------------Jake added
+    self.btnReset = QPushButton("Reset Module Faults (Clear 10)")
+    gLayout.addWidget(self.btnReset, 2, 2)
+    self.btnReset.clicked.connect(self.ResetAction)
 
     #=========== set tab
     self.tabWidget = QTabWidget(self)
@@ -271,11 +270,8 @@ class MyWindow(QMainWindow):
           # print(str(modID) + "," + str(chID))
 
           self.txtName[modID][chID].setText(row[0])
-          self.txtName[modID][chID].setStyleSheet("")
           self.txtV[modID][chID].setText(row[2])
-          self.txtV[modID][chID].setStyleSheet("")
           self.txtI[modID][chID].setText(row[3])
-          self.txtI[modID][chID].setStyleSheet("")
 
           # print("Setting " + row[1] )
           mpod.SetHV(int(ch[1:]), float(row[2]))
@@ -300,33 +296,25 @@ class MyWindow(QMainWindow):
     self.timer.start(int(sec * 1000))
 
   def SetHV(self, mod, ch):
+    # Use the actual channel address from our list
+    ch_addr = modChList[mod][ch] 
     value = float(self.txtV[mod][ch].text())
-    print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(value))
-    mpod.SetHV( mod*100 + ch, value)
-    newValue = mpod.GetHV(mod*100+ch)
+    print(f"Setting Ch {ch_addr} to {value} V")
+    
+    mpod.SetHV(ch_addr, value)
+    newValue = mpod.GetHV(ch_addr)
     self.txtV[mod][ch].setText("{:.1f}".format(newValue))
 
   def SetI(self, mod, ch):
+    ch_addr = modChList[mod][ch]
     value = float(self.txtI[mod][ch].text())
-    print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(value))
-    mpod.SetCurrent( mod*100 + ch, value/1000.)
-    newValue = mpod.GetCurrent(mod*100+ch) * 1000.
-    self.txtI[mod][ch].setText("{:.2f}".format(newValue))
+    print(f"Setting Ch {ch_addr} limit to {value} mA")
+    
+    mpod.SetCurrent(ch_addr, value/1000.)
+    newValue = mpod.GetCurrent(ch_addr)
+    self.txtI[mod][ch].setText("{:.1f}".format(newValue))
 
-  def SwitchOnAllCh(self):
-    for k in range(0, nMod):
-      for ch, a in enumerate(modChList[k]) :
-        state = self.chkON[k][ch].checkState()
-        if state !=  Qt.CheckState.Checked:
-          print("Switching On Mod-%d, ch-%d" % (k, ch))
-          mpod.SwitchOnHV( int(k) * 100 + int(ch), 1)
-          self.chkON[k][ch].setChecked(True)
-          onOffList[sum(nChPerMod[:k]) + ch] = 1
-          time.sleep(0.01) # wait 10 mili-sec
-
-    print("========== done")
-
-  def SwitchOffAllCh(self):
+  def SetAllOnOff(self):
     for k in range(0, nMod):
       for ch, a in enumerate(modChList[k]) :
         state = self.chkON[k][ch].checkState()
@@ -338,17 +326,30 @@ class MyWindow(QMainWindow):
           time.sleep(0.01) # wait 10 mili-sec
 
     print("========== done")
+  #-------------Jake added
+  def ResetAction(self):
+    print("Clearing faults channel-by-channel...")
+    # Loop through all modules
+    for k in range(0, nMod):
+    # Loop through all channels in this module
+        for i, ch_addr in enumerate(modChList[k]):
+            # Reset each specific channel (e.g., 100, 101, 400...)
+            mpod.ResetChannel(ch_addr)
+            time.sleep(0.01) # 10ms delay to avoid flooding the SNMP bus
+    
+    time.sleep(0.5)
+    self.updateTimer()
+    print("Individual channel resets sent. Check if the 'OK' LED is green.")
 
   def SetOnOff(self, mod, ch):
+    ch_addr = modChList[mod][ch] # Get real address (e.g. 100)
     state = self.chkON[mod][ch].checkState()
-    if state ==  Qt.CheckState.Checked:
-      if onOffList[sum(nChPerMod[:mod]) + ch] == 3 :
-        mpod.SwitchOnHV(mod*100 + ch, 2)
-      mpod.SwitchOnHV( mod*100 + ch, 1)
-      onOffList[sum(nChPerMod[:mod]) + ch] = 1
+    
+    if state == Qt.CheckState.Checked:
+      # Use the address instead of the mod*100 math
+      mpod.SwitchOnHV(ch_addr, 1)
     else:
-      mpod.SwitchOnHV( mod*100 + ch, 0)
-      onOffList[sum(nChPerMod[:mod]) + ch] = 0
+      mpod.SwitchOnHV(ch_addr, 0)
 
     value = mpod.IsHVOn(mod*100 + ch)
     print("mod : " +  str(mod) + ", ch : " + str(ch) + " | " +  str(state) + " | " + str(onOffList[sum(nChPerMod[:mod]) + ch]) + " | " + str(value))
@@ -385,7 +386,6 @@ class MyWindow(QMainWindow):
           points.append(Point("LeakageCurrent").tag("Ch",int(chList[i] + 100 * k)).field("value",float(outIList[sum(nChPerMod[:k]) + i])))
 
     if self.chkDB.checkState() == Qt.CheckState.Checked:
-      
       write_api.write(bucket=bucket, org=org, record=points)
 
 if __name__ == "__main__":

IsegLibrary.py

@@ -232,6 +232,20 @@ class Mpod:
     except:
       print("either ch is not int or rate is not float")
 
+#-------------------------Jake added functions for a channel reset:
+  def ResetChannel(self, ch):
+      """Sends the clear events signal (10) to a specific channel."""
+      if (self.isConnected == False): return 0
+      # 10 is the magic number to clear latched trips/errors
+      return self.SendCmd(1, "outputSwitch.u" + str(ch) + " i " + str(10))
+
+  def ResetModule(self, modIndex):
+    """Sends the clear events signal to an entire module group."""
+    if (self.isConnected == False): return 0
+    # Try removing the 'u' prefix which is specific to output channels
+    # and using modIndex + 1 since SNMP tables are 1-indexed.
+    return self.SendCmd(1, "groupsSwitch." + str(modIndex + 1) + " i " + str(10))
+
 
 #===================== Auxliary function
 def SplitChList(chList):
@@ -249,6 +263,9 @@ def SplitChList(chList):
   for i in range(0, len(sep)-1):
     newChList.append( chList[sep[i]:sep[i+1]] )
   return newChList    
+
+
+
 #===================== SandBox
 
 #mpod = Mpod("128.186.111.101")

README.md

@@ -2,7 +2,7 @@
 
 in Ubuntu 20+
 
-    ~>sudo apt install python3-pyqt6 snmp snmp-mibs-downloader curl python3-pip libxcb-cursor0
+    ~>sudo apt install python3-pyqt6 snmp snmp-mibs-downloader curl python3-pip
     ~>python3 -m pip install pyqt6 influxdb-client
 
 also, download the https://fsunuc.physics.fsu.edu/wiki/images/5/53/WIENER-CRATE-MIB.txt and put in /usr/share/snmp/mibs/
@@ -18,4 +18,4 @@ for influxDB V1, simply put the database IP. since 2024, we upgraded to influxDB
 
 # old GUI using PySimpleGUI
 
-Since the PySimpleGUI think user should register, so We use Qt6. The IsegHVController.py is no longer maintain.
+Since the PySimpleGUI think user should register, so We use Qt6. The IsegHVController.py is no longer maintain.