Hardware/Cable Changes for Switching Target Rooms: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

11 April 2022

  • curprev 16:0016:00, 11 April 2022‎ Rtang talk contribs‎ 4,568 bytes +4,568‎ Created page with "= From the Tandem Target Room to the LINAC Target Room = '''Ensure all appropriate supplies are off!''' # The Slit Stabilization Amplifier is shared between the Tandem and LINAC 90◦ magnets. Unplug the 110 volt power cord and disconnect the output signal cable D-type connector from the amplifier and terminate it at the LINAC Slits Connector Box. Detach the two coax cables from the image slits and move the amplifier to the LINAC 90◦ magnet image slits. Connect the..."
Retrieved from "https://fsunuc.physics.fsu.edu/wiki/index.php/Hardware/Cable_Changes_for_Switching_Target_Rooms"