ANASEN

Array for Nuclear Astrophysics and Structure with Exotic Nuclei (ANASEN) is an active target detector. FSU, LSU, and TAM are joined in the development of the project.

First Generation

NIM paper : https://doi.org/10.1016/j.nima.2017.07.030 PRC paper : https://doi.org/10.1103/PhysRevC.105.055806

Second Generation

Section of ANASEN with twisted wire configuration

A simulation, showed the Anode wires, the Cathode wites, the SuperX3 Silicon Detector, and QQQ Silicon Detector. The simulation shows Anode-9 and Cathode-15 are hit.

The main difference from the 1st generation is the Twisted Anode and Cathode wires.

Basics Geometry

There are 5 Layers on the radial position of the ANASEN.

Structure	Radius [mm]
ionizing wires	23
Graurd wires	33
Anode wires	38
Cathode wires	43
SuperX3 Silicon	88

SuperX3 Silicon Detector Array

A drawing of SuperX3 silicon detector

There are 24 Super-X3 double-sided Silicon detectors on the wall of the ANASEN. They are placed 88 mm away from the beam axis. Each of them has 75 mm X 40 mm sensitive area. Thus, the super-X3 covers a forward and backward angle of 40 deg.