#include "mainwindow.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include //------ static memeber Digitizer2Gen ** MainWindow::digi = NULL; MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent){ setWindowTitle("FSU SOLARIS DAQ"); setGeometry(500, 100, 1000, 500); QIcon icon("SOLARIS_favicon.png"); setWindowIcon(icon); nDigi = 0; digiSetting = NULL; influx = NULL; readDataThread = NULL; scope = NULL; runTimer = new QTimer(); connect(runTimer, &QTimer::timeout, this, &MainWindow::AutoRun); { scalar = new QMainWindow(this); scalar->setWindowTitle("Scalar"); scalar->setGeometry(0, 0, 1000, 800); QScrollArea * scopeScroll = new QScrollArea(scalar); scalar->setCentralWidget(scopeScroll); scopeScroll->setWidgetResizable(true); scopeScroll->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding); QWidget * layoutWidget = new QWidget(scalar); scopeScroll->setWidget(layoutWidget); scalarLayout = new QGridLayout(layoutWidget); scalarLayout->setSpacing(0); scalarLayout->setAlignment(Qt::AlignTop); leTrigger = NULL; leAccept = NULL; scalarThread = new ScalarThread(); connect(scalarThread, &ScalarThread::updataScalar, this, &MainWindow::UpdateScalar); } QWidget * mainLayoutWidget = new QWidget(this); setCentralWidget(mainLayoutWidget); QVBoxLayout * layoutMain = new QVBoxLayout(mainLayoutWidget); mainLayoutWidget->setLayout(layoutMain); {//====================== General QGroupBox * box1 = new QGroupBox("General", mainLayoutWidget); layoutMain->addWidget(box1); QGridLayout * layout1 = new QGridLayout(box1); bnProgramSettings = new QPushButton("Program Settings", this); connect(bnProgramSettings, &QPushButton::clicked, this, &MainWindow::ProgramSettingsPanel); bnNewExp = new QPushButton("New/Change/Reload Exp", this); connect(bnNewExp, &QPushButton::clicked, this, &MainWindow::SetupNewExpPanel); QLabel * lExpName = new QLabel("Exp Name ", this); lExpName->setAlignment(Qt::AlignRight | Qt::AlignCenter); leExpName = new QLineEdit("", this); leExpName->setAlignment(Qt::AlignHCenter); leExpName->setReadOnly(true); bnOpenScope = new QPushButton("Open scope", this); bnOpenScope->setEnabled(false); connect(bnOpenScope, &QPushButton::clicked, this, &MainWindow::OpenScope); bnOpenDigitizers = new QPushButton("Open Digitizers", this); connect(bnOpenDigitizers, SIGNAL(clicked()), this, SLOT(OpenDigitizers())); bnCloseDigitizers = new QPushButton("Close Digitizers", this); bnCloseDigitizers->setEnabled(false); connect(bnCloseDigitizers, SIGNAL(clicked()), this, SLOT(CloseDigitizers())); bnDigiSettings = new QPushButton("Digitizers Settings", this); bnDigiSettings->setEnabled(false); connect(bnDigiSettings, SIGNAL(clicked()), this, SLOT(OpenDigitizersSettings())); bnSOLSettings = new QPushButton("SOLARIS Settings", this); bnSOLSettings->setEnabled(false); //QPushButton * bnCustomCommand = new QPushButton("Command line", this); layout1->addWidget(bnProgramSettings, 0, 0); layout1->addWidget(bnNewExp, 0, 1); layout1->addWidget(lExpName, 0, 2); layout1->addWidget(leExpName, 0, 3); layout1->addWidget(bnOpenDigitizers, 1, 1); layout1->addWidget(bnCloseDigitizers, 1, 2, 1, 2); layout1->addWidget(bnOpenScope, 2, 0); layout1->addWidget(bnDigiSettings, 2, 1); layout1->addWidget(bnSOLSettings, 2, 2, 1, 2); layout1->setColumnStretch(0, 2); layout1->setColumnStretch(1, 2); layout1->setColumnStretch(2, 1); layout1->setColumnStretch(3, 1); } {//====================== ACD control QGroupBox * box2 = new QGroupBox("ACQ control", mainLayoutWidget); layoutMain->addWidget(box2); QGridLayout * layout2 = new QGridLayout(box2); QLabel * lbRawDataPath = new QLabel("Raw Data Path : ", this); lbRawDataPath->setAlignment(Qt::AlignRight | Qt::AlignCenter); leRawDataPath = new QLineEdit(this); leRawDataPath->setReadOnly(true); leRawDataPath->setStyleSheet("background-color: #F3F3F3;"); bnOpenScalar = new QPushButton("Open Scalar", this); bnOpenScalar->setEnabled(false); connect(bnOpenScalar, &QPushButton::clicked, this, &MainWindow::OpenScaler); QLabel * lbRunID = new QLabel("Run ID : ", this); lbRunID->setAlignment(Qt::AlignRight | Qt::AlignCenter); leRunID = new QLineEdit(this); leRunID->setAlignment(Qt::AlignHCenter); leRunID->setReadOnly(true); leRunID->setStyleSheet("background-color: #F3F3F3;"); chkSaveRun = new QCheckBox("Save Run", this); chkSaveRun->setChecked(true); chkSaveRun->setEnabled(false); cbAutoRun = new QComboBox(this); cbAutoRun->addItem("Single infinte", -1); cbAutoRun->addItem("Single 30 mins", 30); cbAutoRun->addItem("Single 60 mins", 60); cbAutoRun->addItem("Single 2 hrs", 120); cbAutoRun->addItem("Single 3 hrs", 180); cbAutoRun->addItem("Single 5 hrs", 300); cbAutoRun->addItem("Every 30 mins", -30); cbAutoRun->addItem("Every 60 mins", -60); cbAutoRun->addItem("Every 2 hrs", -120); cbAutoRun->addItem("Every 3 hrs", -180); cbAutoRun->addItem("Every 5 hrs", -300); cbAutoRun->setEnabled(false); bnStartACQ = new QPushButton("Start ACQ", this); bnStartACQ->setEnabled(false); connect(bnStartACQ, &QPushButton::clicked, this, &MainWindow::StartACQ); bnStopACQ = new QPushButton("Stop ACQ", this); bnStopACQ->setEnabled(false); connect(bnStopACQ, &QPushButton::clicked, this, &MainWindow::StopACQ); QLabel * lbRunComment = new QLabel("Run Comment : ", this); lbRunComment->setAlignment(Qt::AlignRight | Qt::AlignCenter); leRunComment = new QLineEdit(this); leRunComment->setReadOnly(true); leRunComment->setStyleSheet("background-color: #F3F3F3;"); layout2->addWidget(lbRawDataPath, 0, 0); layout2->addWidget(leRawDataPath, 0, 1, 1, 4); layout2->addWidget(bnOpenScalar, 0, 5); layout2->addWidget(lbRunID, 1, 0); layout2->addWidget(leRunID, 1, 1); layout2->addWidget(chkSaveRun, 1, 2); layout2->addWidget(cbAutoRun, 1, 3); layout2->addWidget(bnStartACQ, 1, 4); layout2->addWidget(bnStopACQ, 1, 5); layout2->addWidget(lbRunComment, 2, 0); layout2->addWidget(leRunComment, 2, 1, 1, 5); layout2->setColumnStretch(0, 2); layout2->setColumnStretch(1, 1); layout2->setColumnStretch(2, 1); layout2->setColumnStretch(3, 1); layout2->setColumnStretch(4, 3); layout2->setColumnStretch(5, 3); } layoutMain->addStretch(); {//===================== Log Msg QGroupBox * box3 = new QGroupBox("Log Message", mainLayoutWidget); layoutMain->addWidget(box3); layoutMain->setStretchFactor(box3, 1); QVBoxLayout * layout3 = new QVBoxLayout(box3); logInfo = new QPlainTextEdit(this); logInfo->isReadOnly(); QFont font; font.setFamily("Courier New"); logInfo->setFont(font); layout3->addWidget(logInfo); } LogMsg("Welcome to SOLARIS DAQ."); if( LoadProgramSettings() ) LoadExpSettings(); } MainWindow::~MainWindow(){ //---- may be no need to delete as thay are child of this //delete bnProgramSettings; //delete bnOpenDigitizers; //delete bnCloseDigitizers; //delete bnDigiSettings; //delete bnNewExp; //delete logInfo; printf("- %s\n", __func__); printf("-------- Delete readData Thread\n"); if( digi ){ for( int i = 0; i < nDigi ; i++){ if( digi[i]->IsDummy()) continue; //printf("=== %d %p\n", i, readDataThread[i]); if( readDataThread[i]->isRunning()) StopACQ(); } } CloseDigitizers(); printf("-------- Delete scalar Thread\n"); DeleteTriggerLineEdit(); delete scalarThread; //---- need manually delete printf("-------- delete scope\n"); if( scope != NULL ) delete scope; printf("-------- delete digiSetting\n"); if( digiSetting != NULL ) delete digiSetting; printf("-------- delete influx\n"); if( influx != NULL ) delete influx; } //^################################################################ ACQ control void MainWindow::StartACQ(){ if( chkSaveRun->isChecked() ){ runID ++; leRunID->setText(QString::number(runID)); runIDStr = QString::number(runID).rightJustified(3, '0'); LogMsg("=========================== Start Run-" + runIDStr + ""); //============ start comment //if( cbAutoRun->currentData().toInt() > 0 ){ QDialog * dOpen = new QDialog(this); dOpen->setWindowTitle("Start Run Comment"); dOpen->setWindowFlags(Qt::Dialog | Qt::WindowTitleHint | Qt::CustomizeWindowHint); dOpen->setMinimumWidth(600); connect(dOpen, &QDialog::finished, dOpen, &QDialog::deleteLater); QGridLayout * vlayout = new QGridLayout(dOpen); QLabel *label = new QLabel("Enter Run comment for Run-" + runIDStr + " : ", dOpen); QLineEdit *lineEdit = new QLineEdit(dOpen); QPushButton *button1 = new QPushButton("OK", dOpen); QPushButton *button2 = new QPushButton("Cancel", dOpen); vlayout->addWidget(label, 0, 0, 1, 2); vlayout->addWidget(lineEdit, 1, 0, 1, 2); vlayout->addWidget(button1, 2, 0); vlayout->addWidget(button2, 2, 1); connect(button1, &QPushButton::clicked, dOpen, &QDialog::accept); connect(button2, &QPushButton::clicked, dOpen, &QDialog::reject); int result = dOpen->exec(); if(result == QDialog::Accepted ){ startComment = lineEdit->text(); if( startComment == "") startComment = "No commet was typed."; leRunComment->setText(startComment); }else{ LogMsg("Start Run aborted. "); return; } //} //TODO ============ elog QString elogMsg = "=============== Run-" + runIDStr + "
" + QDateTime::currentDateTime().toString("yyyy-MM-dd hh:mm:ss.z") + "
" + "comment : " + startComment + "
" + + "----------------------------------------------"; WriteElog(elogMsg, "Run-" + runIDStr, "Run", runID); //TODO ============ update expName.sh WriteExpNameSh(); }else{ LogMsg("=========================== Start no-save Run"); } //============================= start digitizer for( int i =0 ; i < nDigi; i ++){ if( digi[i]->IsDummy () ) continue; //digi[i]->Reset(); //digi[i]->ProgramPHA(false); digi[i]->SetPHADataFormat(1);// only save 1 trace digi[i]->WriteValue("/ch/0..63/par/WaveAnalogProbe0", "ADCInput"); if( chkSaveRun->isChecked() ){ QString outFileName = rawDataFolder + "/" + expName + "_" + runIDStr+ "_" + QString::number(digi[i]->GetSerialNumber()); qDebug() << outFileName; digi[i]->OpenOutFile(outFileName.toStdString());// overwrite } digi[i]->StartACQ(); //TODO ========================== Sync start. readDataThread[i]->SetSaveData(chkSaveRun->isChecked()); readDataThread[i]->start(); } if( !scalar->isVisible() ) scalar->show(); lbScalarACQStatus->setText("ACQ On"); scalarThread->start(); bnStartACQ->setEnabled(false); bnStopACQ->setEnabled(true); bnOpenScope->setEnabled(false); chkSaveRun->setEnabled(false); cbAutoRun->setEnabled(false); if( digiSetting ) digiSetting->EnableControl(); //TODO ======= Auto Run if( cbAutoRun->currentIndex() > 0 ){ int timeMinite = cbAutoRun->currentData().toInt(); runTimer->start(timeMinite * 60 * 1000); // unit is msec } } void MainWindow::StopACQ(){ if( chkSaveRun->isChecked() ){ //============ stop comment QDialog * dOpen = new QDialog(this); dOpen->setWindowTitle("Stop Run Comment"); dOpen->setWindowFlags(Qt::Dialog | Qt::WindowTitleHint | Qt::CustomizeWindowHint); dOpen->setMinimumWidth(600); connect(dOpen, &QDialog::finished, dOpen, &QDialog::deleteLater); QGridLayout * vlayout = new QGridLayout(dOpen); QLabel *label = new QLabel("Enter Run comment for ending Run-" + runIDStr + " : ", dOpen); QLineEdit *lineEdit = new QLineEdit(dOpen); QPushButton *button1 = new QPushButton("OK", dOpen); QPushButton *button2 = new QPushButton("Cancel", dOpen); vlayout->addWidget(label, 0, 0, 1, 2); vlayout->addWidget(lineEdit, 1, 0, 1, 2); vlayout->addWidget(button1, 2, 0); vlayout->addWidget(button2, 2, 1); connect(button1, &QPushButton::clicked, dOpen, &QDialog::accept); connect(button2, &QPushButton::clicked, dOpen, &QDialog::reject); int result = dOpen->exec(); if(result == QDialog::Accepted ){ stopComment = lineEdit->text(); if( stopComment == "") stopComment = "No commet was typed."; leRunComment->setText(stopComment); }else{ LogMsg("Cancel Run aborted. "); return; } } //TODO ======= Stop the Auto Run runTimer->stop(); //=============== Stop digitizer for( int i = 0; i < nDigi; i++){ if( digi[i]->IsDummy () ) continue; digi[i]->StopACQ(); if( readDataThread[i]->isRunning()){ readDataThread[i]->quit(); readDataThread[i]->wait(); } if( chkSaveRun->isChecked() ) digi[i]->CloseOutFile(); } if( scalarThread->isRunning()){ scalarThread->Stop(); scalarThread->quit(); scalarThread->wait(); } if( chkSaveRun->isChecked() ){ LogMsg("=========================== Run-" + runIDStr + " stopped."); }else{ LogMsg("=========================== no-Save Run stopped."); } bnStartACQ->setEnabled(true); bnStopACQ->setEnabled(false); bnOpenScope->setEnabled(true); chkSaveRun->setEnabled(true); if( digiSetting ) digiSetting->EnableControl(); if( chkSaveRun->isChecked() ){ //TODO ============= elog QString msg = QDateTime::currentDateTime().toString("yyyy-MM-dd hh:mm:ss.z") + "
"; for( int i = 0; i < nDigi; i++){ if( digi[i]->IsDummy () ) continue; msg += "FileSize ("+ QString::number(digi[i]->GetSerialNumber()) +"): " + QString::number(digi[i]->GetTotalFilesSize()/1024./1024.) + " MB
"; } msg += "comment : " + stopComment + "
" + "======================"; AppendElog(msg, chromeWindowID); } lbScalarACQStatus->setText("ACQ Off"); //if( scalarThread->isRunning()) printf("Scalar Thread still running.\n"); //if( scalarThread->isFinished()) printf("Scalar Thread finsihed.\n"); } void MainWindow::AutoRun(){ if( cbAutoRun->currentData().toInt() > 0 ){ //---- stop run }else{ //----- stop run and start a new run } } //^###################################################################### open and close digitizer void MainWindow::OpenDigitizers(){ LogMsg("Opening " + QString::number(nDigi) + " Digitizers..... "); digi = new Digitizer2Gen*[nDigi]; readDataThread = new ReadDataThread*[nDigi]; for( int i = 0; i < nDigi; i++){ LogMsg("IP : " + IPList[i] + " | " + QString::number(i+1) + "/" + QString::number(nDigi)); digi[i] = new Digitizer2Gen(); digi[i]->OpenDigitizer(("dig2://" + IPList[i]).toStdString().c_str()); if(digi[i]->IsConnected()){ LogMsg("Opened digitizer : " + QString::number(digi[i]->GetSerialNumber()) + ""); readDataThread[i] = new ReadDataThread(digi[i], this); connect(readDataThread[i], &ReadDataThread::sendMsg, this, &MainWindow::LogMsg); //connect(readDataThread[i], &ReadDataThread::checkFileSize, this, &MainWindow::CheckOutFileSize); //connect(readDataThread[i], &ReadDataThread::endOfLastData, this, &MainWindow::CheckOutFileSize); //*------ search for settings_XXXX.dat QString settingFile = analysisPath + "/settings_" + QString::number(digi[i]->GetSerialNumber()) + ".dat"; if( digi[i]->LoadSettingsFromFile( settingFile.toStdString().c_str() ) ){ LogMsg("Found setting file " + settingFile + " and loading. please wait."); digi[i]->SetSettingFileName(settingFile.toStdString()); LogMsg("done settings."); }else{ LogMsg("Unable to found setting file " + settingFile + ". "); digi[i]->SetSettingFileName(""); LogMsg("Reset digitizer And set default PHA settings."); digi[i]->Reset(); digi[i]->ProgramPHA(false); } digi[i]->ReadAllSettings(); SetUpScalar(); bnStartACQ->setEnabled(true); bnStopACQ->setEnabled(false); bnOpenScope->setEnabled(true); chkSaveRun->setEnabled(true); bnOpenDigitizers->setEnabled(false); bnOpenDigitizers->setStyleSheet(""); //cbAutoRun->setEnabled(true); cbAutoRun->setEnabled(false); bnOpenScalar->setEnabled(true); }else{ digi[i]->SetDummy(i); LogMsg("Cannot open digitizer. Use a dummy with serial number " + QString::number(i) + " and " + QString::number(digi[i]->GetNChannels()) + " ch."); readDataThread[i] = NULL; } } bnDigiSettings->setEnabled(true); bnCloseDigitizers->setEnabled(true); bnProgramSettings->setEnabled(false); bnNewExp->setEnabled(false); } void MainWindow::CloseDigitizers(){ if( digi == NULL) return; scalar->close(); DeleteTriggerLineEdit(); // this use digi->GetNChannels(); if( scope != NULL ){ scope->close(); delete scope; scope = NULL; } if( digiSetting != NULL ){ digiSetting->close(); delete digiSetting; digiSetting = NULL; } for( int i = 0; i < nDigi; i++){ if( digi[i] == NULL) return; digi[i]->CloseDigitizer(); delete digi[i]; LogMsg("Closed Digitizer : " + QString::number(digi[i]->GetSerialNumber())); if( digiSetting != NULL ) digiSetting->close(); if( readDataThread[i] != NULL ){ readDataThread[i]->quit(); readDataThread[i]->wait(); delete readDataThread[i]; } } delete [] digi; delete [] readDataThread; digi = NULL; readDataThread = NULL; bnOpenDigitizers->setEnabled(true); bnOpenDigitizers->setFocus(); bnCloseDigitizers->setEnabled(false); bnDigiSettings->setEnabled(false); bnStartACQ->setEnabled(false); bnStopACQ->setEnabled(false); bnOpenScope->setEnabled(false); bnOpenScalar->setEnabled(false); chkSaveRun->setEnabled(false); cbAutoRun->setEnabled(false); bnProgramSettings->setEnabled(true); bnNewExp->setEnabled(true); } //^###################################################################### Open Scope void MainWindow::OpenScope(){ if( digi ){ if( !scope ){ scope = new Scope(digi, nDigi, readDataThread); connect(scope, &Scope::CloseWindow, this, [=](){ bnStartACQ->setEnabled(true); }); connect(scope, &Scope::UpdateScalar, this, &MainWindow::UpdateScalar); connect(scope, &Scope::SendLogMsg, this, &MainWindow::LogMsg); if( digiSetting ) { connect(scope, &Scope::UpdateSettingsPanel, digiSetting, &DigiSettingsPanel::ShowSettingsToPanel); connect(scope, &Scope::TellSettingsPanelControlOnOff, digiSetting, &DigiSettingsPanel::EnableControl); connect(digiSetting, &DigiSettingsPanel::UpdateScopeSetting, scope, &Scope::ReadScopeSettings); digiSetting->EnableControl(); } }else{ scope->show(); digiSetting->EnableControl(); } } bnStartACQ->setEnabled(false); } //^###################################################################### Open digitizer setting panel void MainWindow::OpenDigitizersSettings(){ LogMsg("Open digitizers Settings Panel"); if( digiSetting == NULL){ digiSetting = new DigiSettingsPanel(digi, nDigi); connect(digiSetting, &DigiSettingsPanel::SendLogMsg, this, &MainWindow::LogMsg); if( scope ) { connect(scope, &Scope::UpdateSettingsPanel, digiSetting, &DigiSettingsPanel::ShowSettingsToPanel); connect(scope, &Scope::TellSettingsPanelControlOnOff, digiSetting, &DigiSettingsPanel::EnableControl); connect(digiSetting, &DigiSettingsPanel::UpdateScopeSetting, scope, &Scope::ReadScopeSettings); } }else{ digiSetting->show(); } } //^###################################################################### Open Scaler, when DAQ is running void MainWindow::OpenScaler(){ scalar->show(); } void MainWindow::SetUpScalar(){ scalar->setGeometry(0, 0, 10 + nDigi * 230, 800); lbLastUpdateTime = new QLabel("Last update : "); lbLastUpdateTime->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbLastUpdateTime, 0, 1, 1, 1 + nDigi); lbScalarACQStatus = new QLabel("ACQ status"); lbScalarACQStatus->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbScalarACQStatus, 1, 1, 1, 1 + nDigi); ///==== create the 1st row int rowID = 3; for( int ch = 0; ch < MaxNumberOfChannel; ch++){ if( ch == 0 ){ QLabel * lbCH_H = new QLabel("Ch", scalar); scalarLayout->addWidget(lbCH_H, rowID, 0); } rowID ++; QLabel * lbCH = new QLabel(QString::number(ch), scalar); lbCH->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbCH, rowID, 0); } ///===== create the trigger and accept leTrigger = new QLineEdit**[nDigi]; leAccept = new QLineEdit**[nDigi]; for( int iDigi = 0; iDigi < nDigi; iDigi++){ rowID = 2; leTrigger[iDigi] = new QLineEdit *[digi[iDigi]->GetNChannels()]; leAccept[iDigi] = new QLineEdit *[digi[iDigi]->GetNChannels()]; for( int ch = 0; ch < MaxNumberOfChannel; ch++){ if( ch == 0 ){ QLabel * lbDigi = new QLabel("Digi-" + QString::number(digi[iDigi]->GetSerialNumber()), scalar); lbDigi->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbDigi, rowID, 2*iDigi+1, 1, 2); rowID ++; QLabel * lbA = new QLabel("Trig. [Hz]", scalar); lbA->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbA, rowID, 2*iDigi+1); QLabel * lbB = new QLabel("Accp. [Hz]", scalar); lbB->setAlignment(Qt::AlignCenter); scalarLayout->addWidget(lbB, rowID, 2*iDigi+2); } rowID ++; leTrigger[iDigi][ch] = new QLineEdit(); leTrigger[iDigi][ch]->setReadOnly(true); leTrigger[iDigi][ch]->setAlignment(Qt::AlignRight); scalarLayout->addWidget(leTrigger[iDigi][ch], rowID, 2*iDigi+1); leAccept[iDigi][ch] = new QLineEdit(); leAccept[iDigi][ch]->setReadOnly(true); leAccept[iDigi][ch]->setAlignment(Qt::AlignRight); leAccept[iDigi][ch]->setStyleSheet("background-color: #F0F0F0;"); scalarLayout->addWidget(leAccept[iDigi][ch], rowID, 2*iDigi+2); } } } void MainWindow::DeleteTriggerLineEdit(){ if( leTrigger == NULL ) return; for( int i = 0; i < nDigi; i++){ for( int ch = 0; ch < digi[i]->GetNChannels(); ch ++){ delete leTrigger[i][ch]; delete leAccept[i][ch]; } delete [] leTrigger[i]; delete [] leAccept[i]; } delete [] leTrigger; leTrigger = NULL; leAccept = NULL; } void MainWindow::UpdateScalar(){ if( !digi ) return; lbLastUpdateTime->setText("Last update: " + QDateTime::currentDateTime().toString("MM.dd hh:mm:ss")); if( influx ) influx->ClearDataPointsBuffer(); std::string haha[MaxNumberOfChannel] = {""}; double acceptRate[MaxNumberOfChannel] = {0}; ///===== Get trigger for all channel for( int iDigi = 0; iDigi < nDigi; iDigi ++ ){ if( digi[iDigi]->IsDummy() ) return; //=========== use ReadStat to get the trigger rate //digiMTX.lock(); //digi[iDigi]->ReadStat(); // digitizer update it every 500 msec; //digiMTX.unlock(); //for( int ch = 0; ch < digi[iDigi]->GetNChannels(); ch ++){ // leTrigger[iDigi][ch]->setText(QString::number(digi[iDigi]->GetTriggerCount(ch)*1e9*1.0/ digi[iDigi]->GetRealTime(ch))); //} //=========== another method, directly readValue digiMTX.lock(); for( int ch = 0; ch < digi[iDigi]->GetNChannels(); ch ++){ std::string time = digi[iDigi]->ReadValue(PHA::CH::ChannelRealtime, ch); // for refreashing SelfTrgRate and SavedCount haha[ch] = digi[iDigi]->ReadValue(PHA::CH::SelfTrgRate, ch); leTrigger[iDigi][ch]->setText(QString::fromStdString(haha[ch])); std::string kaka = digi[iDigi]->ReadValue(PHA::CH::ChannelSavedCount, ch); acceptRate[ch] = atoi(kaka.c_str())*1e9*1.0 / atol(time.c_str()); //if( kaka != "0" ) printf("%s, %s | %.2f\n", time.c_str(), kaka.c_str(), acceptRate); leAccept[iDigi][ch]->setText(QString::number(acceptRate[ch],'f', 1)); } digiMTX.unlock(); ///============== push the trigger, acceptRate rate database if( influx ){ for( int ch = 0; ch < digi[iDigi]->GetNChannels(); ch++ ){ influx->AddDataPoint("Rate,Bd=" + std::to_string(digi[iDigi]->GetSerialNumber()) + ",Ch=" + std::to_string(ch) + " value=" + haha[ch]); if( !std::isnan(acceptRate[ch]) ) influx->AddDataPoint("AccpRate,Bd=" + std::to_string(digi[iDigi]->GetSerialNumber()) + ",Ch=" + std::to_string(ch) + " value=" + std::to_string(acceptRate[ch])); } } } if( influx && influx->GetDataLength() > 0 ){ //influx->PrintDataPoints(); influx->WriteData(DatabaseName.toStdString()); influx->ClearDataPointsBuffer(); } } //^###################################################################### Program Settings void MainWindow::ProgramSettingsPanel(){ LogMsg("Open Program Settings."); QDialog dialog(this); dialog.setWindowTitle("Program Settings"); dialog.setGeometry(0, 0, 700, 530); dialog.setWindowFlags(Qt::Dialog | Qt::WindowTitleHint); QGridLayout * layout = new QGridLayout(&dialog); layout->setVerticalSpacing(5); unsigned int rowID = 0; //-------- Instruction QPlainTextEdit * helpInfo = new QPlainTextEdit(&dialog); helpInfo->setReadOnly(true); helpInfo->setStyleSheet("background-color: #F3F3F3;"); helpInfo->setLineWrapMode(QPlainTextEdit::LineWrapMode::WidgetWidth); helpInfo->appendHtml("These setting will be saved at the \ Settings Save Path as programSettings.txt. \ If no such file exist, the program will create it."); helpInfo->appendHtml("

"); helpInfo->appendHtml(" Analysis Path is the path of \ the folder of the analysis code. e.g. /home//analysis/"); helpInfo->appendHtml(" Data Path is the path of the \ parents folder of Raw data will store. e.g. /mnt/data0/, \ experiment data will be saved under this folder. e.g. /mnt/data1/exp1"); helpInfo->appendHtml("

"); helpInfo->appendHtml("These 2 paths will be used when New/Change/Reload Exp "); helpInfo->appendHtml("

"); helpInfo->appendHtml(" Digitizers IP List is the list of IP \ digi of the digitizers IP. Break by \",\", continue by \"-\". e.g. 192.168.0.100,102 for 2 digitizers, or 192.168.0.100-102 for 3 digitizers."); helpInfo->appendHtml("

"); helpInfo->appendHtml(" Database IP or Elog IP can be empty. In that case, no database and elog will be used."); layout->addWidget(helpInfo, rowID, 0, 1, 4); //-------- analysis Path rowID ++; QLabel *lbSaveSettingPath = new QLabel("Settings Save Path", &dialog); lbSaveSettingPath->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbSaveSettingPath, rowID, 0); lSaveSettingPath = new QLineEdit(settingFilePath, &dialog); layout->addWidget(lSaveSettingPath, rowID, 1, 1, 2); QPushButton * bnSaveSettingPath = new QPushButton("browser", &dialog); layout->addWidget(bnSaveSettingPath, rowID, 3); connect(bnSaveSettingPath, &QPushButton::clicked, this, [=](){this->OpenDirectory(0);}); //-------- analysis Path rowID ++; QLabel *lbAnalysisPath = new QLabel("Analysis Path", &dialog); lbAnalysisPath->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbAnalysisPath, rowID, 0); lAnalysisPath = new QLineEdit(analysisPath, &dialog); layout->addWidget(lAnalysisPath, rowID, 1, 1, 2); QPushButton * bnAnalysisPath = new QPushButton("browser", &dialog); layout->addWidget(bnAnalysisPath, rowID, 3); connect(bnAnalysisPath, &QPushButton::clicked, this, [=](){this->OpenDirectory(1);}); //-------- data Path rowID ++; QLabel *lbDataPath = new QLabel("Data Path", &dialog); lbDataPath->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbDataPath, rowID, 0); lDataPath = new QLineEdit(dataPath, &dialog); layout->addWidget(lDataPath, rowID, 1, 1, 2); QPushButton * bnDataPath = new QPushButton("browser", &dialog); layout->addWidget(bnDataPath, rowID, 3); connect(bnDataPath, &QPushButton::clicked, this, [=](){this->OpenDirectory(2);}); //-------- IP Domain rowID ++; QLabel *lbIPDomain = new QLabel("Digitizers IP List", &dialog); lbIPDomain->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbIPDomain, rowID, 0); lIPDomain = new QLineEdit(IPListStr, &dialog); layout->addWidget(lIPDomain, rowID, 1, 1, 2); //-------- DataBase IP rowID ++; QLabel *lbDatbaseIP = new QLabel("Database IP", &dialog); lbDatbaseIP->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbDatbaseIP, rowID, 0); lDatbaseIP = new QLineEdit(DatabaseIP, &dialog); layout->addWidget(lDatbaseIP, rowID, 1, 1, 2); //-------- DataBase name rowID ++; QLabel *lbDatbaseName = new QLabel("Database Name", &dialog); lbDatbaseName->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbDatbaseName, rowID, 0); lDatbaseName = new QLineEdit(DatabaseName, &dialog); layout->addWidget(lDatbaseName, rowID, 1, 1, 2); //-------- Elog IP rowID ++; QLabel *lbElogIP = new QLabel("Elog IP", &dialog); lbElogIP->setAlignment(Qt::AlignRight | Qt::AlignCenter); layout->addWidget(lbElogIP, rowID, 0); lElogIP = new QLineEdit(ElogIP, &dialog); layout->addWidget(lElogIP, rowID, 1, 1, 2); rowID ++; QPushButton *button1 = new QPushButton("OK and Save", &dialog); layout->addWidget(button1, rowID, 1); QObject::connect(button1, &QPushButton::clicked, this, &MainWindow::SaveProgramSettings); QObject::connect(button1, &QPushButton::clicked, &dialog, &QDialog::accept); QPushButton *button2 = new QPushButton("Cancel", &dialog); layout->addWidget(button2, rowID, 2); QObject::connect(button2, &QPushButton::clicked, this, [=](){this->LogMsg("Cancel Program Settings");}); QObject::connect(button2, &QPushButton::clicked, &dialog, &QDialog::reject); layout->setColumnStretch(0, 2); layout->setColumnStretch(1, 2); layout->setColumnStretch(2, 2); layout->setColumnStretch(3, 1); dialog.exec(); } void MainWindow::OpenDirectory(int id){ QFileDialog fileDialog(this); fileDialog.setFileMode(QFileDialog::Directory); fileDialog.exec(); //qDebug() << fileDialog.selectedFiles(); switch (id){ case 0 : lSaveSettingPath->setText(fileDialog.selectedFiles().at(0)); break; case 1 : lAnalysisPath->setText(fileDialog.selectedFiles().at(0)); break; case 2 : lDataPath->setText(fileDialog.selectedFiles().at(0)); break; } } bool MainWindow::LoadProgramSettings(){ QString settingFile = QDir::current().absolutePath() + "/programSettings.txt"; LogMsg("Loading " + settingFile + " for Program Settings."); QFile file(settingFile); bool ret = false; if( !file.open(QIODevice::Text | QIODevice::ReadOnly) ) { LogMsg("" + settingFile + " not found."); LogMsg("Please Open the Program Settings "); }else{ QTextStream in(&file); QString line = in.readLine(); int count = 0; while( !line.isNull()){ if( line.left(6) == "//----") break; switch (count){ case 0 : settingFilePath = line; break; case 1 : analysisPath = line; break; case 2 : dataPath = line; break; case 3 : IPListStr = line; break; case 4 : DatabaseIP = line; break; case 5 : DatabaseName = line; break; case 6 : ElogIP = line; break; } count ++; line = in.readLine(); } if( count == 7 ) { logMsgHTMLMode = false; LogMsg("Setting File Path : " + settingFilePath); LogMsg(" Analysis Path : " + analysisPath); LogMsg(" Data Path : " + dataPath); LogMsg(" Digi. IP List : " + IPListStr); LogMsg(" Database IP : " + DatabaseIP); LogMsg(" Database Name : " + DatabaseName); LogMsg(" ElogIP : " + ElogIP); logMsgHTMLMode = true; ret = true; }else{ LogMsg("Settings are not complete."); LogMsg("Please Open the Program Settings "); } } if( ret ){ DecodeIPList(); SetupInflux(); return true; }else{ bnProgramSettings->setStyleSheet("color: red;"); bnNewExp->setEnabled(false); bnOpenDigitizers->setEnabled(false); return false; } } void MainWindow::DecodeIPList(){ //------- decode IPListStr nDigi = 0; IPList.clear(); QStringList parts = IPListStr.split("."); QString IPDomain = parts[0] + "." + parts[1] + "." + parts[2] + "."; parts = parts[3].split(","); for(int i = 0; i < parts.size(); i++){ if( parts[i].indexOf("-") != -1){ QStringList haha = parts[i].split("-"); for( int j = haha[0].toInt(); j <= haha.last().toInt(); j++){ IPList << IPDomain + QString::number(j); } }else{ IPList << IPDomain + parts[i]; } } nDigi = IPList.size(); } void MainWindow::SetupInflux(){ if( influx ) { delete influx; influx = NULL; } if( DatabaseIP != ""){ influx = new InfluxDB(DatabaseIP.toStdString(), false); if( influx->TestingConnection() ){ LogMsg(" InfluxDB URL ("+ DatabaseIP + ") is Valid "); //==== chck database exist LogMsg("List of database:"); std::vector databaseList = influx->GetDatabaseList(); bool foundDatabase = false; for( int i = 0; i < (int) databaseList.size(); i++){ if( databaseList[i] == DatabaseName.toStdString() ) foundDatabase = true; LogMsg(QString::number(i) + "|" + QString::fromStdString(databaseList[i])); } if( foundDatabase ){ LogMsg(" Database " + DatabaseName + " found."); influx->AddDataPoint("Rate,Bd=0,Ch=0 value=1"); influx->WriteData(DatabaseName.toStdString()); influx->ClearDataPointsBuffer(); if( influx->IsWriteOK() ){ LogMsg("test write database OK."); }else{ LogMsg("test write database FAIL."); } }else{ LogMsg(" Database " + DatabaseName + " NOT found."); delete influx; influx = NULL; } }else{ LogMsg(" InfluxDB URL ("+ DatabaseIP + ") is NOT Valid "); delete influx; influx = NULL; } }else{ LogMsg("No database is provided."); } } void MainWindow::CheckElog(){ WriteElog("Checking elog writing", "Testing communication", "checking"); if( elogID > 0 ){ LogMsg("Checked Elog writing. OK."); //TODO =========== chrome windowID AppendElog("Check Elog append.", chromeWindowID); if( elogID > 0 ){ LogMsg("Checked Elog Append. OK."); }else{ LogMsg("Checked Elog Append. FAIL. (no elog will be used.) "); } }else{ LogMsg("Checked Elog Write. FAIL. (no elog will be used.) (probably logbook " + expName + " does not exist) "); } } void MainWindow::SaveProgramSettings(){ IPListStr = lIPDomain->text(); DatabaseIP = lDatbaseIP->text(); DatabaseName = lDatbaseName->text(); ElogIP = lElogIP->text(); settingFilePath = lSaveSettingPath->text(); analysisPath = lAnalysisPath->text(); dataPath = lDataPath->text(); QFile file(settingFilePath + "/programSettings.txt"); file.open(QIODevice::Text | QIODevice::WriteOnly); file.write((settingFilePath+"\n").toStdString().c_str()); file.write((analysisPath+"\n").toStdString().c_str()); file.write((dataPath+"\n").toStdString().c_str()); file.write((IPListStr+"\n").toStdString().c_str()); file.write((DatabaseIP+"\n").toStdString().c_str()); file.write((DatabaseName+"\n").toStdString().c_str()); file.write((ElogIP+"\n").toStdString().c_str()); file.write("//------------end of file."); file.close(); LogMsg("Saved program settings to "+settingFilePath + "/programSettings.txt."); bnProgramSettings->setStyleSheet(""); bnNewExp->setEnabled(true); bnOpenDigitizers->setEnabled(true); DecodeIPList(); SetupInflux(); LoadExpSettings(); } //^###################################################################### Setup new exp void MainWindow::SetupNewExpPanel(){ LogMsg("Open New/Change/Reload Exp."); QDialog dialog(this); dialog.setWindowTitle("Setup / change Experiment"); dialog.setGeometry(0, 0, 500, 550); dialog.setWindowFlags(Qt::Dialog | Qt::WindowTitleHint | Qt::CustomizeWindowHint); QGridLayout * layout = new QGridLayout(&dialog); layout->setVerticalSpacing(5); unsigned short rowID = 0; //------- instruction QPlainTextEdit * instr = new QPlainTextEdit(&dialog); layout->addWidget(instr, rowID, 0, 1, 4); instr->setReadOnly(true); instr->setStyleSheet("background-color: #F3F3F3;"); instr->appendHtml("Setup new experiment will do following things:"); instr->appendHtml("0, Check the git repository in Analysis Path"); instr->appendHtml("1, Create folder in Data Path"); instr->appendHtml("2, Create Symbolic links in Analysis Path"); instr->appendHtml("3, Create expName.sh in Analysis Path "); instr->appendHtml("

"); instr->appendHtml("If Use Git is checked, \ the repository MUST be clean. \ It will then create a new branch with the New Exp Name \ or change to pre-exist branch."); instr->appendHtml("

"); instr->appendHtml("If there is no git repository in Analysis Path, \ it will create one with a branch name of New Exp Name ."); instr->appendHtml("

"); instr->appendHtml("expName.sh stores the exp name, runID, and elogID."); //------- Analysis Path rowID ++; QLabel * l1 = new QLabel("Analysis Path ", &dialog); l1->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(l1, rowID, 0); QLineEdit * le1 = new QLineEdit(analysisPath, &dialog); le1->setReadOnly(true); layout->addWidget(le1, rowID, 1, 1, 3); //------- Data Path rowID ++; QLabel * l2 = new QLabel("Data Path ", &dialog); l2->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(l2, rowID, 0); QLineEdit * le2 = new QLineEdit(dataPath, &dialog); le2->setReadOnly(true); layout->addWidget(le2, rowID, 1, 1, 3); //------- get harddisk space; rowID ++; //?QStorageInfo storage("/path/to/drive"); QStorageInfo storage = QStorageInfo::root(); qint64 availableSpace = storage.bytesAvailable(); QLabel * lbDiskSpace = new QLabel("Disk space avalible ", &dialog); lbDiskSpace->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(lbDiskSpace, rowID, 0); QLineEdit * leDiskSpace = new QLineEdit(QString::number(availableSpace/1024./1024./1024.) + " [GB]", &dialog); leDiskSpace->setReadOnly(true); layout->addWidget(leDiskSpace, rowID, 1, 1, 3); //*---------- get git branch isGitExist = false; QProcess git; git.setWorkingDirectory(analysisPath); //?git.setWorkingDirectory("/home/ryan/digios"); git.start("git", QStringList() << "branch" << "-a"); git.waitForFinished(); QByteArray output = git.readAllStandardOutput(); QStringList branches = (QString::fromLocal8Bit(output)).split("\n"); branches.removeAll(""); //qDebug() << branches; if( branches.size() == 0) { isGitExist = false; }else{ isGitExist = true; } QString presentBranch; unsigned short bID = 0; // id of the present branch for( unsigned short i = 0; i < branches.size(); i++){ if( branches[i].indexOf("*") != -1 ){ presentBranch = branches[i].remove("*").remove(" "); bID = i; break; } } //*----------- check git branch is clean for git exist bool isCleanGit = false; if( isGitExist ){ git.start("git", QStringList() << "status" << "--porcelain" << "--untracked-files=no"); git.waitForFinished(); output = git.readAllStandardOutput(); if( (QString::fromLocal8Bit(output)).isEmpty() ) isCleanGit = true; } //------- present git branch rowID ++; QLabel * l3 = new QLabel("Present Git Branches ", &dialog); l3->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(l3, rowID, 0); QLineEdit * le3 = new QLineEdit(presentBranch, &dialog); if( isGitExist == false ) { le3->setText("No git repository!!!"); le3->setStyleSheet("color: red;"); } le3->setReadOnly(true); layout->addWidget(le3, rowID, 1, 1, 3); //------- add a separator rowID ++; QFrame * line = new QFrame; line->setFrameShape(QFrame::HLine); line->setFrameShadow(QFrame::Sunken); layout->addWidget(line, rowID, 0, 1, 4); //------- use git checkbox rowID ++; QCheckBox * cbUseGit = new QCheckBox("Use Git", &dialog); cbUseGit->setChecked(true); useGit = true; layout->addWidget(cbUseGit, rowID, 1); connect(cbUseGit, &QCheckBox::clicked, this, [=](){this->useGit = cbUseGit->isChecked();}); //------- display git cleanness //?---- don't know why isGitExist && !isCleanGit does not work if( isGitExist ){ if ( !isCleanGit){ QLabel * lCleanGit = new QLabel("Git not CLEAN!!! Nothing can be done.", &dialog); lCleanGit->setStyleSheet("color: red;"); layout->addWidget(lCleanGit, rowID, 2, 1, 2); } } //------- show list of exisiting git repository rowID ++; QLabel * l4 = new QLabel("Existing Git Branches ", &dialog); l4->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(l4, rowID, 0); QComboBox * cb = new QComboBox(&dialog); layout->addWidget(cb, rowID, 1, 1, 2); QPushButton *bnChangeBranch = new QPushButton("Change", &dialog); layout->addWidget(bnChangeBranch, rowID, 3); connect(bnChangeBranch, &QPushButton::clicked, this, [=](){ this->ChangeExperiment(cb->currentText()); }); connect(bnChangeBranch, &QPushButton::clicked, &dialog, &QDialog::accept); if( isGitExist == false ){ cb->setEnabled(false); bnChangeBranch->setEnabled(false); }else{ for( int i = 0; i < branches.size(); i++){ if( i == bID ) continue; cb->addItem(branches[i].remove(" ")); } if ( branches.size() == 1) { cb->setEnabled(false); cb->addItem("no other branch"); bnChangeBranch->setEnabled(false); } } connect(cbUseGit, &QCheckBox::clicked, this, [=](){ if( branches.size() > 1 ) cb->setEnabled(cbUseGit->isChecked()); }); connect(cbUseGit, &QCheckBox::clicked, this, [=](){ if(branches.size() > 1 ) bnChangeBranch->setEnabled(cbUseGit->isChecked()); }); //------- type existing or new experiment rowID ++; QLabel * lNewExp = new QLabel("New Exp Name ", &dialog); lNewExp->setAlignment(Qt::AlignCenter | Qt::AlignRight); layout->addWidget(lNewExp, rowID, 0); QLineEdit * newExp = new QLineEdit("type and Enter", &dialog); layout->addWidget(newExp, rowID, 1, 1, 2); QPushButton *button1 = new QPushButton("Create", &dialog); layout->addWidget(button1, rowID, 3); button1->setEnabled(false); connect(newExp, &QLineEdit::textChanged, this, [=](){ newExp->setStyleSheet("color : green;");}); connect(newExp, &QLineEdit::returnPressed, this, [=](){ if( newExp->text() != "") { newExp->setStyleSheet(""); button1->setEnabled(true);}}); connect(button1, &QPushButton::clicked, this, [=](){ this->CreateNewExperiment(newExp->text());}); connect(button1, &QPushButton::clicked, &dialog, &QDialog::accept); //----- diable all possible actions //?---- don't know why isGitExist && !isCleanGit does not work if( isGitExist){ if ( !isCleanGit ){ cbUseGit->setEnabled(false); cb->setEnabled(false); bnChangeBranch->setEnabled(false); newExp->setEnabled(false); button1->setEnabled(false); } } //--------- cancel rowID ++; QPushButton *bnCancel = new QPushButton("Cancel", &dialog); layout->addWidget(bnCancel, rowID, 0, 1, 4); connect(bnCancel, &QPushButton::clicked, this, [=](){this->LogMsg("Cancel New/Change/Reload Exp");}); connect(bnCancel, &QPushButton::clicked, &dialog, &QDialog::reject); layout->setRowStretch(0, 1); for( int i = 1; i < rowID; i++) layout->setRowStretch(i, 2); LoadExpSettings(); dialog.exec(); } bool MainWindow::LoadExpSettings(){ //this method set the analysis setting ann symbloic link to raw data //ONLY load file, not check the git if( analysisPath == "") return false; QString settingFile = analysisPath + "/expName.sh"; LogMsg("Loading " + settingFile + " for Experiment."); QFile file(settingFile); if( !file.open(QIODevice::Text | QIODevice::ReadOnly) ) { LogMsg("" + settingFile + " not found."); LogMsg("Please Open the New/Change/Reload Exp"); bnNewExp->setStyleSheet("color: red;"); bnOpenDigitizers->setEnabled(false); leExpName->setText("no expName found."); return false; } QTextStream in(&file); QString line = in.readLine(); int count = 0; while( !line.isNull()){ int index = line.indexOf("="); QString haha = line.mid(index+1).remove(" ").remove("\""); //qDebug() << haha; switch (count){ case 0 : expName = haha; break; case 1 : rawDataFolder = haha; break; case 2 : runID = haha.toInt(); break; case 3 : elogID = haha.toInt(); break; } count ++; line = in.readLine(); } leRawDataPath->setText(rawDataFolder); leExpName->setText(expName); leRunID->setText(QString::number(runID)); bnOpenDigitizers->setStyleSheet("color:red;"); CheckElog(); return true; } void MainWindow::CreateNewExperiment(const QString newExpName){ LogMsg("Creating new Exp. : " + newExpName + ""); expName = newExpName; runID = -1; elogID = 0; CreateRawDataFolderAndLink(); WriteExpNameSh(); //@----- git must be clean //----- creat new git branch if( useGit ){ QProcess git; git.setWorkingDirectory(analysisPath); if( !isGitExist){ git.start("git", QStringList() << "init" << "-b" << newExpName); git.waitForFinished(); LogMsg("Initialzed a git repositiory with branch name " + newExpName + ""); }else{ git.start("git", QStringList() << "checkout" << "-b" << newExpName); git.waitForFinished(); LogMsg("Creat name branch : " + newExpName + ""); } } //----- create git branch if( useGit ){ QProcess git; git.setWorkingDirectory(analysisPath); git.start("git", QStringList() << "add" << "-A"); git.waitForFinished(); git.start("git", QStringList() << "commit" << "-m" << "initial commit."); git.waitForFinished(); LogMsg("Commit branch : " + newExpName + " as \"initial commit\""); } CheckElog(); leRawDataPath->setText(rawDataFolder); leExpName->setText(expName); leRunID->setText(QString::number(runID)); bnNewExp->setStyleSheet(""); bnOpenDigitizers->setEnabled(true); bnOpenDigitizers->setStyleSheet("color:red;"); } void MainWindow::ChangeExperiment(const QString newExpName){ //@---- git must exist. QProcess git; git.setWorkingDirectory(analysisPath); git.start("git", QStringList() << "checkout" << newExpName); git.waitForFinished(); LogMsg("Swicted to branch : " + newExpName + ""); expName = newExpName; CreateRawDataFolderAndLink(); LoadExpSettings(); } void MainWindow::WriteExpNameSh(){ //----- create the expName.sh QFile file2(analysisPath + "/expName.sh"); file2.open(QIODevice::Text | QIODevice::WriteOnly); file2.write(("expName="+ expName + "\n").toStdString().c_str()); file2.write(("rawDataPath="+ rawDataFolder + "\n").toStdString().c_str()); file2.write(("runID="+std::to_string(runID)+"\n").c_str()); file2.write(("elogID="+std::to_string(elogID)+"\n").c_str()); file2.write("//------------end of file."); file2.close(); LogMsg("Saved expName.sh to "+ analysisPath + "/expName.sh."); } void MainWindow::CreateRawDataFolderAndLink(){ //----- create data folder rawDataFolder = dataPath + "/" + expName; QDir dir; if( !dir.exists(rawDataFolder)){ if( dir.mkdir(rawDataFolder)){ LogMsg("" + rawDataFolder + " created." ); }else{ LogMsg("" + rawDataFolder + " cannot be created. Access right problem? " ); } }else{ LogMsg("" + rawDataFolder + " already exist." ); } //----- create analysis Folder QDir anaDir; if( !anaDir.exists(analysisPath)){ if( anaDir.mkdir(analysisPath)){ LogMsg("" + analysisPath + " created." ); }else{ LogMsg("" + analysisPath + " cannot be created. Access right problem?" ); } }else{ LogMsg("" + analysisPath + " already exist."); } //----- create symbloic link QString linkName = analysisPath + "/data_raw"; QFile file; if( file.exists(linkName)) { file.remove(linkName); } if (file.link(rawDataFolder, linkName)) { LogMsg("Symbolic link " + linkName +" -> " + rawDataFolder + " created."); } else { LogMsg("Symbolic link " + linkName +" -> " + rawDataFolder + " cannot be created. "); } } //^###################################################################### log msg void MainWindow::LogMsg(QString msg){ QString outputStr = QStringLiteral("[%1] %2").arg(QDateTime::currentDateTime().toString("MM.dd hh:mm:ss"), msg); if( logMsgHTMLMode ){ logInfo->appendHtml(outputStr); }else{ logInfo->appendPlainText(outputStr); } QScrollBar *v = logInfo->verticalScrollBar(); v->setValue(v->maximum()); //qDebug() << msg; logInfo->repaint(); } void MainWindow::WriteElog(QString htmlText, QString subject, QString category, int runNumber){ if( elogID < 0 ) return; if( expName == "" ) return; //TODO ===== Rethink the elog process, becasue the grafana screenshot most probably obtained from screenshot, unless there is an API for that //TODO ===== user name and pwd load from a file. QStringList arg; arg << "-h" << ElogIP << "-p" << "8080" << "-l" << expName << "-u" << "GeneralSOLARIS" << "solaris" << "-a" << "Author=\'General SOLARIS\'" ; if( runNumber > 0 ) arg << "-a" << "Run=" + QString::number(runNumber); if( category != "" ) arg << "-a" << "Category=" + category; arg << "-a" << "Subject=" + subject << "-n " << "2" << htmlText ; QProcess elogBash(this); elogBash.start("elog", arg); elogBash.waitForFinished(); QString output = QString::fromUtf8(elogBash.readAllStandardOutput()); int index = output.indexOf("ID="); if( index != -1 ){ elogID = output.mid(index+3).toInt(); }else{ elogID = -1; } } void MainWindow::AppendElog(QString appendHtmlText, int screenID){ if( elogID < 1 ) return; if( expName == "" ) return; QProcess elogBash(this); QStringList arg; arg << "-h" << ElogIP << "-p" << "8080" << "-l" << expName << "-u" << "GeneralSOLARIS" << "solaris" << "-w" << QString::number(elogID); //retrevie the elog elogBash.start("elog", arg); elogBash.waitForFinished(); QString output = QString::fromUtf8(elogBash.readAllStandardOutput()); //qDebug() << output; QString separator = "========================================"; int index = output.indexOf(separator); if( index != -1){ QString originalHtml = output.mid(index + separator.length()); arg.clear(); arg << "-h" << ElogIP << "-p" << "8080" << "-l" << expName << "-u" << "GeneralSOLARIS" << "solaris" << "-e" << QString::number(elogID) << "-n" << "2" << originalHtml + "
" + appendHtmlText; if( screenID >= 0) { //TODO =========== chrome windowID QScreen * screen = QGuiApplication::primaryScreen(); if( screen){ QPixmap screenshot = screen->grabWindow(screenID); screenshot.save("screenshot.png"); arg << "-f" << "screenshot.png"; } } elogBash.start("elog", arg); elogBash.waitForFinished(); output = QString::fromUtf8(elogBash.readAllStandardOutput()); index = output.indexOf("ID="); if( index != -1 ){ elogID = output.mid(index+3).toInt(); }else{ elogID = -1; } }else{ elogID = -1; } }