this is a DAQ development for SOLARIS DAQ using CAEN V2745 digitizers.

Go to file

Ryan Tang 2e35bac104 snapshot before changing saving data code		2023-01-18 18:14:19 -05:00
.vscode	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
.gitignore	save data take too many time	2023-01-09 18:22:33 -05:00
ClassDigitizer2Gen.cpp	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
ClassDigitizer2Gen.h	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
Event.h	snapshot	2023-01-13 17:35:37 -05:00
influxdb.cpp	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
influxdb.h	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
Makefile	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
Parameter.h	working on test_indep.cpp for most simplifiest DAQ	2022-12-02 17:33:02 -05:00
README.md	add README.md	2022-12-02 17:44:14 -05:00
script.C	use CAEN_FElib_Stop for stop ReadData, added influxDB	2023-01-18 18:10:31 -05:00
SolReader.h	snapshot	2023-01-13 17:35:37 -05:00
test_indep.cpp	save data take too many time	2023-01-09 18:22:33 -05:00
test.cpp	snapshot before changing saving data code	2023-01-18 18:14:19 -05:00

README.md

Present Status

The basic communication with the digitizer is OK. The following need to be done

Should be hard code all the control paths?
compare raw and dpppha readout. It seems that raw readout is the better choice.
Decide the UI framework. ROOT Qt? GTK ? IMGUI? or Web-base interface?

Introduction

The SOLARIS (https://www.anl.gov/phy/solaris) is the 3rd installation of solenoidal spectrometer in the world. It is located at FRIB (https://frib.msu.edu/news/2021/solaris.html). The CAEN V2745 digitizers will be the heart of the the DAQ. This repository is the development of the DAQ control UI.

Requirement library

for a command line interface,

CAEN Dig2 1.5.3
CAEN FELib 1.2.1+

Compilation

simply make.