can plot trace at FSUDAQ

ClassDigitizer.cpp

@@ -334,7 +334,7 @@ void Digitizer::ReadData(){
   
   ret = CAEN_DGTZ_ReadData(handle, CAEN_DGTZ_SLAVE_TERMINATED_READOUT_MBLT, data->buffer, &(data->nByte));
   uint32_t EventSize = ReadRegister(Register::DPP::EventSize); // Is it as same as data->nByte?
-  //printf("Read Buffer size %d byte, Event Size : %d byte \n", data->nByte, EventSize);
+  printf("Read Buffer size %d byte, Event Size : %d byte \n", data->nByte, EventSize);
   
   if (ret || data->nByte == 0) {
     ErrorMsg(__func__);
@@ -582,8 +582,8 @@ int Digitizer::ProgramPHABoard(){
   ret = CAEN_DGTZ_Reset(handle);
   printf("======== program board PHA\n");
 
-  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::RecordLength_G + 0x7000, 625);  
-  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::BoardConfiguration, 0x4E8115);  
+  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::RecordLength_G + 0x7000, 250);  
+  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::BoardConfiguration, 0x84F8115);  
   
   //TODO change to write register
   ret = CAEN_DGTZ_SetAcquisitionMode(handle, CAEN_DGTZ_SW_CONTROLLED); /// software command

FSUDAQ.cpp

@@ -114,10 +114,11 @@ MainWindow::MainWindow(const TGWindow *p,UInt_t w,UInt_t h) {
   fMain->AddFrame(fEcanvas, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,10));
   ///================= Log massage
   TGGroupFrame * groupLog = new TGGroupFrame(fMain, "Log Message", kHorizontalFrame);
-  fMain->AddFrame(groupLog, new  TGLayoutHints(kLHintsCenterX, 5,5,0,5) );
+  fMain->AddFrame(groupLog, new TGLayoutHints(kLHintsExpandX, 10,10,10,10) );
   
-  teLog = new TGTextEdit(groupLog, w, 100);
-  groupLog->AddFrame(teLog,  new TGLayoutHints(kLHintsNormal, 0,0,10,0));
+  teLog = new TGTextEdit(groupLog, w, 100);  groupLog->AddFrame(teLog, new TGLayoutHints(kLHintsExpandX, 2,2,10,0) );
+
+
   /// Set a name to the main frame
   fMain->SetWindowName("FSU DAQ");
   /// Map all subwindows of main frame
@@ -146,6 +147,12 @@ MainWindow::MainWindow(const TGWindow *p,UInt_t w,UInt_t h) {
   //HandleMenu(M_CH_SETTING_PHA);
   //HandleMenu(M_CH_SETTING_PSD);
   
+  gAnaTrace1 = NULL;
+  gAnaTrace2 = NULL;
+  gDigiTrace1 = NULL;
+  gDigiTrace2 = NULL;
+
+  
 }
 MainWindow::~MainWindow() {
   delete fMenuBar;
@@ -168,8 +175,12 @@ MainWindow::~MainWindow() {
   //
   //delete saveDataThread;
   //delete fillHistThread;
-  //
-  //delete gTrace;
+  
+  delete gAnaTrace1;
+  delete gAnaTrace2;
+  delete gDigiTrace1;
+  delete gDigiTrace2;
+  
   
   /// Clean up used widgets: frames, buttons, layout hints
   fMain->Cleanup();
@@ -367,6 +378,59 @@ void MainWindow::LogMsg(char * msg){
 void MainWindow::PlotTrace(){
   printf("=== %s\n", __func__); 
   
+  Data * data = digi[0]->GetData();
+  data->AllocateMemory();
+  data->DPPType = digi[0]->GetDPPType();
+  
+  int ch2ns = (int) digi[0]->GetCh2ns();
+  
+  digi[0]->StartACQ();
+  
+  int count = 0;
+  
+  while(count < 10){
+    //sleep(1);
+    usleep(500*1000); /// wait half sec
+    digi[0]->ReadData();
+   
+    if( data->nByte > 0 ){
+      data->DecodeBuffer(1);
+      
+      data->PrintStat();
+      
+      delete gAnaTrace1; gAnaTrace1 = new TGraph();
+      delete gDigiTrace1; gDigiTrace1 = new TGraph();
+      
+      int traceLength = (data->Waveform1[0][0]).size();
+      
+      printf("0----------%d \n", traceLength);
+      
+      if( traceLength == 0 ) {
+        LogMsg("no trace");
+      }else{
+        for( int i = 0; i < traceLength ; i++) {
+          //printf("%d, ", (data->Waveform1[0][0])[i]);
+          gAnaTrace1->SetPoint(i, i*ch2ns, (data->Waveform1[0][0])[i]);
+          gDigiTrace1->SetPoint(i, i*ch2ns, 2000*(data->DigiWaveform1[0][0])[i] + 2000);
+          
+        }
+      }
+      data->ClearData();
+      
+      fEcanvas->GetCanvas()->cd();
+      gAnaTrace1->Draw("APL");
+      gDigiTrace1->Draw("L");
+      fEcanvas->GetCanvas()->Update();      
+      break;
+    
+    }
+    
+    count++;
+    
+  };
+  digi[0]->StopACQ();
+  if( count == 10 ) LogMsg("Plot Trace TimeOut, please check setting");
+
 }
 
 //############################################

FSUDAQ.h

@@ -69,8 +69,11 @@ private:
    //static TH1F * hEnergy[MAXMOD][MAXCH];
    //static TH1F * hChannel[MAXMOD];
    //static bool isEnergyHistFilled;
-   //TGraph * gTrace;
-   //
+   
+   TGraph * gAnaTrace1; /// analogy trace 1
+   TGraph * gAnaTrace2; /// analogy trace 2
+   TGraph * gDigiTrace1; /// digital trace 1
+   TGraph * gDigiTrace2; /// digital trace 1
    //TGTextEditor * configEditor;
    
   

boardSetting.cpp

@@ -917,7 +917,7 @@ void BoardSetting::ChangeBoard(){
     cbDP1->AddEntry("Armed (Triggered)", 1);
     cbDP1->AddEntry("Peak Run", 2);
     cbDP1->AddEntry("Pile-Up", 3);
-    cbDP1->AddEntry("Peaking", 4);
+    ///cbDP1->AddEntry("Peaking", 4); Duplicated?
     cbDP1->AddEntry("TRG Validation Win.", 5);
     cbDP1->AddEntry("Baseline freeze", 6);
     cbDP1->AddEntry("TRG holdoff", 7);
@@ -1080,7 +1080,7 @@ void BoardSetting::SetBoardConfiguration(){
   uint32_t bit = (3 << 18); /// timestamp and energy recording
   if( digi[boardID]->GetDPPType() == V1730_DPP_PHA_CODE ) {
     
-    bit += (18 << 3) ; /// Reserved must be 0010010 for bit[10:3]
+    bit += (34 << 3) ; /// Reserved must be 0010010 for bit[10:3]
     if( bAutoDataFlush->GetState() == kButtonDown ) { bit += 1;};
     if( bDecimateWF->GetState() == kButtonDown ) bit += (1 << 1);
     if( bWFRecord->GetState() == kButtonDown ) bit += ( 1 << 16);