mirror of
https://github.com/gwm17/Mask.git
synced 2024-11-22 18:28:51 -05:00
58 lines
4.7 KiB
Markdown
58 lines
4.7 KiB
Markdown
# MASK: Monte cArlo Simulation of Kinematics
|
|
MASK is a Monte Carlo simulation of reaction kinematics for use detector systems at Florida State University.
|
|
MASK is capable of simulating multi-step kinematic reaction-decay sequences, storing data in a lightweight binary format, after which the kinematic data can be fed to a detector geometry for efficiency testing. Currently geometries for ANASEN and SABRE are included in the code. Mask depends on the CERN ROOT analysis framework. All data is stored in the ROOT format using a custom dictionary.
|
|
|
|
## Building MASK
|
|
To clone MASK and all submodules use `git clone --recursive https://github.com/gwm17/Kinematics.git`.
|
|
Mask is built using the CMake build tool. On most systems this can be done using the following commands inside the Mask repository:
|
|
|
|
- `mkdir build`
|
|
- `cd build`
|
|
- `cmake ..`
|
|
- `make`
|
|
|
|
By default Mask builds for release. To build for debug replace `cmake ..` with `cmake -DCMAKE_BUILD_TYPE=Debug ..`. Mask uses CMake to find the installed ROOT libraries and headers.
|
|
|
|
## Using the kinematics simulation
|
|
By default MASK is capable of simulating reactions of up to three steps. Here is a brief outline of each type:
|
|
|
|
0. A pure decay involves a "target" decaying into an ejectile and residual. It is assumed isotropic by default; any other case will require the modification of the code.
|
|
1. A single step reaction involves a target being hit by a projectile and emitting an ejectile and a residual. It can incorporate all of the input file sampling parameters.
|
|
2. A two step reaction is a single step reaction where the residual subsequently decays into two daughters (called breakups). Again, all sampling is allowed.
|
|
3. A three step reaction is a two step reaction where one of the breakup particles subsequently decays into two more breakup particles. Again, all sampling is allowed
|
|
|
|
For decays, a specific angular distribution can be given as input as a text file with values of coefficiencts of a Legendre polynomial series. Examples can be found in the `./etc` directory, including an isotropic case. It is assumed that the decays in the center-of-mass frame are isotropic in phi (i.e. m=0). Decay1 corresponds to the first decay, if there are multiple steps, Decay2 to the second. If there are no decays, these parameters are not used (or if only one decay, Decay2_AngularMomentum is not used).
|
|
|
|
The input file requires that the user include target information, which will be used to calculate energy loss for all of the reactants and reaction products. The target can contain layers, and each layer can be composed of a compound of elements with a given stoichiometry. If the user wishes to not include energy loss in the kinematics, simply give all target layers a thickness of 0. Note that more layers and more thickness = more time spent calculating energy loss. These energy loss methods are only applicable for solid targets, and should not be applied to gas or liquid targets. Energy loss calculations have a stated uncertainty of approximately five percent. The energy loss library used is called `catima` and can be found [here](https://github.com/gwm17/catima).
|
|
|
|
To run MASK simply do the following from the MASK repository:
|
|
|
|
`./bin/MaskApp input.txt`
|
|
|
|
Input.txt can be replaced by any text file with the correct format.
|
|
|
|
## Using the detector geometry simulation
|
|
Detector geometry is encoded using ROOT math libraries in the `src/Detectors` folder. Two different detector geometries are already present: SPS-SABRE and ANASEN. To add a new geometry, follow the guidelines outlined by each of these cases.
|
|
|
|
To choose which detector scheme is run, modify the main function in `src/Detectors/main.cpp`. The included geometries also have options to do an internal geometry consistency check and print out coordinates for drawing the detector arrays, which can be useful for testing.
|
|
|
|
|
|
|
|
To run DetEff use the format
|
|
|
|
`./bin/DetEff <kinematics_datafile> <new_detection_datafile> <new_detection_statsfile>`
|
|
|
|
where the detection datafile contains all of the kinematics data as well as information about which particles are detected (this is in the mask file format) and the statsfile is a text file containing efficiency statistics.
|
|
|
|
## Data visualization
|
|
All data is saved as ROOT trees of std::vectors of Mask::Nucleus classes. To enable this, a ROOT dictionary is generated and linked into a shared library found in the `lib` directory of the repository. This allows the user to link to the shared library for accessing and analyzing the data generated by MASK.
|
|
|
|
Mask also provides a default visualization tool called RootPlot. RootPlot is run as
|
|
|
|
`./bin/RootPlot <datafile> <outputfile>`
|
|
|
|
where the datafile can be either the datafile from Mask or the datafile from DetEff.s
|
|
|
|
## Requirements
|
|
- Requires CMake > 3.16
|
|
- Requires ROOT > 6.16 |