ANASEN: Difference between revisions
Jump to navigation
Jump to search
| Line 34: | Line 34: | ||
WIENER-CRATE-MIB::outputVoltage.u0 = Opaque: Float: 0.000000000000 V | WIENER-CRATE-MIB::outputVoltage.u0 = Opaque: Float: 0.000000000000 V | ||
More detail can be found in [:File:Iseg SNMP Programmers Guide.pdf here]. | More detail can be found in [[:File:Iseg SNMP Programmers Guide.pdf | here]]. | ||
. | . | ||
Revision as of 19:44, 14 July 2022
HV supply
The Iseg HV modules are using Mpod crate. A Mpod-C (controller) is used to control the HV module.
The Mpod-C can be controlled via ethernet, USB, or CAN. For the ethernet, it requires an IP.
GUI control and monitor
https://fsunuc.physics.fsu.edu/git/rtang/IsegSNMPGUI
The GUI also push monitor values to database and display on Grafana https://fsunuc.physics.fsu.edu/grafana/d/JG7ADC67z/iseg-hv-monitor?orgId=1&refresh=5s
IP
128.186.111.101
Iseg HV with Wiener Mpod
to control the Mpod-C via USB (say, setting up the IP), in Windows, install the MUSEController.
SNMP
in linux, install snmp
sudo apt install snmp
copy the WIENER-CRATE-MIB.txt into /usr/share/snmp/mibs/
example syntax
~>snmpget -v 2c -Op .12 -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputMeasurementSenseVoltage.u1 WIENER-CRATE-MIB::outputMeasurementSenseVoltage.u1 = Opaque: Float: 0.000000000000 V
~>snmpset -v 2c -Op .12 -m +WIENER-CRATE-MIB -c guru 128.186.111.101 outputVoltage.u0 F 0.0 WIENER-CRATE-MIB::outputVoltage.u0 = Opaque: Float: 0.000000000000 V
More detail can be found in here. .