176 lines
16 KiB
C++
176 lines
16 KiB
C++
#include "DigitizerPHA.h"
|
||
|
||
DigitizerPHA::DigitizerPHA(){
|
||
|
||
}
|
||
|
||
DigitizerPHA::DigitizerPHA(int boardID, int portID){
|
||
OpenDigitizer(boardID, portID);
|
||
}
|
||
|
||
DigitizerPHA::~DigitizerPHA(){
|
||
|
||
}
|
||
|
||
int DigitizerPHA::ProgramBoard(){
|
||
Digitizer::ProgramBoard();
|
||
/// Set trigger propagation
|
||
/// Set analog probe 1 to input
|
||
/// Set analog probe 2 to Tranpedoiz - Baseline
|
||
/// disable waveform recording
|
||
/// enable extrac 2 word
|
||
/// record time stamp
|
||
/// record energy
|
||
/// digitial virtual probe 1 = Peaking
|
||
/// digitial virtual probe 2 = trigger
|
||
ret |= CAEN_DGTZ_WriteRegister(handle, Register::BoardConfiguration , 0x000E8114); /// Channel Control Reg (indiv trg, seq readout) ??
|
||
ErrorMsg("PHA-ProgramBoard");
|
||
return ret;
|
||
}
|
||
|
||
void DigitizerPHA::SetAnalogProbe1(unsigned int bit) { SetBits(Register::BoardConfiguration, bit, 2, 12); ErrorMsg("PHA-SetAnalogProbe1"); }
|
||
void DigitizerPHA::SetAnalogProbe2(unsigned int bit) { SetBits(Register::BoardConfiguration, bit, 2, 14); ErrorMsg("PHA-SetAnalogProbe1"); }
|
||
void DigitizerPHA::SetWaveFormRecording(bool OnOff) { SetBits(Register::BoardConfiguration, OnOff, 1, 16); ErrorMsg("PHA-SetWaveFormRecording"); }
|
||
void DigitizerPHA::SetExtra2WordOutput(bool OnOff) { SetBits(Register::BoardConfiguration, OnOff, 1, 17); ErrorMsg("PHA-SetExtra2WordOutput");}
|
||
void DigitizerPHA::SetTimeStampRecording(bool OnOff) { SetBits(Register::BoardConfiguration, OnOff, 1, 18); ErrorMsg("PHA-SetTimeStampRecording"); }
|
||
void DigitizerPHA::SetEnergyRecording(bool OnOff) { SetBits(Register::BoardConfiguration, OnOff, 1, 19); ErrorMsg("PHA-SetEnergyRecording");}
|
||
void DigitizerPHA::SetVirtualProbe1(unsigned int bit){ SetBits(Register::BoardConfiguration, bit, 4, 20); ErrorMsg("PHA-SetVirtualProbe1"); }
|
||
|
||
void DigitizerPHA::SetTrapezoidRescaling(unsigned int rightShiftBits, int ch ){ SetBits(Register::DPP::DPPAlgorithmControl, rightShiftBits, 5, 0, ch); ErrorMsg("SetTrapezoidRescaling"); }
|
||
void DigitizerPHA::SetPeakSampling(unsigned int bit, int ch) { SetBits(Register::DPP::DPPAlgorithmControl, bit, 2, 12, ch); ErrorMsg("SetPeakSampling");}
|
||
void DigitizerPHA::SetPulsePolarity(bool PositiveIsZero, int ch) { SetBits(Register::DPP::DPPAlgorithmControl, PositiveIsZero, 1, 16, ch); ErrorMsg("SetPulsePolarity");}
|
||
void DigitizerPHA::SetBaselineSampling(unsigned int bit, int ch) { SetBits(Register::DPP::DPPAlgorithmControl, bit, 3, 20, ch); ErrorMsg("SetBaselineSampling"); }
|
||
void DigitizerPHA::SetRollOverFlag(bool isRollOver, int ch) { SetBits(Register::DPP::DPPAlgorithmControl, isRollOver, 1, 26, ch); ErrorMsg("SetRollOverFlag");}
|
||
void DigitizerPHA::SetPileUpFlag(bool isPileUpFlag, int ch) { SetBits(Register::DPP::DPPAlgorithmControl, isPileUpFlag, 1, 27, ch); ErrorMsg("SetPileUpFlag");}
|
||
|
||
void DigitizerPHA::SetExtra2WordOption(unsigned int bit, int ch) { SetBits(Register::DPP::PHA::DPPAlgorithmControl2_G, bit, 3, 8, ch); ErrorMsg("PHA-SetExtra2WordOption");}
|
||
|
||
void DigitizerPHA::SetTriggerThreshold(unsigned int threshold, int ch ) { WriteRegister(Register::DPP::PHA::TriggerThreshold, threshold & 0x03FF, ch); ErrorMsg("PHA-SetTriggerThreshold");}
|
||
void DigitizerPHA::SetTriggerHoldOff(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::TriggerHoldOffWidth, nSample & 0x03FF, ch); ErrorMsg("PHA-SetTriggerHoldOff"); }
|
||
void DigitizerPHA::SetTriggerSmoothingFactor(unsigned int bit, int ch ) { WriteRegister(Register::DPP::PHA::RCCR2SmoothingFactor, bit & 0x001F, ch); ErrorMsg("PHA-SetTriggerSmoothingFactor");}
|
||
void DigitizerPHA::SetTriggerOutputWidth(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::ShapedTriggerWidth, nSample & 0x03FF, ch); ErrorMsg("PHA-SetTriggerOutputWidth");}
|
||
void DigitizerPHA::SetInputRiseTime(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::InputRiseTime, nSample & 0x00FF, ch); ErrorMsg("PHA-SetInputRiseTime");}
|
||
void DigitizerPHA::SetTrapezoidRiseTime(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::TrapezoidRiseTime, nSample & 0x0FFF, ch); ErrorMsg("PHA-SetTrapezoidRiseTime");}
|
||
void DigitizerPHA::SetTrapezoidFlatTop(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::TrapezoidFlatTop, nSample & 0x0FFF, ch); ErrorMsg("PHA-SetTrapezoidFlatTop");}
|
||
void DigitizerPHA::SetDecayTime(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::DecayTime, nSample & 0xFFFF, ch); ErrorMsg("PHA-SetDecayTime");}
|
||
void DigitizerPHA::SetPeakingTime(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::PeakingTime, nSample & 0x0FFF, ch); ErrorMsg("PHA-SetPeakingTime");}
|
||
void DigitizerPHA::SetPeakingHoldOff(unsigned int nSample, int ch ) { WriteRegister(Register::DPP::PHA::PeakHoldOff, nSample & 0x03FF, ch); ErrorMsg("PHA-SetPeakingHoldOff");}
|
||
void DigitizerPHA::SetEnergyFineGain(unsigned int gain, int ch ) { WriteRegister(Register::DPP::PHA::FineGain, gain & 0xFFFF, ch); ErrorMsg("PHA-SetEnergyFineGain");}
|
||
void DigitizerPHA::SetRiseTimeValidWindow(unsigned int nSample, int ch ){ WriteRegister(Register::DPP::PHA::RiseTimeValidationWindow,nSample & 0x03FF, ch); ErrorMsg("PHA-SetRiseTimeValidWindow");}
|
||
|
||
|
||
void DigitizerPHA::PrintBoardConfiguration(){
|
||
if( !isConnected ) return;
|
||
uint32_t * value = new uint32_t[1];
|
||
CAEN_DGTZ_ReadRegister(handle, (uint32_t) Register::BoardConfiguration, value);
|
||
printf(" 32 28 24 20 16 12 8 4 0\n");
|
||
printf(" | | | | | | | | |\n");
|
||
cout <<" Board Configuration : 0b" << bitset<32>(value[0]) << endl;
|
||
printf(" Bit[ 0] = Auto Data Flush \n");
|
||
printf(" Bit[ 1] = Save decimated waveform \n");
|
||
printf(" Bit[ 2] = Trigger propagation \n");
|
||
printf(" Bit[ 3:10] = must be 001 0001 0 \n");
|
||
printf(" Bit[ 11] = Dual Trace \n");
|
||
printf(" Bit[12:13] = Analog probe 1 : 00 = input, 01 = RC-CR (1st derivative), 10 = RC-CR2 (2nd derivative), 11 = Trapezoid.\n");
|
||
printf(" Bit[14:15] = Analog probe 2 : 00 = input, 01 = Threshold, 10 = Trapezoid - Baseline, 11 = baseline.\n");
|
||
printf(" Bit[ 16] = WaveForm Recording \n");
|
||
printf(" Bit[ 17] = Extras 2 word enable \n");
|
||
printf(" Bit[ 18] = Record Time Stamp \n");
|
||
printf(" Bit[ 19] = Record Energy \n");
|
||
printf(" Bit[20:23] = Digital Virtual probe 1 : \n");
|
||
printf(" 0000: Peaking, shows where the energy is calculated; \n");
|
||
printf(" 0001: ”Armed”, digital input showing where the RC‐CR2 crosses the Threshold\n");
|
||
printf(" 0010: ”Peak Run”, starts with the trigger and last for the whole event\n");
|
||
printf(" 0011: ”Pile‐up”, shows where a pile‐up event occurred\n");
|
||
printf(" 0100: ”Peaking”, shows where the energy is calculated\n");
|
||
printf(" 0101: ”TRG Validation Win”, digital input showing the trigger validation acceptance window TVAW\n");
|
||
printf(" 0110: ”Baseline freeze”, shows where the algorithm stops calculating the baseline and its value is frozen\n");
|
||
printf(" 0111: ”TRG Holdoff”, shows the trigger hold‐off parameter\n");
|
||
printf(" 1000: ”TRG Validation”, shows the trigger validation signal TRG_VAL \n");
|
||
printf(" 1001: ”Acq Busy”, this is 1 when the board is busy (saturated input signal or full memory board) or there is a veto\n");
|
||
printf(" 1010: ”Zero Cross. Win.”, shows the RT Discrimination Width\n");
|
||
printf(" 1011: ”Ext TRG”, shows the external trigger, when available\n");
|
||
printf(" 1100: ”Busy”, shows when the memory board is full.\n");
|
||
printf(" Bit[26:28] = Digital Virtual probe 2 : \n");
|
||
printf(" 000: Trigger\n");
|
||
printf(" other: Reserved\n");
|
||
printf("====================================== \n");
|
||
}
|
||
|
||
void DigitizerPHA::GetChannelSettingFromDigitizer(int ch){
|
||
if( !isConnected ) return;
|
||
uint32_t * value = new uint32_t[NChannel];
|
||
printf("\e[33m================================================\n");
|
||
printf("================ Setting for channel %d \n", ch);
|
||
printf("================================================\e[0m\n");
|
||
///DPP algorithm Control
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::DPPAlgorithmControl + (ch << 8), value);
|
||
printf(" 32 28 24 20 16 12 8 4 0\n");
|
||
printf(" | | | | | | | | |\n");
|
||
cout <<" DPP algorithm Control : 0b" << bitset<32>(value[0]) << endl;
|
||
|
||
int trapRescaling = int(value[0]) & 0x1f ;
|
||
int polarity = int(value[0] >> 16) & 0x1; /// in bit[16]
|
||
int baseline = int(value[0] >> 20) & 0x7; /// in bit[22:20]
|
||
int NsPeak = int(value[0] >> 12) & 0x3; /// in bit[13:12]
|
||
int rollOver = int(value[0] >> 26) & 0x1;
|
||
int pileUp = int(value[0] >> 27) & 0x1;
|
||
|
||
///DPP algorithm Control 2
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::DPPAlgorithmControl2_G + (ch << 8), value);
|
||
cout <<" DPP algorithm Control 2: 0b" << bitset<32>(value[0]) << endl;
|
||
|
||
int extras2WordOption = int(value[0] >> 8) & 0x3;
|
||
string extra2WordOptStr = "";
|
||
switch (extras2WordOption){
|
||
case 0 : extra2WordOptStr = "[0:15] Baseline *4 [16:31] Extended Time Stamp"; break;
|
||
case 2 : extra2WordOptStr = "[0:15] Fine Time Stamp [16:31] Extended Time Stamp"; break;
|
||
case 4 : extra2WordOptStr = "[0:15] Total Trigger Counter [16:31] Lost Trigger Counter"; break;
|
||
case 5 : extra2WordOptStr = "[0:15] Event After the Zero Crossing [16:31] Event Before the Zero Crossing"; break;
|
||
default: extra2WordOptStr = "Reserved"; break;
|
||
}
|
||
|
||
printf(" ch2ns : %.0f ns\n", ch2ns);
|
||
|
||
printf("==========----- input \n");
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::RecordLength_G + (ch << 8), value); printf("%24s %5d samples = %5.0f ns \n", "Record Length", ((value[0] * 8) & MaxRecordLength), ((value[0] * 8) & MaxRecordLength) * ch2ns); ///Record length
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PreTrigger + (ch << 8), value); printf("%24s %5d samples = %5.0f ns \n", "Pre-tigger", value[0] * 4, value[0] * 4 * ch2ns); ///Pre-trigger
|
||
printf("%24s %5.0f samples, DPP-[20:22]\n", "baseline mean", pow(4, 1 + baseline)); ///Ns baseline
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::ChannelDCOffset + (ch << 8), value); printf("%24s %.2f %% of %d\n", "DC offset", value[0] * 100./ ADCFullSize, ADCFullSize); ///DC offset
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::InputDynamicRange + (ch << 8), value); printf("%24s %.1f Vpp \n", "input Dynamic", value[0] == 0 ? 2 : 0.5); ///InputDynamic
|
||
printf("%24s %s, DPP-[16]\n", "polarity", polarity == 0 ? "Positive" : "negative"); ///Polarity
|
||
|
||
printf("==========----- discriminator \n");
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::TriggerThreshold + (ch << 8), value); printf("%24s %4d LSB\n", "Threshold", value[0]); ///Threshold
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::TriggerHoldOffWidth + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "trigger hold off", value[0], value[0] * 4 * ch2ns); ///Trigger Hold off
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::RCCR2SmoothingFactor + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Fast Dis. smoothing", (value[0] & 0x1f) * 2, (value[0] & 0x1f) * 2 * ch2ns ); ///Fast Discriminator smoothing
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::ShapedTriggerWidth + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Fast Dis. output width", value[0], value[0] * 4 * ch2ns); ///Fast Dis. output width
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::InputRiseTime + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Input rise time ", value[0], value[0] * 4 * ch2ns); ///Input rise time
|
||
|
||
printf("==========----- Trapezoid \n");
|
||
printf("%24s %4d bit = Floor( rise x decay / 64 ), DPP-[0:5]\n", "Trap. Rescaling", trapRescaling ); ///Trap. Rescaling Factor
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::TrapezoidRiseTime + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Trap. rise time", value[0], value[0] * 4 * ch2ns); ///Trap. rise time, 2 for 1 ch to 2ns
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::TrapezoidFlatTop + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Trap. flat time", value[0], value[0] * 4 * ch2ns); ///Trap. flat time
|
||
int flatTopTime = value[0] * 4 * ch2ns;
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::DecayTime + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Decay time", value[0], value[0] * 4 * ch2ns); ///Trap. pole zero
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::PeakingTime + (ch << 8), value); printf("%24s %4d samples, %5.0f ns = %.2f %% of FlatTop\n", "Peaking time", value[0], value[0] * 4 * ch2ns, value[0] * 400. * ch2ns / flatTopTime ); ///Peaking time
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::PeakHoldOff + (ch << 8), value); printf("%24s %4d samples, %5.0f ns \n", "Peak hole off", value[0], value[0] * 4 *ch2ns ); ///Peak hold off
|
||
printf("%24s %4.0f samples, DPP-[12:13]\n", "Peak mean", pow(4, NsPeak)); ///Ns peak
|
||
|
||
printf("==========----- Other \n");
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::FineGain + (ch << 8), value); printf("%24s %d \n", "Energy fine gain", value[0]); ///Energy fine gain
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::ChannelADCTemperature + (ch << 8), value); printf("%24s %d C\n", "Temperature", value[0]); ///Temperature
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::RiseTimeValidationWindow + (ch << 8), value); printf("%24s %.0f ns \n", "RiseTime Vaild Win.", value[0] * ch2ns);
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::NumberEventsPerAggregate_G + (ch << 8), value); printf("%24s %d \n", "Event Aggregate", value[0] & 0x3FF);
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::PHA::ChannelStopAcquisition + (ch << 8), value); printf("%24s %d = %s \n", "Stop Acq bit", value[0] & 1 , (value[0] & 1 ) == 0 ? "Run" : "Stop");
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::ChannelStatus + (ch << 8), value); printf("%24s 0x%x \n", "Status bit", (value[0] & 0xff) );
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::AMCFirmwareRevision + (ch << 8), value); printf("%24s 0x%x \n", "AMC firmware rev.", value[0] );
|
||
CAEN_DGTZ_ReadRegister(handle, Register::DPP::VetoWidth + (ch << 8), value); printf("%24s 0x%x \n", "VetoWidth bit", value[0] );
|
||
printf("%24s %d = %s\n", "RollOverFlag, DPP-[26]", rollOver, rollOver ? "enable" : "disable" );
|
||
printf("%24s %d = %s\n", "Pile-upFlag, DPP-[27]", pileUp, pileUp ? "enable" : "disable" );
|
||
printf("%24s %d, %s \n", "Extra2 opt, DPP2-[8:10]", extras2WordOption, extra2WordOptStr.c_str());
|
||
|
||
printf("========================================= end of ch-%d\n", ch);
|
||
|
||
}
|