this is a DAQ development for SOLARIS DAQ using CAEN V2745 digitizers.
Go to file
2023-01-09 15:11:16 -05:00
.gitignore working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00
ClassDigitizer2Gen.cpp working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00
ClassDigitizer2Gen.h working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00
Makefile working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00
Parameter.h working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00
README.md add README.md 2022-12-02 17:44:14 -05:00
test_indep.cpp test_indep.cpp is done compare speed for 2 readout method 2023-01-09 15:11:16 -05:00
test.cpp working on test_indep.cpp for most simplifiest DAQ 2022-12-02 17:33:02 -05:00

Present Status

The basic communication with the digitizer is OK. The following need to be done

  • Should be hard code all the control paths?
  • compare raw and dpppha readout. It seems that raw readout is the better choice.
  • Decide the UI framework. ROOT Qt? GTK ? IMGUI? or Web-base interface?

Introduction

The SOLARIS (https://www.anl.gov/phy/solaris) is the 3rd installation of solenoidal spectrometer in the world. It is located at FRIB (https://frib.msu.edu/news/2021/solaris.html). The CAEN V2745 digitizers will be the heart of the the DAQ. This repository is the development of the DAQ control UI.

Requirement library

for a command line interface,

  1. CAEN Dig2 1.5.3
  2. CAEN FELib 1.2.1+

Compilation

simply make.