CATRiNA

CATRiNA at Gamma Station beamline

Introduction

The Compound Array for Transfer Reactions in Nuclear Astrophysics (CATRiNA) is a neutron detector array located at Florida State University. CATRiNA is composed of 32 deuterated-benzene (${\textrm {C}}_{6}{\textrm {D}}_{6}$) liquid scintillators. The array consists of 16 "small" detectors which has 2" x 2" aluminum cell each and 16 "large" detectors that has a 4" x 2" aluminum cell each. Due to the anisotropic light-output spectrum of of neutron-deuterium scattering, the light-output can be converted to the neutron energy without time-of-flight information in a process known as spectrum unfolding . Please refer [| here] for setting up the HV source for CATRiNA.

Light-Output Response

From page 570-571 of Radiation Detection and Measurement by Knoll, the recoil neutron energy is given as a function of the target recoil angle in the lab frame Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle \theta } , incident neutron energy Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle E_n } , and nucleon number of target nucleus Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle A }

Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle E_{recoil} = \frac{4A}{(1+A)^2}cos^2\theta E_n }

For maximum energy transfer, Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle \theta = 0 } , and

Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle E_{recoil} = \frac{4A}{(1+A)^2} E_n }

For deuterium, Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle A = 2 } which implies a maximum deposited neutron energy of Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle E_{recoil}/E_n = \frac{8}{9} } .

From previous work, the light-output response of a given CATRiNA detector can be parameterized as a function of incident neutron energy and experimentally-extracted parameters:

Failed to parse (SVG with PNG fallback (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "https://wikimedia.org/api/rest_v1/":): {\displaystyle LO = aE_{dep}-b(1-e^{-cE_{dep}}) }

The light output parameters are given by the following table

Size	a	b	c
2" x 2"	0.6193	2.036	0.2592
4" x 2"	0.6109	1.946	0.2625

PMT Bias

The CATRiNA Photo-Multiplier Tubes (PMTs) require bias to function. Below is a table of optimized biases for the PMTs.

Size	a
2" x 2"	0.6193
4" x 2"	0.6109

Digitizer setup for coincident with RF

CATRiNA cable connection

Digitizer 1 is the master, and received the RF-coin signal. Digitizer 2 and 3 are the slaves, connected to the neutron detectors

The TRG-OUT of digi-2 and -3 will be "on" when ever any channel is fired. To do so, the Local Shaped Trigs [G] must be OR.

also, the TRG-OUT Mode is Trigger (Mask) and the TRG-OUT Mask buttons are green for all channels.

Time sync

Digitizer 1 is SW controll and internal clock. The TRG-OUT mode is "RUN".

Digitizer 2 and 3 are S-IN and external clock.

Contact

Sergio Almaraz-Calderon mailto:salmarazcalderon@fsu.edu