tested with digitizer. Only the trigger map, board DCDC readings, should add a general inquiry tab

This commit is contained in:
Ryan Tang 2023-03-03 18:53:59 -05:00
parent fbd526c87d
commit 6be0b9400f
3 changed files with 106 additions and 6 deletions

View File

@ -107,7 +107,7 @@ std::string Digitizer2Gen::ReadValue(const char * parameter, bool verbose){
//printf(" %s|%s \n", __func__, parameter);
ret = CAEN_FELib_GetValue(handle, parameter, retValue);
if (ret != CAEN_FELib_Success) {
printf("%-45s\n", parameter);
printf("%-45s | read fail\n", parameter);
return ErrorMsg(__func__);
}else{
if( verbose ) printf("%-45s : %s\n", parameter, retValue);
@ -117,6 +117,7 @@ std::string Digitizer2Gen::ReadValue(const char * parameter, bool verbose){
std::string Digitizer2Gen::ReadValue(const Reg para, int ch_index, bool verbose){
std:: string ans = ReadValue(para.GetFullPara(ch_index).c_str(), verbose);
//printf("%s | %s \n", para.GetFullPara(ch_index).c_str(), ans.c_str());
int index = FindIndex(para);
switch( para.GetType()){
@ -214,7 +215,7 @@ int Digitizer2Gen::OpenDigitizer(const char * url){
ReadAllSettings();
serialNumber = atoi(ReadValue("/par/SerialNum").c_str());
FPGAType = GetSettingValue(DIGIPARA::DIG::FPGA_firmwareVersion);
FPGAType = GetSettingValue(DIGIPARA::DIG::FirmwareType);
nChannels = atoi(ReadValue("/par/NumCh").c_str());
int adcRate = atoi(GetSettingValue(DIGIPARA::DIG::ADC_SampleRate).c_str());
ch2ns = 1000/adcRate;
@ -752,7 +753,7 @@ void Digitizer2Gen::ReadAllSettings(){
for(int ch = 0; ch < nChannels ; ch++ ){
for( int i = 0; i < (int) chSettings[ch].size(); i++){
if( chSettings[ch][i].ReadWrite() == RW::WriteOnly) continue;
ReadValue(chSettings[ch][i], i);
ReadValue(chSettings[ch][i], ch);
}
}
}

View File

@ -3,6 +3,8 @@
#include <QLabel>
#include <QFileDialog>
#include <QStyledItemDelegate>
#include <QToolTip>
#include <QPoint>
std::vector<std::pair<std::string, Reg>> infoIndex = {{"Serial Num : ", DIGIPARA::DIG::SerialNumber},
{"IP : ", DIGIPARA::DIG::IPAddress},
@ -18,6 +20,44 @@ std::vector<std::pair<std::string, Reg>> infoIndex = {{"Serial Num : ",
{"Input Impedance [Ohm] : ", DIGIPARA::DIG::InputImpedance}
};
QStringList LEDToolTip = { "LED_JESD_Y_PASS" ,
"LED_JESD_H_PASS" ,
"LED_DDR4_0_PASS" ,
"LED_DDR4_1_PASS" ,
"LED_DDR4_2_PASS" ,
"LEDFP_FAIL" ,
"LEDFP_NIM" ,
"LEDFP_TTL" ,
"LEDFP_DTLOSS" ,
"LEDFP_DTRDY" ,
"LEDFP_TRG" ,
"LEDFP_RUN" ,
"LEDFP_PLL_LOCK" ,
"LEDFP_CLKOUT" ,
"LEDFP_CLKIN" ,
"LEDFP_USB" ,
"LEDFP_SFP_SD" ,
"LEDFP_SFP_ACT" ,
"LEDFP_ACT" } ;
QStringList ACQToolTip = {"Armed",
"Run",
"Run_mw",
"Jesd_Clk_Valid",
"Busy",
"PreTriggerReady",
"LicenceFail" };
QStringList chToolTip = { "Channel signal delay initialization status (1 = initial delay done)",
"Channel time filter initialization status (1 = time filter initialization done)",
"Channel energy filter initialization status (1 = energy filter initialization done)",
"Channel full initialization status (1 = initialization done)",
"Reserved",
"Channel enable acquisition status (1 = acq enabled)",
"Channel inner run status (1 = run active)",
"Time-energy event free space status (1 = time-energy can be written)",
"Waveform event free space status (1 = waveform can be written)"};
DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi, QWidget * parent) : QWidget(parent){
qDebug() << "DigiSettingsPanel constructor";
@ -93,7 +133,10 @@ DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi
LEDStatus[iDigi][i] = new QPushButton(tab);
LEDStatus[iDigi][i]->setEnabled(false);
LEDStatus[iDigi][i]->setFixedSize(QSize(30,30));
statusLayout->addWidget(LEDStatus[iDigi][i], 0, 1 + i);
LEDStatus[iDigi][i]->setToolTip(LEDToolTip[i]);
LEDStatus[iDigi][i]->setToolTipDuration(-1);
statusLayout->addWidget(LEDStatus[iDigi][i], 0, 1 + 19 - i);
}
//------- ACD Status
@ -105,7 +148,9 @@ DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi
ACQStatus[iDigi][i] = new QPushButton(tab);
ACQStatus[iDigi][i]->setEnabled(false);
ACQStatus[iDigi][i]->setFixedSize(QSize(30,30));
statusLayout->addWidget(ACQStatus[iDigi][i], 1, 1 + i);
ACQStatus[iDigi][i]->setToolTip(ACQToolTip[i]);
ACQStatus[iDigi][i]->setToolTipDuration(-1);
statusLayout->addWidget(ACQStatus[iDigi][i], 1, 1 + 7 - i);
}
//------- Temperatures
@ -135,6 +180,7 @@ DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi
leSettingFile[iDigi] = new QLineEdit(tab);
leSettingFile[iDigi]->setReadOnly(true);
leSettingFile[iDigi]->setText(QString::fromStdString(digi[iDigi]->GetSettingFileName()));
bnLayout->addWidget(leSettingFile[iDigi], rowId, 1, 1, 9);
//-------------------------------------
@ -621,6 +667,42 @@ DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi
QTabWidget * statusTab = new QTabWidget(tab);
chTabWidget->addTab(statusTab, "Status");
QGridLayout * layout = new QGridLayout(statusTab);
layout->setAlignment(Qt::AlignTop);
layout->setSpacing(0);
QLabel* lb0x = new QLabel("9-bit status", statusTab); lb0x->setAlignment(Qt::AlignHCenter); layout->addWidget(lb0x, 0, 1, 1, 9);
QLabel* lb0a = new QLabel("Gain Fact.", statusTab); lb0a->setAlignment(Qt::AlignHCenter); layout->addWidget(lb0a, 0, 10);
QLabel* lb1a = new QLabel("ADC->Volt", statusTab); lb1a->setAlignment(Qt::AlignHCenter); layout->addWidget(lb1a, 0, 11);
QLabel* lb1x = new QLabel("9-bit status", statusTab); lb1x->setAlignment(Qt::AlignHCenter); layout->addWidget(lb1x, 0, 13, 1, 9);
QLabel* lb0b = new QLabel("Gain Fact.", statusTab); lb0b->setAlignment(Qt::AlignHCenter); layout->addWidget(lb0b, 0, 22);
QLabel* lb1b = new QLabel("ADC->Volt", statusTab); lb1b->setAlignment(Qt::AlignHCenter); layout->addWidget(lb1b, 0, 23);
for( int ch = 0; ch < digi[iDigi]->GetNChannels(); ch ++){
QLabel * lb = new QLabel(" ch-" + QString::number(ch) + " ", statusTab);
lb->setAlignment(Qt::AlignRight | Qt::AlignCenter);
layout->addWidget(lb, 1 + ch/2, ch%2 * 12);
for( int k = 0 ; k < 9; k++){
chStatus[iDigi][ch][k] = new QPushButton(statusTab);
chStatus[iDigi][ch][k]->setEnabled(false);
chStatus[iDigi][ch][k]->setFixedSize(QSize(10,25));
chStatus[iDigi][ch][k]->setToolTip(chToolTip[k]);
chStatus[iDigi][ch][k]->setToolTipDuration(-1);
layout->addWidget(chStatus[iDigi][ch][k], 1 + ch/2, ch%2 * 12 + 9 - k); // arrange backward, so that it is like a bit-wise
}
chGainFactor[iDigi][ch] = new QLineEdit(statusTab);
chGainFactor[iDigi][ch]->setFixedWidth(100);
layout->addWidget(chGainFactor[iDigi][ch], 1 + ch/2, ch%2*12 + 10);
chADCToVolts[iDigi][ch] = new QLineEdit(statusTab);
chADCToVolts[iDigi][ch]->setFixedWidth(100);
layout->addWidget(chADCToVolts[iDigi][ch], 1 + ch/2, ch%2*12 + 11);
}
}
@ -815,6 +897,8 @@ DigiSettingsPanel::DigiSettingsPanel(Digitizer2Gen ** digi, unsigned short nDigi
} //=== end of tab
ShowSettingsToPanel();
enableSignalSlot = true;
}
@ -852,6 +936,7 @@ void DigiSettingsPanel::RefreshSettings(){
void DigiSettingsPanel::SaveSettings(){
//TODO default file Path
QString filePath = QFileDialog::getSaveFileName(this, "Save Settings File", "", "Data file (*.dat);;Text files (*.txt);;All files (*.*)");
if (!filePath.isEmpty()) {
@ -984,9 +1069,21 @@ void DigiSettingsPanel::ShowSettingsToPanel(){
FillSpinBoxValueFromMemory(spbTestPusleLowLevel[ID], DIGIPARA::DIG::TestPulseLowLevel);
FillSpinBoxValueFromMemory(spbTestPusleHighLevel[ID], DIGIPARA::DIG::TestPulseHighLevel);
//@============================== Channel setting
//@============================== Channel setting/ status
for( int ch = 0; ch < digi[ID]->GetNChannels(); ch++){
unsigned int status = atoi(digi[ID]->GetSettingValue(DIGIPARA::CH::ChannelStatus).c_str());
for( int i = 0; i < 9; i++){
if( (status >> i) & 0x1 ) {
chStatus[ID][ch][i]->setStyleSheet("background-color:green;");
}else{
chStatus[ID][ch][i]->setStyleSheet("");
}
}
chGainFactor[ID][ch]->setText(QString::fromStdString(digi[ID]->GetSettingValue(DIGIPARA::CH::GainFactor, ch)));
chADCToVolts[ID][ch]->setText(QString::fromStdString(digi[ID]->GetSettingValue(DIGIPARA::CH::ADCToVolts, ch)));
FillComboBoxValueFromMemory(cbbOnOff[ID][ch], DIGIPARA::CH::ChannelEnable, ch);
FillSpinBoxValueFromMemory(spbDCOffset[ID][ch], DIGIPARA::CH::DC_Offset, ch);
FillSpinBoxValueFromMemory(spbThreshold[ID][ch], DIGIPARA::CH::TriggerThreshold, ch);

View File

@ -505,6 +505,8 @@ void MainWindow::OpenDigitizers(){
digi[i]->ProgramPHA(false);
}
digi[i]->ReadAllSettings();
SetUpScalar();
bnOpenScalar->setEnabled(true);