Raspberry Pi Camera

Picture of the raspberry pi and the night vision camera with IR leds

a Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB) is used to mount the camera. The camera model is Arducam Lens Board OV5647.

To access the web interface http://pi01.physics.fsu.edu/html/

Notice :

When in Target Room 2, it has wifi connection to 192.168.3.17

login information

Also, the VNC server is enabled on the raspberry pi.

Warning :

Please shutdown properly before take out the power

Cam module

• Lens Board OV5647 Sensor for Raspberry Pi Camera, Arducam Adjustable and Interchangeable Lens M12 Module, Focus and Angle Enhancement for Raspberry Pi 4/3/3 B+
• Arducam Noir Camera for Raspberry Pi, Interchangeable CS Mount Lens LS-2717CS, OV5647 5MP 1080P

Lens

• Arducam CS-Mount Lens for Raspberry Pi HQ Camera, 16mm Focal Length with Manual Focus and Adjustable Aperture

web interface

installation

https://elinux.org/RPi-Cam-Web-Interface

once installed, the web interface will autostart at the start-up.

connect port = 80

Setup the raspberry pie

Get the raspberry pie image https://www.raspberrypi.com/software/

in Ubunutu

sudo apt install rpi-imager

In the imager, don't forget to set the ssh id and password.

after that, insert the SD card into the PC.

IP

128.186.111.100

nickname: pi01 (not username)

Spare raspberry pi

We have a raspberry pi 5 B for spare, IP = 103, name pi02