ANASEN: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→SNMP) |
||
| Line 13: | Line 13: | ||
to control the Mpod-C via USB (say, setting up the IP), in Windows, install the MUSEController. | to control the Mpod-C via USB (say, setting up the IP), in Windows, install the MUSEController. | ||
== SNMP == | |||
in linux, install snmp | in linux, install snmp | ||
| Line 21: | Line 21: | ||
copy the [[:File:WIENER-CRATE-MIB.txt|WIENER-CRATE-MIB.txt]] into /usr/share/snmp/mibs/ | copy the [[:File:WIENER-CRATE-MIB.txt|WIENER-CRATE-MIB.txt]] into /usr/share/snmp/mibs/ | ||
=== example syntax === | |||
~>snmpget -v 2c -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputMeasurementSenseVoltage.u1 | ~>snmpget -v 2c -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputMeasurementSenseVoltage.u1 | ||
WIENER-CRATE-MIB::outputMeasurementSenseVoltage.u1 = Opaque: Float: 0.000000 V | WIENER-CRATE-MIB::outputMeasurementSenseVoltage.u1 = Opaque: Float: 0.000000 V | ||
Revision as of 17:49, 11 July 2022
HV supply
IP
128.186.111.101
Iseg HV with Wiener Mpod
The Iseg HV modules are using Mpod crate. A Mpod-C (controller) is used to control the HV module.
The Mpod-C can be controlled via ethernet, USB, or CAN. For the ethernet, it requires an IP.
to control the Mpod-C via USB (say, setting up the IP), in Windows, install the MUSEController.
SNMP
in linux, install snmp
sudo apt install snmp
copy the WIENER-CRATE-MIB.txt into /usr/share/snmp/mibs/
example syntax
~>snmpget -v 2c -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputMeasurementSenseVoltage.u1 WIENER-CRATE-MIB::outputMeasurementSenseVoltage.u1 = Opaque: Float: 0.000000 V
~>snmpset -v 2c -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputVoltage.u0 F 0.0 WIENER-CRATE-MIB::outputVoltage.u0 = Opaque: Float: 0.000000 V