Clarion2

From FSU Fox's Lab Wiki
Jump to navigation Jump to search

Introduction

Clarion2 is the successor of Clarion. It is a 4π gamma ray detectors array.

HPGe Clover Detector

Trinity

Trinity is GAGG (stand for ?) detector array.

DAQ

LN2 cooling system

The liquid Nitrogen (LN2) filling system developed by Mitch Allmond (Oak Ridge) is hosted on the DAQ computer under account "ln@ln02".

ln@ln02 Directory

Several important directories for using the LN2 system are listed below.

/gln

/gln is the most important directory, it is where the control program is located and for most problems is where you will need to go

gln_ui

gln_ui is the user interface to issue commands to the fill program

gln_ui Commands

fill <det-list>
fill detectors <det-list> now
fill <det-list> after <number-of-minutes> (or <hours:
minutes>)
wait to fill detectors <det-list> by time <hours:minutes>
cool <det-list>
cool down detectors
ton <det-list>
turn on (enable fill for) detectors
tof <det-list>
turn off (disable fill for) detectors
con det#[.temp#]
turn on checking of detector temps
cof det#[.temp#]
turn off checking of detector temps
abort
abort and disable all fills

load [fig-file-name] - load configuration from fig-file-name (default = gln.fig) exit-master - exit gln_master process clr - clear all errors for entire system clrd <det-list> - clear errors for specific detectors clrs - clear all slot errors clrm - clear all manifold errors


d - display status dt - display times of all detectors & manifolds (formatted dates and times) dts - display times of all detectors & manifolds (in seconds) dc - display configuration (valve and ADC IDs, etc) mon - enter monitor mode; type control-C to exit quit - exit gln_ui process hvln - useless command for backward compatibility clear - clear screen ? or help - this output


extra low-level debugging commands:

radc <#> - read ADC number <#> opv <#>, clv <#> - open and close valves (TAKE CARE!)


http://clarion02.physics.fsu.edu/~clarion02/index.html