1458 lines
70 KiB
C++
1458 lines
70 KiB
C++
#include <TApplication.h>
|
|
#include <TGClient.h>
|
|
#include <TCanvas.h>
|
|
#include <TF1.h>
|
|
#include <TRandom.h>
|
|
#include <TRootEmbeddedCanvas.h>
|
|
#include <TGTableContainer.h>
|
|
#include <TGFileDialog.h>
|
|
|
|
#include "boardSetting.h"
|
|
|
|
TString boardSettingName[NUM_BOARD_INFO] = { "Model",
|
|
"DPP Type",
|
|
"Link Type",
|
|
"Serial Number",
|
|
"Number of channels",
|
|
"Sampling rate",
|
|
"ADC bit",
|
|
"ROC version",
|
|
"AMC version"
|
|
};
|
|
|
|
BoardSetting::BoardSetting(const TGWindow *p, UInt_t w, UInt_t h, Digitizer ** digi, int nBoard){
|
|
|
|
this->nDigi = nBoard;
|
|
this->digi = digi;
|
|
|
|
gClient->GetColorByName("red", red);
|
|
gClient->GetColorByName("blue", blue);
|
|
|
|
fMain = new TGMainFrame(p,w,h);
|
|
fMain->SetWindowName("Board Settings & Status");
|
|
fMain->Connect("CloseWindow()", "BoardSetting", this, "CloseWindow()");
|
|
|
|
TGLayoutHints * layoutHints = new TGLayoutHints(kLHintsCenterX | kLHintsCenterY, 5,5,3,3); /// left, right, top, bottom
|
|
TGVerticalFrame * vframe = new TGVerticalFrame(fMain); fMain->AddFrame(vframe, layoutHints);
|
|
|
|
///==========Module choose
|
|
TGHorizontalFrame *hframe0 = new TGHorizontalFrame(vframe, w, 50 ); vframe->AddFrame(hframe0, layoutHints);
|
|
|
|
TGLabel * lb0 = new TGLabel(hframe0, "Board ID :"); hframe0->AddFrame(lb0, layoutHints);
|
|
boardIDEntry = new TGNumberEntry(hframe0, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); hframe0->AddFrame(boardIDEntry, new TGLayoutHints(kLHintsCenterX , 5, 5, 3, 4));
|
|
|
|
boardIDEntry->SetWidth(50);
|
|
boardIDEntry->SetLimits(TGNumberFormat::kNELLimitMinMax, 0, nBoard-1);
|
|
boardIDEntry->Connect("Modified()", "BoardSetting", this, "ChangeBoard()");
|
|
if( nBoard <= 1 ) boardIDEntry->SetState(false);
|
|
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
/// Board Failure status
|
|
TGLabel * lbPLLStatus = new TGLabel(hframe0, "PLL status :"); hframe0->AddFrame(lbPLLStatus, layoutHints);
|
|
enPLLStatus = new TGTextEntry(hframe0, ""); hframe0->AddFrame(enPLLStatus, layoutHints);
|
|
enPLLStatus->SetEnabled(false);
|
|
enPLLStatus->Resize(50, 20);
|
|
|
|
TGLabel * lbTempStatus = new TGLabel(hframe0, "Temp status :"); hframe0->AddFrame(lbTempStatus, layoutHints);
|
|
enTempStatus = new TGTextEntry(hframe0, ""); hframe0->AddFrame(enTempStatus, layoutHints);
|
|
enTempStatus->SetEnabled(false);
|
|
enTempStatus->Resize(50, 20);
|
|
|
|
TGLabel * lbADCPwrStatus = new TGLabel(hframe0, "ADC Power :"); hframe0->AddFrame(lbADCPwrStatus, layoutHints);
|
|
enADCPwrStatus = new TGTextEntry(hframe0, ""); hframe0->AddFrame(enADCPwrStatus, layoutHints);
|
|
enADCPwrStatus->SetEnabled(false);
|
|
enADCPwrStatus->Resize(50, 20);
|
|
|
|
TGTextButton * bSoftwareReset = new TGTextButton(hframe0, "Reset Settings to default"); hframe0->AddFrame(bSoftwareReset, layoutHints);
|
|
bSoftwareReset->Connect("Clicked()", "BoardSetting", this, "ResetSettingToDefault()");
|
|
|
|
TGTextButton * bSoftwareClear = new TGTextButton(hframe0, "Clear Buffer"); hframe0->AddFrame(bSoftwareClear, layoutHints);
|
|
bSoftwareClear->Connect("Clicked()", "BoardSetting", this, "ClearBuffer()");
|
|
|
|
{///=========== Setting file
|
|
TGHorizontalFrame *hframe1 = new TGHorizontalFrame(vframe); vframe->AddFrame(hframe1, new TGLayoutHints(kLHintsLeft, 5, 5, 0, 0));
|
|
|
|
TGTextButton * bProgramBoardFromFile = new TGTextButton(hframe1, "Load File"); hframe1->AddFrame(bProgramBoardFromFile, new TGLayoutHints( kLHintsLeft | kLHintsCenterY, 5,5,3,3));
|
|
bProgramBoardFromFile->Connect("Clicked()", "BoardSetting", this, "ProgramBoardFromFile()");
|
|
|
|
TGTextButton * bSaveFile = new TGTextButton(hframe1, "Save As"); hframe1->AddFrame(bSaveFile, new TGLayoutHints( kLHintsLeft | kLHintsCenterY, 5,5,3,3));
|
|
bSaveFile->Connect("Clicked()", "BoardSetting", this, "SaveSettingFile()");
|
|
|
|
TGLabel * lbSettingFile = new TGLabel(hframe1, "Setting file :"); hframe1->AddFrame(lbSettingFile, new TGLayoutHints(kLHintsLeft | kLHintsCenterY, 5,5,4,2));
|
|
txtSettingFile = new TGTextEntry(hframe1, ""); hframe1->AddFrame(txtSettingFile, new TGLayoutHints(kLHintsLeft | kLHintsCenterY, 5,5,3,3));
|
|
txtSettingFile->SetEnabled(false);
|
|
txtSettingFile->Resize(650, 20);
|
|
if( digi != NULL ) txtSettingFile->SetText( digi[boardID]->GetSettingFileName().c_str());
|
|
|
|
}
|
|
|
|
{///============ fixed info
|
|
TGGroupFrame * gInfo = new TGGroupFrame(vframe, "Board Info", kHorizontalFrame); vframe->AddFrame(gInfo, new TGLayoutHints(kLHintsExpandX, 5, 0, 0, 0));
|
|
TGHorizontalFrame * hframeInfo = new TGHorizontalFrame(gInfo); gInfo->AddFrame(hframeInfo, new TGLayoutHints(kLHintsExpandX));
|
|
|
|
int numCol = 3;
|
|
TGVerticalFrame * vframeInfo[numCol];
|
|
for( int i = 0; i < numCol ; i++) {
|
|
vframeInfo[i] = new TGVerticalFrame(hframeInfo); hframeInfo->AddFrame(vframeInfo[i],new TGLayoutHints(kLHintsExpandX));
|
|
}
|
|
|
|
TGHorizontalFrame *hframe[NUM_BOARD_INFO];
|
|
TGLabel * lb[NUM_BOARD_INFO];
|
|
for( int i = 0 ; i < NUM_BOARD_INFO; i++){
|
|
hframe[i] = new TGHorizontalFrame(vframeInfo[i%3], 50, 50 ); vframeInfo[i%3]->AddFrame(hframe[i], new TGLayoutHints(kLHintsRight, 2,2,0,0));
|
|
|
|
lb[i] = new TGLabel(hframe[i], boardSettingName[i]); hframe[i]->AddFrame(lb[i], new TGLayoutHints(kLHintsLeft | kLHintsCenterY, 5, 5, 0, 0));
|
|
|
|
entry[i] = new TGTextEntry(hframe[i], new TGTextBuffer(1)); hframe[i]->AddFrame(entry[i], new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
entry[i]->SetEnabled(false);
|
|
}
|
|
}
|
|
|
|
TGHorizontalFrame * hRow3 = new TGHorizontalFrame(vframe); vframe->AddFrame(hRow3, new TGLayoutHints(kLHintsExpandX));
|
|
|
|
{///========= ACD Status
|
|
TGGroupFrame * gAcqStatus = new TGGroupFrame(hRow3, "ACQ Status", kHorizontalFrame); hRow3->AddFrame(gAcqStatus, new TGLayoutHints(kLHintsExpandX, 5, 5, 0, 0));
|
|
TGHorizontalFrame * hfAcqStatus = new TGHorizontalFrame(gAcqStatus); gAcqStatus->AddFrame(hfAcqStatus, new TGLayoutHints(kLHintsExpandX));
|
|
|
|
TGVerticalFrame * vAcqStatus1 = new TGVerticalFrame(hfAcqStatus); hfAcqStatus->AddFrame(vAcqStatus1);
|
|
|
|
txtACQStatus = new TGTextEntry(vAcqStatus1, new TGTextBuffer(1)); vAcqStatus1->AddFrame(txtACQStatus, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQStatus->SetEnabled(false);
|
|
txtACQStatus->SetText( "ACQ is stopped" );
|
|
|
|
txtACQEventReady = new TGTextEntry(vAcqStatus1, new TGTextBuffer(1)); vAcqStatus1->AddFrame(txtACQEventReady, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQEventReady->SetEnabled(false);
|
|
txtACQEventReady->SetText( "no Event" );
|
|
|
|
txtACQEventFull = new TGTextEntry(vAcqStatus1, new TGTextBuffer(1)); vAcqStatus1->AddFrame(txtACQEventFull, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQEventFull->SetEnabled(false);
|
|
txtACQEventFull->SetText( "no channel FULL" );
|
|
|
|
txtACQClockSource = new TGTextEntry(vAcqStatus1, new TGTextBuffer(1)); vAcqStatus1->AddFrame(txtACQClockSource, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQClockSource->SetEnabled(false);
|
|
txtACQClockSource->SetText( "Internal Clock" );
|
|
|
|
TGVerticalFrame * vAcqStatus2 = new TGVerticalFrame(hfAcqStatus); hfAcqStatus->AddFrame(vAcqStatus2);
|
|
|
|
txtACQPLLLock = new TGTextEntry(vAcqStatus2, new TGTextBuffer(1)); vAcqStatus2->AddFrame(txtACQPLLLock, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQPLLLock->SetEnabled(false);
|
|
txtACQPLLLock->SetText( "PLL unlock" );
|
|
|
|
txtACQChDown = new TGTextEntry(vAcqStatus2, new TGTextBuffer(1)); vAcqStatus2->AddFrame(txtACQChDown, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQChDown->SetEnabled(false);
|
|
txtACQChDown->SetText( "Channels are ON" );
|
|
|
|
txtACQSIN = new TGTextEntry(vAcqStatus2, new TGTextBuffer(1)); vAcqStatus2->AddFrame(txtACQSIN, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQSIN->SetEnabled(false);
|
|
txtACQSIN->SetText( "S-IN = 0" );
|
|
|
|
txtACQTRIGIN = new TGTextEntry(vAcqStatus2, new TGTextBuffer(1)); vAcqStatus2->AddFrame(txtACQTRIGIN, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQTRIGIN->SetEnabled(false);
|
|
txtACQTRIGIN->SetText( "TRG-IN = 0" );
|
|
|
|
TGVerticalFrame * vAcqStatus4 = new TGVerticalFrame(hfAcqStatus); hfAcqStatus->AddFrame(vAcqStatus4);
|
|
|
|
txtACQBoardReady = new TGTextEntry(vAcqStatus4, new TGTextBuffer(1)); vAcqStatus4->AddFrame(txtACQBoardReady, new TGLayoutHints(kLHintsLeft, 5,5,0,0));
|
|
txtACQBoardReady->SetEnabled(false);
|
|
txtACQBoardReady->SetText( "Board NOT Ready (PLL & ADCs are NOT sync)" );
|
|
txtACQBoardReady->Resize(280, 20);
|
|
|
|
TGHorizontalFrame * hfAcqTemp = new TGHorizontalFrame(vAcqStatus4); vAcqStatus4->AddFrame(hfAcqTemp, new TGLayoutHints(kLHintsExpandY , 5, 5, 3, 0));
|
|
|
|
TGVerticalFrame * vAcqTemp1 = new TGVerticalFrame(hfAcqTemp); hfAcqTemp->AddFrame(vAcqTemp1);
|
|
TGLabel * lbdummy0 = new TGLabel(vAcqTemp1, " ch :"); vAcqTemp1->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 0, 2));
|
|
lbdummy0->Resize(60, 20);
|
|
TGLabel * lbACQTemp = new TGLabel(vAcqTemp1, "Temp. Stat.:"); vAcqTemp1->AddFrame(lbACQTemp, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 2, 2));
|
|
lbACQTemp->Resize(60, 20);
|
|
|
|
TGVerticalFrame * vAcqTemp2 = new TGVerticalFrame(hfAcqTemp); hfAcqTemp->AddFrame(vAcqTemp2);
|
|
TGLabel * lbch0 = new TGLabel(vAcqTemp2, "0-3"); vAcqTemp2->AddFrame(lbch0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 0, 0));
|
|
lbch0->Resize(40, 20);
|
|
txtACQTemp0 = new TGTextEntry(vAcqTemp2, new TGTextBuffer(1)); vAcqTemp2->AddFrame(txtACQTemp0, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQTemp0->SetEnabled(false);
|
|
txtACQTemp0->SetText( "<70" );
|
|
txtACQTemp0->Resize(40, 20);
|
|
|
|
TGVerticalFrame * vAcqTemp3 = new TGVerticalFrame(hfAcqTemp); hfAcqTemp->AddFrame(vAcqTemp3);
|
|
TGLabel * lbch1 = new TGLabel(vAcqTemp3, "4-7"); vAcqTemp3->AddFrame(lbch1, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 0, 0));
|
|
lbch1->Resize(40,20);
|
|
txtACQTemp1 = new TGTextEntry(vAcqTemp3, new TGTextBuffer(1)); vAcqTemp3->AddFrame(txtACQTemp1, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQTemp1->SetEnabled(false);
|
|
txtACQTemp1->SetText( "<70" );
|
|
txtACQTemp1->Resize(40,20);
|
|
|
|
TGVerticalFrame * vAcqTemp4 = new TGVerticalFrame(hfAcqTemp); hfAcqTemp->AddFrame(vAcqTemp4);
|
|
TGLabel * lbch2 = new TGLabel(vAcqTemp4, "8-11"); vAcqTemp4->AddFrame(lbch2, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 0, 0));
|
|
lbch2->Resize(40, 20);
|
|
txtACQTemp2 = new TGTextEntry(vAcqTemp4, new TGTextBuffer(1)); vAcqTemp4->AddFrame(txtACQTemp2, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQTemp2->SetEnabled(false);
|
|
txtACQTemp2->SetText( "<70" );
|
|
txtACQTemp2->Resize(40,20);
|
|
|
|
TGVerticalFrame * vAcqTemp5 = new TGVerticalFrame(hfAcqTemp); hfAcqTemp->AddFrame(vAcqTemp5);
|
|
TGLabel * lbch3 = new TGLabel(vAcqTemp5, "12-15"); vAcqTemp5->AddFrame(lbch3, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 0, 0));
|
|
lbch3->Resize(40, 20);
|
|
txtACQTemp3 = new TGTextEntry(vAcqTemp5, new TGTextBuffer(1)); vAcqTemp5->AddFrame(txtACQTemp3, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtACQTemp3->SetEnabled(false);
|
|
txtACQTemp3->SetText( "<70" );
|
|
txtACQTemp3->Resize(40,20);
|
|
|
|
}
|
|
|
|
{///==========="Readout Status"
|
|
TGGroupFrame * gReadoutStatus = new TGGroupFrame(hRow3, "Readout Status", kHorizontalFrame); hRow3->AddFrame(gReadoutStatus, new TGLayoutHints( kLHintsExpandY, 0, 0, 0, 0) );
|
|
|
|
TGVerticalFrame * vReadoutStatus = new TGVerticalFrame(gReadoutStatus); gReadoutStatus->AddFrame(vReadoutStatus, new TGLayoutHints(kLHintsCenterY | kLHintsExpandY, 5, 5, 10, 0));
|
|
|
|
txtEventReady = new TGTextEntry(vReadoutStatus, new TGTextBuffer(1)); vReadoutStatus->AddFrame(txtEventReady, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtEventReady->SetEnabled(false);
|
|
txtEventReady->SetText( "Event Ready" );
|
|
txtEventReady->Resize(150,20);
|
|
txtEventReady->SetTextColor(blue);
|
|
|
|
txtBusError = new TGTextEntry(vReadoutStatus, new TGTextBuffer(1)); vReadoutStatus->AddFrame(txtBusError, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtBusError->SetEnabled(false);
|
|
txtBusError->SetText( "no Bus Error" );
|
|
txtBusError->Resize(150,20);
|
|
txtBusError->SetTextColor(blue);
|
|
|
|
txtVMEFIFO = new TGTextEntry(vReadoutStatus, new TGTextBuffer(1)); vReadoutStatus->AddFrame(txtVMEFIFO, new TGLayoutHints(kLHintsRight, 5,5,0,0));
|
|
txtVMEFIFO->SetEnabled(false);
|
|
txtVMEFIFO->SetText( "VME FIFO EMPTY" );
|
|
txtVMEFIFO->Resize(150,20);
|
|
txtVMEFIFO->SetTextColor(blue);
|
|
}
|
|
|
|
TGHorizontalFrame * hRow0 = new TGHorizontalFrame(vframe); vframe->AddFrame(hRow0, new TGLayoutHints( kLHintsExpandX));
|
|
//hRow0->ChangeOptions((hRow0->GetOptions() | kFixedHeight));
|
|
//hRow0->
|
|
|
|
TGTextButton * bProgramDefaultBoard = new TGTextButton(hRow0, "Program Default Board"); hRow0->AddFrame(bProgramDefaultBoard, new TGLayoutHints( kLHintsExpandX | kLHintsExpandY, 5, 0, 5, 0));
|
|
bProgramDefaultBoard->Connect("Clicked()", "BoardSetting", this, "ProgramDefaultBoard()");
|
|
|
|
TGTextButton * bUpdateStatus = new TGTextButton(hRow0, "Update Status and Settings"); hRow0->AddFrame(bUpdateStatus, new TGLayoutHints( kLHintsExpandX | kLHintsExpandY, 5, 0, 5, 0));
|
|
bUpdateStatus->Connect("Clicked()", "BoardSetting", this, "ChangeBoard()");
|
|
|
|
TGTextButton * bOpenChannelSetting = new TGTextButton(hRow0, "Open Channel Setting"); hRow0->AddFrame(bOpenChannelSetting, new TGLayoutHints( kLHintsExpandX | kLHintsExpandY, 5, 0, 5, 0));
|
|
bOpenChannelSetting->Connect("Clicked()", "BoardSetting", this, "OpenChannelSetting()");
|
|
|
|
TGTextButton * bReadData = new TGTextButton(hRow0, "Read Data"); hRow0->AddFrame(bReadData, new TGLayoutHints( kLHintsExpandX | kLHintsExpandY, 5, 0, 5, 0));
|
|
bReadData->Connect("Clicked()", "BoardSetting", this, "ReadData()");
|
|
|
|
TGHorizontalFrame * hRow1 = new TGHorizontalFrame(vframe); vframe->AddFrame(hRow1, new TGLayoutHints( kLHintsExpandX));
|
|
|
|
{///========= Board Configure
|
|
TGGroupFrame * gBdCfg = new TGGroupFrame(hRow1, "Board Configure", kHorizontalFrame); hRow1->AddFrame(gBdCfg, new TGLayoutHints( kLHintsLeft, 5, 5, 0, 0));
|
|
|
|
TGVerticalFrame * vBdCfg0 = new TGVerticalFrame(gBdCfg); gBdCfg->AddFrame(vBdCfg0 );
|
|
|
|
TGHorizontalFrame * hBdCfg = new TGHorizontalFrame(vBdCfg0); vBdCfg0->AddFrame(hBdCfg, new TGLayoutHints( kLHintsLeft));
|
|
|
|
TGVerticalFrame * vBdCfg1 = new TGVerticalFrame(hBdCfg); hBdCfg->AddFrame(vBdCfg1, new TGLayoutHints( kLHintsLeft, 5, 5, 10, 0) );
|
|
|
|
TGLayoutHints * haha = new TGLayoutHints( kLHintsLeft, 5, 5, 3, 0);
|
|
|
|
bAutoDataFlush = new TGCheckButton(vBdCfg1, "Auto Data Flush", 1); vBdCfg1->AddFrame(bAutoDataFlush, haha);
|
|
bAutoDataFlush->SetState(kButtonUp);
|
|
bAutoDataFlush->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
bDecimateWF = new TGCheckButton(vBdCfg1, "Decimate WaveForm", 1); vBdCfg1->AddFrame(bDecimateWF, haha);
|
|
bDecimateWF->SetState(kButtonUp);
|
|
bDecimateWF->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
bWFRecord = new TGCheckButton(vBdCfg1, "Record WaveFrom", 1); vBdCfg1->AddFrame(bWFRecord, haha);
|
|
bWFRecord->SetState(kButtonUp);
|
|
bWFRecord->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
bTrigPropa = new TGCheckButton(vBdCfg1, "Trigger Propagation (coincidence) ", 1); vBdCfg1->AddFrame(bTrigPropa, haha);
|
|
bTrigPropa->SetState(kButtonUp);
|
|
bTrigPropa->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
bExtrac2 = new TGCheckButton(vBdCfg1, "Enable Extra2 word", 1); vBdCfg1->AddFrame(bExtrac2, haha);
|
|
bExtrac2->SetState(kButtonUp);
|
|
bExtrac2->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
|
|
TGVerticalFrame * vBdCfg2 = new TGVerticalFrame(hBdCfg); hBdCfg->AddFrame(vBdCfg2, new TGLayoutHints( kLHintsLeft, 5, 5, 10, 0));
|
|
|
|
bDualTrace = new TGCheckButton(vBdCfg2, "Dual Trace", 1); vBdCfg2->AddFrame(bDualTrace);
|
|
bDualTrace->SetState(kButtonUp);
|
|
bDualTrace->Connect("Clicked()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
|
|
TGHorizontalFrame * hBdCfg_Probe = new TGHorizontalFrame(vBdCfg2); vBdCfg2->AddFrame(hBdCfg_Probe);
|
|
|
|
TGVerticalFrame * vBdCfg_Probe_Label = new TGVerticalFrame(hBdCfg_Probe); hBdCfg_Probe->AddFrame(vBdCfg_Probe_Label);
|
|
|
|
TGVerticalFrame * vBdCfg_Probe_CBox = new TGVerticalFrame(hBdCfg_Probe); hBdCfg_Probe->AddFrame(vBdCfg_Probe_CBox);
|
|
|
|
TGLayoutHints * kaka = new TGLayoutHints( kLHintsRight, 5, 5, 3, 2);
|
|
|
|
TGLabel * lbAP1 = new TGLabel(vBdCfg_Probe_Label, "Ana. Prb. 1"); vBdCfg_Probe_Label->AddFrame(lbAP1, kaka);
|
|
cbAP1 = new TGComboBox(vBdCfg_Probe_CBox, "Ana. Pb. 1", 1); vBdCfg_Probe_CBox->AddFrame(cbAP1);
|
|
cbAP1->EnableTextInput(false);
|
|
cbAP1->AddEntry("Input", 0);
|
|
cbAP1->AddEntry("RC-CR (1st derivative)", 1);
|
|
cbAP1->AddEntry("RC-CR2 (2st derivative)", 2);
|
|
cbAP1->AddEntry("Trapezoid", 3);
|
|
cbAP1->Resize(150, 20);
|
|
cbAP1->Connect("Changed()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
TGLabel * lbAP2 = new TGLabel(vBdCfg_Probe_Label, "Ana. Prb. 2"); vBdCfg_Probe_Label->AddFrame(lbAP2, kaka);
|
|
cbAP2 = new TGComboBox(vBdCfg_Probe_CBox, "Ana. Pb. 2", 1); vBdCfg_Probe_CBox->AddFrame(cbAP2);
|
|
cbAP2->EnableTextInput(false);
|
|
cbAP2->AddEntry("N/A", -3);
|
|
cbAP2->AddEntry("Input", 0);
|
|
cbAP2->AddEntry("Threshold", 1);
|
|
cbAP2->AddEntry("Trapezoid - Baseline", 2);
|
|
cbAP2->AddEntry("Baseline", 3);
|
|
cbAP2->Resize(150, 20);
|
|
cbAP2->SetEnabled(false);
|
|
cbAP2->Connect("Changed()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
TGLabel * lbDP1 = new TGLabel(vBdCfg_Probe_Label, "Digi. Prb. 1"); vBdCfg_Probe_Label->AddFrame(lbDP1, kaka);
|
|
cbDP1 = new TGComboBox(vBdCfg_Probe_CBox, "Digital. Pb.", 1); vBdCfg_Probe_CBox->AddFrame(cbDP1);
|
|
cbDP1->EnableTextInput(false);
|
|
cbDP1->AddEntry("Peaking", 0);
|
|
cbDP1->AddEntry("Armed (Triggered)", 1);
|
|
cbDP1->AddEntry("Peak Run", 2);
|
|
cbDP1->AddEntry("Pile-Up", 3);
|
|
cbDP1->AddEntry("Peaking", 4);
|
|
cbDP1->AddEntry("TRG Validation Win.", 5);
|
|
cbDP1->AddEntry("Baseline freeze", 6);
|
|
cbDP1->AddEntry("TRG holdoff", 7);
|
|
cbDP1->AddEntry("TRG Validation", 8);
|
|
cbDP1->AddEntry("ACQ busy", 9);
|
|
cbDP1->AddEntry("Zero Cross", 10);
|
|
cbDP1->AddEntry("Ext. TRG", 11);
|
|
cbDP1->AddEntry("Memory full", 12);
|
|
cbDP1->Resize(150, 20);
|
|
cbDP1->Connect("Changed()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
TGLabel * lbDP2 = new TGLabel(vBdCfg_Probe_Label, "Digi. Prb. 2"); vBdCfg_Probe_Label->AddFrame(lbDP2, kaka);
|
|
cbDP2 = new TGComboBox(vBdCfg_Probe_CBox, "Digital. Pb.", 1); vBdCfg_Probe_CBox->AddFrame(cbDP2);
|
|
cbDP2->EnableTextInput(false);
|
|
cbDP2->AddEntry("N/A", -3);
|
|
cbDP2->AddEntry("Trigger", 0);
|
|
cbDP2->Resize(150, 20);
|
|
cbDP2->Connect("Changed()", "BoardSetting", this, "SetBoardConfiguration()");
|
|
|
|
TGHorizontalFrame * hframeBdCfg3 = new TGHorizontalFrame(vBdCfg0); vBdCfg0->AddFrame(hframeBdCfg3, new TGLayoutHints( kLHintsCenterX, 5, 5, 5, 5));
|
|
|
|
TGVerticalFrame * vBdCfga_label = new TGVerticalFrame(hframeBdCfg3); hframeBdCfg3->AddFrame(vBdCfga_label, new TGLayoutHints( kLHintsLeft, 5, 5, 10, 0) );
|
|
TGVerticalFrame * vBdCfga_CBox = new TGVerticalFrame(hframeBdCfg3); hframeBdCfg3->AddFrame(vBdCfga_CBox, new TGLayoutHints( kLHintsLeft, 5, 5, 10, 0) );
|
|
|
|
TGLabel * lbAggOrg = new TGLabel(vBdCfga_label, "Aggregate Organization"); vBdCfga_label->AddFrame(lbAggOrg, kaka);
|
|
cbAggOrg = new TGComboBox(vBdCfga_CBox, "Aggregate Organization", 1); vBdCfga_CBox->AddFrame(cbAggOrg);
|
|
cbAggOrg->EnableTextInput(false);
|
|
cbAggOrg->AddEntry("Not used", 0);
|
|
cbAggOrg->AddEntry("4", 2);
|
|
cbAggOrg->AddEntry("8", 3);
|
|
cbAggOrg->AddEntry("16", 4);
|
|
cbAggOrg->AddEntry("32", 5);
|
|
cbAggOrg->AddEntry("64", 6);
|
|
cbAggOrg->AddEntry("128", 7);
|
|
cbAggOrg->AddEntry("256", 8);
|
|
cbAggOrg->AddEntry("512", 9);
|
|
cbAggOrg->AddEntry("1024", 10);
|
|
cbAggOrg->Resize(100, 20);
|
|
cbAggOrg->Connect("Changed()", "BoardSetting", this, "SetAggregateOrganization()");
|
|
|
|
TGLabel * lbAggBLT = new TGLabel(vBdCfga_label, "MAx. Aggregate pre Readout"); vBdCfga_label->AddFrame(lbAggBLT, kaka);
|
|
numAggBLT = new TGNumberEntry(vBdCfga_CBox, 50, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vBdCfga_CBox->AddFrame(numAggBLT);
|
|
numAggBLT->SetWidth(100);
|
|
numAggBLT->SetLimits(TGNumberFormat::kNELLimitMinMax, 0, 0x3FF);
|
|
numAggBLT->Connect("Modified()", "BoardSetting", this, "SetReadOutAggregate()");
|
|
|
|
///"FanSpeed Control",
|
|
TGLabel * lbFanCtrl = new TGLabel(vBdCfga_label, "Fan Speed Control", kHorizontalFrame); vBdCfga_label->AddFrame(lbFanCtrl, kaka);
|
|
cbFanCtrl = new TGComboBox(vBdCfga_CBox, "",1); vBdCfga_CBox->AddFrame(cbFanCtrl);
|
|
cbFanCtrl->EnableTextInput(false);
|
|
cbFanCtrl->AddEntry("N/A",0);
|
|
cbFanCtrl->AddEntry("Slow/Auto",0x30);
|
|
cbFanCtrl->AddEntry("Fast", 0x38);
|
|
cbFanCtrl->Resize(100, 20);
|
|
cbFanCtrl->Connect("Changed()", "BoardSetting", this, "SetFanSpeedControl()");
|
|
|
|
}
|
|
|
|
{///========== ACQ control
|
|
TGGroupFrame * gAcqCtrl = new TGGroupFrame(hRow1, "ACQ Control", kHorizontalFrame); hRow1->AddFrame(gAcqCtrl , new TGLayoutHints(kLHintsExpandX | kLHintsExpandY));
|
|
|
|
TGVerticalFrame * vAcqCtrl1 = new TGVerticalFrame(gAcqCtrl); gAcqCtrl->AddFrame(vAcqCtrl1, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 5, 5, 10, 10));
|
|
|
|
TGHorizontalFrame * hAcqCtrl_a = new TGHorizontalFrame(vAcqCtrl1); vAcqCtrl1->AddFrame(hAcqCtrl_a);
|
|
|
|
TGVerticalFrame * vAcqCtrl_label = new TGVerticalFrame(hAcqCtrl_a); hAcqCtrl_a->AddFrame(vAcqCtrl_label );
|
|
TGVerticalFrame * vAcqCtrl_CBox = new TGVerticalFrame(hAcqCtrl_a); hAcqCtrl_a->AddFrame(vAcqCtrl_CBox);
|
|
|
|
TGLayoutHints * haha = new TGLayoutHints( kLHintsRight, 5, 5, 6, 5);
|
|
TGLayoutHints * kaka = new TGLayoutHints( kLHintsLeft, 5, 5, 3, 2);
|
|
|
|
TGLabel * lbAcqMode = new TGLabel(vAcqCtrl_label, "ACQ Mode"); vAcqCtrl_label->AddFrame(lbAcqMode, haha);
|
|
cbAcqMode = new TGComboBox(vAcqCtrl_CBox, "ACQ Mode", 1); vAcqCtrl_CBox->AddFrame(cbAcqMode, kaka);
|
|
cbAcqMode->EnableTextInput(false);
|
|
cbAcqMode->AddEntry("Software", 0);
|
|
cbAcqMode->AddEntry("S-IN / GPI", 1);
|
|
cbAcqMode->AddEntry("1st Trig. Ctrl.", 2);
|
|
cbAcqMode->AddEntry("LVSD Ctrl.", 3);
|
|
cbAcqMode->Resize(100, 20);
|
|
cbAcqMode->Connect("Changed()", "BoardSetting", this, "SetACQControl()");
|
|
|
|
TGLabel * lbPLLref = new TGLabel(vAcqCtrl_label, "PLL Ref."); vAcqCtrl_label->AddFrame(lbPLLref, haha);
|
|
cbPLLref = new TGComboBox(vAcqCtrl_CBox, "PLL Ref.", 1); vAcqCtrl_CBox->AddFrame(cbPLLref, kaka);
|
|
cbPLLref->EnableTextInput(false);
|
|
cbPLLref->AddEntry("internal", 0);
|
|
cbPLLref->AddEntry("external", 1);
|
|
cbPLLref->Resize(100, 20);
|
|
cbPLLref->Connect("Changed()", "BoardSetting", this, "SetACQControl()");
|
|
|
|
TGLabel * lbRunStartStopDelay = new TGLabel(vAcqCtrl_label, "Run/Start/Stop Delay [ns]"); vAcqCtrl_label->AddFrame(lbRunStartStopDelay, haha);
|
|
numRunStartStopDelay = new TGNumberEntry(vAcqCtrl_CBox, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vAcqCtrl_CBox->AddFrame(numRunStartStopDelay, kaka);
|
|
numRunStartStopDelay->SetWidth(100);
|
|
numRunStartStopDelay->SetLimits(TGNumberFormat::kNELLimitMinMax, 0, 0x0FF);
|
|
numRunStartStopDelay->Connect("Modified()", "BoardSetting", this, "SetRunStartStopDelay()");
|
|
|
|
bAcqArm = new TGCheckButton(vAcqCtrl_CBox, "ACQ Start/Arm", 1); vAcqCtrl_CBox->AddFrame(bAcqArm, kaka);
|
|
bAcqArm->SetState(kButtonUp);
|
|
bAcqArm->Connect("Clicked()", "BoardSetting", this, "SetACQControl()");
|
|
|
|
TGHorizontalFrame * hAcqCtrl_b = new TGHorizontalFrame(vAcqCtrl1); vAcqCtrl1->AddFrame(hAcqCtrl_b, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 0, 0, 10, 0));
|
|
bSWTrigger = new TGTextButton(hAcqCtrl_b, "Send Software Trigger Signal"); hAcqCtrl_b->AddFrame(bSWTrigger, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY));
|
|
bSWTrigger->Connect("Clicked()", "BoardSetting", this, "SendSoftwareTriggerSignal()");
|
|
bSWTrigger->SetWidth(250);
|
|
|
|
TGHorizontalFrame * hAcqCtrl_c = new TGHorizontalFrame(vAcqCtrl1); vAcqCtrl1->AddFrame(hAcqCtrl_c, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 0, 0, 10, 0));
|
|
bSWClockSync = new TGTextButton(hAcqCtrl_c, "Send Software Clock Sync Signal"); hAcqCtrl_c->AddFrame(bSWClockSync, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY));
|
|
bSWClockSync->Connect("Clicked()", "BoardSetting", this, "SendSoftwareClockSyncSignal()");
|
|
bSWClockSync->Resize(250, 20);
|
|
|
|
}
|
|
|
|
{///========= Trigger Configure
|
|
TGGroupFrame * gTRGCfg = new TGGroupFrame(vframe, "Trigger Configure", kHorizontalFrame); vframe->AddFrame(gTRGCfg, new TGLayoutHints(kLHintsExpandX));
|
|
TGVerticalFrame * vTRGCfg = new TGVerticalFrame(gTRGCfg); gTRGCfg->AddFrame(vTRGCfg, new TGLayoutHints(kLHintsExpandX));
|
|
|
|
///--- various type of triggers
|
|
TGHorizontalFrame * hframeTRGCfg = new TGHorizontalFrame(vTRGCfg); vTRGCfg->AddFrame(hframeTRGCfg, new TGLayoutHints(kLHintsCenterY, 2,2,2,2));
|
|
TGVerticalFrame * vTRGType = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGType, new TGLayoutHints(kLHintsCenterX , 5, 5, 3, 4));
|
|
|
|
///"Disable External Trigger",
|
|
bEnableExtTRG = new TGCheckButton(vTRGType, "Enable Ext. Trigger", 1); vTRGType->AddFrame(bEnableExtTRG);
|
|
bEnableExtTRG->Connect("Clicked()", "BoardSetting", this, "SetEnableExternalTrigger()");
|
|
|
|
|
|
TGLabel * lbdummy0 = new TGLabel(vTRGType, "");
|
|
vTRGType->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
//vTRGType->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
|
|
TGLayoutHints * haha = new TGLayoutHints(kLHintsCenterX , 2, 2, 3, 3);
|
|
|
|
TGVerticalFrame * vTRGMsk[8];
|
|
TGLabel * lbTRGMskCh0[8];
|
|
TGLabel * lbTRGMskCh1[8];
|
|
for( int i = 0; i < 8; i++){
|
|
vTRGMsk[i] = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk[i], haha);
|
|
lbTRGMskCh0[i] = new TGLabel(vTRGMsk[i], Form("%d", 2*i)); vTRGMsk[i]->AddFrame(lbTRGMskCh0[i], haha);
|
|
lbTRGMskCh1[i] = new TGLabel(vTRGMsk[i], Form("%d", 2*i+1)); vTRGMsk[i]->AddFrame(lbTRGMskCh1[i], haha);
|
|
}
|
|
|
|
///"Global Trigger Mask",
|
|
TGLabel * lbGbTRGMsk = new TGLabel(vTRGType, "Global Trigger Mask"); vTRGType->AddFrame(lbGbTRGMsk, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
for( int i = 0; i < 8; i++){
|
|
cbGbTRGMskCh[i] = new TGCheckButton(vTRGMsk[i], ""); vTRGMsk[i]->AddFrame(cbGbTRGMskCh[i], haha);
|
|
cbGbTRGMskCh[i]->Connect("Clicked()", "BoardSetting", this, "SetGlobalTriggerMask()");
|
|
}
|
|
|
|
///"Trigger Validation Mask",
|
|
TGLabel * lbTRGValMsk = new TGLabel(vTRGType, "Trigger Validation Mask"); vTRGType->AddFrame(lbTRGValMsk, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
for( int i = 0; i < 8; i++){
|
|
cbTRGValMskCh[i] = new TGCheckButton(vTRGMsk[i], ""); vTRGMsk[i]->AddFrame(cbTRGValMskCh[i], haha);
|
|
cbTRGValMskCh[i]->Connect("Clicked()", "BoardSetting", this, "SetTriggerValidMask()");
|
|
}
|
|
|
|
///"Front Panel TRG-OUT Enable Mask",
|
|
TGLabel * lbTRGOUTMsk = new TGLabel(vTRGType, "TRG-OUT Mask"); vTRGType->AddFrame(lbTRGOUTMsk, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
for( int i = 0; i < 8; i++){
|
|
cbTRGOUTMskCh[i] = new TGCheckButton(vTRGMsk[i], ""); vTRGMsk[i]->AddFrame(cbTRGOUTMskCh[i], haha);
|
|
cbTRGOUTMskCh[i]->Connect("Clicked()", "BoardSetting", this, "SetTRGOUTMask()");
|
|
}
|
|
|
|
TGVerticalFrame * vTRGMsk1 = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk1, haha);
|
|
vTRGMsk1->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
vTRGMsk1->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
TGLabel * lbMajorCoinWin = new TGLabel(vTRGMsk1, "Maj. Coin. Win."); vTRGMsk1->AddFrame(lbMajorCoinWin, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
TGLabel * lbTRGMODE = new TGLabel(vTRGMsk1, "TRG Vali. MODE"); vTRGMsk1->AddFrame(lbTRGMODE, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
TGLabel * lbTRGOUTMODE = new TGLabel(vTRGMsk1, "TRG-OUT MODE"); vTRGMsk1->AddFrame(lbTRGOUTMODE, new TGLayoutHints(kLHintsRight | kLHintsCenterY , 5, 5, 3, 4));
|
|
|
|
TGVerticalFrame * vTRGMsk2 = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk2, haha);
|
|
vTRGMsk2->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
vTRGMsk2->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
|
|
numMajorCoinWin = new TGNumberEntry(vTRGMsk2, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vTRGMsk2->AddFrame(numMajorCoinWin);
|
|
numMajorCoinWin->Resize(70, 20);
|
|
numMajorCoinWin->Connect("Modified()", "BoardSetting", this, "SetGlobalTriggerMask()");
|
|
|
|
cbTRGMODE = new TGComboBox(vTRGMsk2, "TRG Val. MODE",1); vTRGMsk2->AddFrame(cbTRGMODE);
|
|
cbTRGMODE->EnableTextInput(false);
|
|
cbTRGMODE->AddEntry("OR", 0);
|
|
cbTRGMODE->AddEntry("AND", 1);
|
|
cbTRGMODE->AddEntry("Majority", 2);
|
|
cbTRGMODE->Resize(70, 20);
|
|
cbTRGMODE->Connect("Changed()", "BoardSetting", this, "SetTriggerValidMask()");
|
|
|
|
cbTRGOUTMODE = new TGComboBox(vTRGMsk2, "TRG-OUT MODE",1); vTRGMsk2->AddFrame(cbTRGOUTMODE);
|
|
cbTRGOUTMODE->EnableTextInput(false);
|
|
cbTRGOUTMODE->AddEntry("OR", 0);
|
|
cbTRGOUTMODE->AddEntry("AND", 1);
|
|
cbTRGOUTMODE->AddEntry("Majority", 2);
|
|
cbTRGOUTMODE->Resize(70, 20);
|
|
cbTRGOUTMODE->Connect("Changed()", "BoardSetting", this, "SetTRGOUTMask()");
|
|
|
|
TGVerticalFrame * vTRGMsk3 = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk3, haha);
|
|
vTRGMsk3->AddFrame(lbdummy0, new TGLayoutHints(kLHintsLeft | kLHintsCenterY , 5, 5, 3, 4));
|
|
TGLabel * lbMajorLevel = new TGLabel(vTRGMsk3, "Majority Level"); vTRGMsk3->AddFrame(lbMajorLevel, layoutHints);
|
|
GlbMajorLevel = new TGNumberEntry(vTRGMsk3, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vTRGMsk3->AddFrame(GlbMajorLevel, new TGLayoutHints(kLHintsCenterY, 2,2,2,2));
|
|
GlbMajorLevel->Resize(70, 17);
|
|
GlbMajorLevel->Connect("Modified()", "BoardSetting", this, "SetGlobalTriggerMask()");
|
|
|
|
TRGMajorLevel = new TGNumberEntry(vTRGMsk3, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vTRGMsk3->AddFrame(TRGMajorLevel, new TGLayoutHints(kLHintsCenterY, 2,2,2,2));
|
|
TRGMajorLevel->Resize(70, 17);
|
|
TRGMajorLevel->Connect("Modified()", "BoardSetting", this, "SetTriggerValidMask()");
|
|
|
|
TRGOUTMajorLevel = new TGNumberEntry(vTRGMsk3, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vTRGMsk3->AddFrame(TRGOUTMajorLevel, new TGLayoutHints(kLHintsCenterY, 2,2,2,2));
|
|
TRGOUTMajorLevel->Resize(70, 17);
|
|
TRGOUTMajorLevel->Connect("Modified()", "BoardSetting", this, "SetTRGOUTMask()");
|
|
|
|
TGVerticalFrame * vTRGMsk5 = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk5, haha);
|
|
TGLabel * lbExtTrigger = new TGLabel(vTRGMsk5, "Ext."); vTRGMsk5->AddFrame(lbExtTrigger, layoutHints);
|
|
TGLabel * lbdummy2 = new TGLabel(vTRGMsk5, "Trg."); vTRGMsk5->AddFrame(lbdummy2, layoutHints);
|
|
|
|
bGLBExtTrigger = new TGCheckButton(vTRGMsk5, "", 1); vTRGMsk5->AddFrame(bGLBExtTrigger, layoutHints);
|
|
bGLBExtTrigger->SetState(kButtonUp);
|
|
bGLBExtTrigger->Connect("Clicked()", "BoardSetting", this, "SetGlobalTriggerMask()");
|
|
|
|
bTRGExtTrigger = new TGCheckButton(vTRGMsk5, "", 1); vTRGMsk5->AddFrame(bTRGExtTrigger, layoutHints);
|
|
bTRGExtTrigger->SetState(kButtonUp);
|
|
bTRGExtTrigger->Connect("Clicked()", "BoardSetting", this, "SetTriggerValidMask()");
|
|
|
|
bTRGOUTExtTrigger = new TGCheckButton(vTRGMsk5, "", 1); vTRGMsk5->AddFrame(bTRGOUTExtTrigger, layoutHints);
|
|
bTRGOUTExtTrigger->SetState(kButtonUp);
|
|
bTRGOUTExtTrigger->Connect("Clicked()", "BoardSetting", this, "SetTRGOUTMask()");
|
|
|
|
TGVerticalFrame * vTRGMsk6 = new TGVerticalFrame(hframeTRGCfg); hframeTRGCfg->AddFrame(vTRGMsk6, haha);
|
|
TGLabel * lbSWTrigger = new TGLabel(vTRGMsk6, "SW"); vTRGMsk6->AddFrame(lbSWTrigger, layoutHints);
|
|
TGLabel * lbdummy3 = new TGLabel(vTRGMsk6, "Trg."); vTRGMsk6->AddFrame(lbdummy3, layoutHints);
|
|
|
|
bGLBSoftwareTrigger = new TGCheckButton(vTRGMsk6, "", 1); vTRGMsk6->AddFrame(bGLBSoftwareTrigger, layoutHints);
|
|
bGLBSoftwareTrigger->SetState(kButtonDown);
|
|
bGLBSoftwareTrigger->Connect("Clicked()", "BoardSetting", this, "SetGlobalTriggerMask()");
|
|
|
|
bTRGSoftwareTrigger = new TGCheckButton(vTRGMsk6, "", 1); vTRGMsk6->AddFrame(bTRGSoftwareTrigger, layoutHints);
|
|
bTRGSoftwareTrigger->SetState(kButtonDown);
|
|
bTRGSoftwareTrigger->Connect("Clicked()", "BoardSetting", this, "SetTriggerValidMask()");
|
|
|
|
bTRGOUTSoftwareTrigger = new TGCheckButton(vTRGMsk6, "", 1); vTRGMsk6->AddFrame(bTRGOUTSoftwareTrigger, layoutHints);
|
|
bTRGOUTSoftwareTrigger->SetState(kButtonDown);
|
|
bTRGOUTSoftwareTrigger->Connect("Clicked()", "BoardSetting", this, "SetTRGOUTMask()");
|
|
|
|
TGHorizontalFrame * hframeTRGCfg2 = new TGHorizontalFrame(vTRGCfg); vTRGCfg->AddFrame(hframeTRGCfg2, new TGLayoutHints(kLHintsCenterY | kLHintsLeft, 2,2,2,2));
|
|
|
|
///"Extended Veto Delay", only when bit[9] of 0x8100 = 1
|
|
///TGLabel * lbExtendVetoDelay = new TGLabel(hframeTRGCfg2, "Extended Veto Delay"); hframeTRGCfg2->AddFrame(lbExtendVetoDelay, new TGLayoutHints(kLHintsCenterY , 5, 5, 3, 4));
|
|
///numExtendVetoDelay = new TGNumberEntry(hframeTRGCfg2, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); hframeTRGCfg2->AddFrame(numExtendVetoDelay, new TGLayoutHints(kLHintsCenterY , 5, 5, 3, 4));
|
|
///numExtendVetoDelay->Resize(70, 17);
|
|
///numExtendVetoDelay->Connect("Modified()", "BoardSetting", this, "SetExtendedVetoDelay()");
|
|
}
|
|
|
|
TGHorizontalFrame * hRow2 = new TGHorizontalFrame(vframe); vframe->AddFrame(hRow2, new TGLayoutHints(kLHintsExpandX));
|
|
|
|
{///=================="Front Panel IO Control",
|
|
TGGroupFrame * gFrontIOCtrl = new TGGroupFrame(hRow2, "Front Panel IO Control", kHorizontalFrame); hRow2->AddFrame(gFrontIOCtrl, new TGLayoutHints( kLHintsExpandX, 5, 5, 0, 0) );
|
|
|
|
TGHorizontalFrame * hFrontIOCtrl = new TGHorizontalFrame(gFrontIOCtrl); gFrontIOCtrl->AddFrame(hFrontIOCtrl);
|
|
|
|
TGVerticalFrame * vFrontIOCtrl_label = new TGVerticalFrame(hFrontIOCtrl); hFrontIOCtrl->AddFrame(vFrontIOCtrl_label);
|
|
TGVerticalFrame * vFrontIOCtrl_CBox = new TGVerticalFrame(hFrontIOCtrl); hFrontIOCtrl->AddFrame(vFrontIOCtrl_CBox);
|
|
|
|
TGLayoutHints * haha = new TGLayoutHints( kLHintsRight, 5, 5, 3, 2);
|
|
|
|
TGLabel * lbLEMOIO = new TGLabel(vFrontIOCtrl_label, "LEMO I/O"); vFrontIOCtrl_label->AddFrame(lbLEMOIO, haha);
|
|
cbLEMOIO = new TGComboBox(vFrontIOCtrl_CBox, "",1); vFrontIOCtrl_CBox->AddFrame(cbLEMOIO);
|
|
cbLEMOIO->EnableTextInput(false);
|
|
cbLEMOIO->AddEntry("NIM", 0);
|
|
cbLEMOIO->AddEntry("TTL", 1);
|
|
cbLEMOIO->Resize(50, 20);
|
|
cbLEMOIO->Connect("Changed()", "BoardSetting", this, "SetFrontPanelIO()");
|
|
|
|
///use 0x811C, bit:[14:19], 6bits
|
|
TGLabel * lbTRGOUTMODE2 = new TGLabel(vFrontIOCtrl_label, "TRG-OUT Mode"); vFrontIOCtrl_label->AddFrame(lbTRGOUTMODE2, haha);
|
|
cbTRGOUTmode = new TGComboBox(vFrontIOCtrl_CBox, "",1); vFrontIOCtrl_CBox->AddFrame(cbTRGOUTmode);
|
|
cbTRGOUTmode->EnableTextInput(false);
|
|
cbTRGOUTmode->AddEntry("Disable", 0x00002); /// this is TRG_OUT high imped. 0x811C bit[1]
|
|
cbTRGOUTmode->AddEntry("force TRG-OUT is 0", 0x08000);
|
|
cbTRGOUTmode->AddEntry("force TRG-OUT is 1", 0x0C000);
|
|
cbTRGOUTmode->AddEntry("Trigger", 0x00000);
|
|
cbTRGOUTmode->AddEntry("Channel Probe", 0x20000);
|
|
cbTRGOUTmode->AddEntry("S-IN", 0x30000);
|
|
cbTRGOUTmode->AddEntry("RUN", 0x10000);
|
|
cbTRGOUTmode->AddEntry("Sync Clock", 0x50000);
|
|
cbTRGOUTmode->AddEntry("Clock Phase", 0x90000);
|
|
cbTRGOUTmode->AddEntry("BUSY/UNLOCK", 0xD0000);
|
|
cbTRGOUTmode->Resize(160, 20);
|
|
cbTRGOUTmode->Connect("Changed()", "BoardSetting", this, "SetFrontPanelIO()");
|
|
|
|
TGLabel * lbTRGINCtrl = new TGLabel(vFrontIOCtrl_label, "TRG-IN control"); vFrontIOCtrl_label->AddFrame(lbTRGINCtrl, haha);
|
|
cbTRGINCtrl = new TGComboBox(vFrontIOCtrl_CBox, "",1); vFrontIOCtrl_CBox->AddFrame(cbTRGINCtrl);
|
|
cbTRGINCtrl->EnableTextInput(false);
|
|
cbTRGINCtrl->AddEntry("Trigger sync with the edge of the TRIG-IN", 0);
|
|
cbTRGINCtrl->AddEntry("Trigger sync with the whole TRIG-IN", 1);
|
|
cbTRGINCtrl->Resize(250, 20);
|
|
cbTRGINCtrl->Connect("Changed()", "BoardSetting", this, "SetFrontPanelIO()");
|
|
|
|
TGLabel * lbTRGINMezzanines = new TGLabel(vFrontIOCtrl_label, "TRG-IN to Mezzanines"); vFrontIOCtrl_label->AddFrame(lbTRGINMezzanines, haha);
|
|
cbTRGINMezzanines = new TGComboBox(vFrontIOCtrl_CBox, "",1); vFrontIOCtrl_CBox->AddFrame(cbTRGINMezzanines);
|
|
cbTRGINMezzanines->EnableTextInput(false);
|
|
cbTRGINMezzanines->AddEntry("Trigger local is sync with TRG-IN", 0);
|
|
cbTRGINMezzanines->AddEntry("TRG-IN send to mezzanines (no delay)", 1);
|
|
cbTRGINMezzanines->Resize(200, 20);
|
|
cbTRGINMezzanines->Connect("Changed()", "BoardSetting", this, "SetFrontPanelIO()");
|
|
|
|
///"Front Panel LVDS IO New Features",
|
|
///"LVDS IO Data",
|
|
|
|
///"Analog Monitor Mode
|
|
TGLabel * lbAnaMonitor = new TGLabel(vFrontIOCtrl_label, "Analog Monitor Mode (MON/Sigma)"); vFrontIOCtrl_label->AddFrame(lbAnaMonitor, haha);
|
|
cbAnaMonitor = new TGComboBox(vFrontIOCtrl_CBox, "",1); vFrontIOCtrl_CBox->AddFrame(cbAnaMonitor);
|
|
cbAnaMonitor->EnableTextInput(false);
|
|
cbAnaMonitor->AddEntry("Trigger Majority", 0);
|
|
cbAnaMonitor->AddEntry("Test", 1);
|
|
cbAnaMonitor->AddEntry("Buffer Occupancy", 3);
|
|
cbAnaMonitor->AddEntry("Voltage Level", 4);
|
|
cbAnaMonitor->Resize(150, 20);
|
|
cbAnaMonitor->Connect("Changed()", "BoardSetting", this, "SetAnalogMonitorMode()");
|
|
//cbAnaMonitor->Connect("Changed()", "ChannelSettingPHA", this, "ChangePolarity()"); //Example to call other class
|
|
|
|
///"Buffer Occupancy Gain
|
|
TGLabel * lbBufferOccpGain = new TGLabel(vFrontIOCtrl_label, "Buffer Occupancy Gain"); vFrontIOCtrl_label->AddFrame(lbBufferOccpGain, haha);
|
|
numBufferOccpGain = new TGNumberEntry(vFrontIOCtrl_CBox, 0, 0, 0, TGNumberFormat::kNESInteger, TGNumberFormat::kNEANonNegative); vFrontIOCtrl_CBox->AddFrame(numBufferOccpGain);
|
|
numBufferOccpGain->SetState(false);
|
|
numBufferOccpGain->Resize(70, 17);
|
|
numBufferOccpGain->Connect("Modified()", "BoardSetting", this, "SetAnalogMonitorMode()");
|
|
|
|
}
|
|
|
|
|
|
//TODO check is VME model
|
|
{///"Readout Control",
|
|
TGGroupFrame * gReadoutCtrl = new TGGroupFrame(hRow2, "ReadOut Control", kHorizontalFrame); hRow2->AddFrame(gReadoutCtrl, new TGLayoutHints( kLHintsExpandY));
|
|
TGVerticalFrame * vReadoutCtrl = new TGVerticalFrame(gReadoutCtrl); gReadoutCtrl->AddFrame(vReadoutCtrl);
|
|
|
|
TGHorizontalFrame * hReadoutCtrl = new TGHorizontalFrame(vReadoutCtrl); vReadoutCtrl->AddFrame(hReadoutCtrl, new TGLayoutHints( kLHintsLeft, 5, 5, 5, 5));
|
|
|
|
TGLabel * lbVMEInterruptLevel = new TGLabel(hReadoutCtrl, "VME Interrupt Level"); hReadoutCtrl->AddFrame(lbVMEInterruptLevel,new TGLayoutHints( kLHintsLeft, 5, 5, 3, 3));
|
|
cbVMEInterrupLevel = new TGComboBox(hReadoutCtrl, "", 1); hReadoutCtrl->AddFrame(cbVMEInterrupLevel);
|
|
cbVMEInterrupLevel->EnableTextInput(false);
|
|
cbVMEInterrupLevel->AddEntry("Disabled", 0);
|
|
cbVMEInterrupLevel->AddEntry("1", 1);
|
|
cbVMEInterrupLevel->AddEntry("2", 2);
|
|
cbVMEInterrupLevel->AddEntry("3", 3);
|
|
cbVMEInterrupLevel->AddEntry("4", 4);
|
|
cbVMEInterrupLevel->AddEntry("5", 5);
|
|
cbVMEInterrupLevel->AddEntry("6", 6);
|
|
cbVMEInterrupLevel->AddEntry("7", 7);
|
|
cbVMEInterrupLevel->Resize(80, 20);
|
|
cbVMEInterrupLevel->Connect("Changed()", "BoardSetting", this, "SetReadOutControl()");
|
|
|
|
bOpticalLinkInterrupt = new TGCheckButton(vReadoutCtrl, "Optical Link Interrupt", 1); vReadoutCtrl->AddFrame(bOpticalLinkInterrupt);
|
|
bOpticalLinkInterrupt->SetState(kButtonUp);
|
|
bOpticalLinkInterrupt->Connect("Clicked()", "BoardSetting", this, "SetReadOutControl()");
|
|
|
|
bEventAligned = new TGCheckButton(vReadoutCtrl, "Event Aligned Enabled", 1); vReadoutCtrl->AddFrame(bEventAligned);
|
|
bEventAligned->SetState(kButtonUp);
|
|
bEventAligned->Connect("Clicked()", "BoardSetting", this, "SetReadOutControl()");
|
|
|
|
bVMEAlogn64Mode = new TGCheckButton(vReadoutCtrl, "64-bit aligned", 1); vReadoutCtrl->AddFrame(bVMEAlogn64Mode);
|
|
bVMEAlogn64Mode->SetState(kButtonUp);
|
|
bVMEAlogn64Mode->Connect("Clicked()", "BoardSetting", this, "SetReadOutControl()");
|
|
|
|
bInteruptReleaseMode = new TGCheckButton(vReadoutCtrl, "Interrupt Release on Acknowldge", 1); vReadoutCtrl->AddFrame(bInteruptReleaseMode);
|
|
bInteruptReleaseMode->SetState(kButtonUp);
|
|
bInteruptReleaseMode->Connect("Clicked()", "BoardSetting", this, "SetReadOutControl()");
|
|
|
|
bEnableExtendedBlockTransfer = new TGCheckButton(vReadoutCtrl, "Enable Extended Block Transfer", 1); vReadoutCtrl->AddFrame(bEnableExtendedBlockTransfer);
|
|
bEnableExtendedBlockTransfer->SetState(kButtonUp);
|
|
bEnableExtendedBlockTransfer->Connect("Clicked()", "BoardSetting", this, "SetReadOutControl()");
|
|
}
|
|
|
|
|
|
///===== LVSD
|
|
TGHorizontalFrame * hframeNote1 = new TGHorizontalFrame(vframe); vframe->AddFrame(hframeNote1, new TGLayoutHints(kLHintsCenterY , 5,5,0,0));
|
|
TGLabel * lbNote1 = new TGLabel(hframeNote1, "LVSD Control is not impletmented."); hframeNote1->AddFrame(lbNote1, new TGLayoutHints(kLHintsCenterY | kLHintsLeft, 5, 5, 0, 0));
|
|
|
|
TGHorizontalFrame * hframeNote2 = new TGHorizontalFrame(vframe); vframe->AddFrame(hframeNote2, new TGLayoutHints(kLHintsCenterY , 5,5,0,0));
|
|
TGLabel * lbNote2 = new TGLabel(hframeNote2, "Trigger Validation Mask only for 0x8180."); hframeNote2->AddFrame(lbNote2, new TGLayoutHints(kLHintsCenterY | kLHintsLeft, 5, 5, 0, 0));
|
|
|
|
///==================== Read digitizer Setting
|
|
ChangeBoard();
|
|
|
|
fMain->MapSubwindows();
|
|
fMain->Resize(fMain->GetDefaultSize());
|
|
fMain->MapWindow();
|
|
|
|
isOpened = true;
|
|
|
|
///Setup thread
|
|
///readStatusThread = new TThread("readStatus", ReadStatus, (void *) 1);
|
|
///if( digi != NULL ) readStatusThread->Run();
|
|
}
|
|
|
|
BoardSetting::~BoardSetting(){
|
|
|
|
isOpened = false;
|
|
|
|
printf("close BoardSetting window\n");
|
|
|
|
//for( int i = 0; i < nDigi; i++) digi[i] = 0;
|
|
//pha = 0;
|
|
//psd = 0;
|
|
//delete readStatusThread;
|
|
|
|
delete boardIDEntry;
|
|
for(int i = 0; i < NUM_BOARD_INFO; i++) delete entry[i];
|
|
|
|
fMain->Cleanup();
|
|
delete fMain;
|
|
|
|
}
|
|
|
|
void BoardSetting::LogMsg(TString msg){
|
|
Emit("LogMsg(char*)", msg.Data());
|
|
}
|
|
|
|
void BoardSetting::DisableEdit(){ // When ACQ is running, disable all control
|
|
|
|
}
|
|
|
|
void BoardSetting::EnableEdit(){ // When ACQ is running, disable all control
|
|
|
|
}
|
|
|
|
void BoardSetting::ReadStatus(){
|
|
if( digi == NULL ) return;
|
|
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
/// ACQ Status
|
|
///digi[boardID]->PrintRegister(Register::DPP::AcquisitionStatus, "ACQ Status");
|
|
uint32_t temp = digi[boardID]->ReadRegister(Register::DPP::AcquisitionStatus_R);
|
|
|
|
txtACQStatus ->SetText( ((temp >> 2) & 0x1) == 0 ? "ACQ is stopped" : "ACQ is Running", false); txtACQStatus->SetTextColor( ((temp >> 2) & 0x1) == 0 ? 1 : blue);
|
|
txtACQEventReady ->SetText( ((temp >> 3) & 0x1) == 0 ? "no Event" : "Has Events", false); txtACQEventReady->SetTextColor( ((temp >> 3) & 0x1) == 0 ? 1 : blue);
|
|
txtACQEventFull ->SetText( ((temp >> 4) & 0x1) == 0 ? "no channel FULL" : "a channel FULL", false); txtACQEventFull->SetTextColor( ((temp >> 4) & 0x1) == 0 ? 1 : red);
|
|
txtACQClockSource->SetText( ((temp >> 5) & 0x1) == 0 ? "Internal Clock" : "External Clock", false); txtACQClockSource->SetTextColor( ((temp >> 5) & 0x1) == 0 ? 1 : blue);
|
|
txtACQPLLLock ->SetText( ((temp >> 7) & 0x1) == 0 ? "PLL no lock" : "PLL locked", false); txtACQPLLLock->SetTextColor( ((temp >> 7) & 0x1) == 0 ? 1 : blue);
|
|
txtACQBoardReady ->SetText( ((temp >> 8) & 0x1) == 0 ? "Board NOT Ready (PLL & ADCs are NOT sync)" : "Board Ready (PLL & ADCs are sync)", false);
|
|
txtACQBoardReady->SetTextColor( ((temp >> 8) & 0x1) == 0 ? red : 1);
|
|
txtACQChDown ->SetText( ((temp >> 19) & 0x1) == 0 ? "Channels are ON" : "Channels ShutDown", false);
|
|
txtACQChDown->SetTextColor( ((temp >> 19) & 0x1) == 0 ? 1 : red);
|
|
txtACQSIN ->SetText( ((temp >> 15) & 0x1) == 0 ? "S-IN = 0" : "S-IN = 1", false); txtACQSIN->SetTextColor( ((temp >> 15) & 0x1) == 0 ? 1 : blue);
|
|
txtACQTRIGIN ->SetText( ((temp >> 16) & 0x1) == 0 ? "TRG-IN = 0" : "TRG-IN = 1", false); txtACQTRIGIN->SetTextColor( ((temp >> 16) & 0x1) == 0 ? 1 : blue);
|
|
|
|
txtACQTemp0->SetText( ((temp >> 20) & 0x1) == 0 ? "< 70" : "> 70", false); txtACQTemp0->SetTextColor( ((temp >> 20) & 0x1) == 0 ? 1 : red);
|
|
txtACQTemp1->SetText( ((temp >> 21) & 0x1) == 0 ? "< 70" : "> 70", false); txtACQTemp1->SetTextColor( ((temp >> 21) & 0x1) == 0 ? 1 : red);
|
|
txtACQTemp2->SetText( ((temp >> 22) & 0x1) == 0 ? "< 70" : "> 70", false); txtACQTemp2->SetTextColor( ((temp >> 22) & 0x1) == 0 ? 1 : red);
|
|
txtACQTemp3->SetText( ((temp >> 23) & 0x1) == 0 ? "< 70" : "> 70", false); txtACQTemp3->SetTextColor( ((temp >> 23) & 0x1) == 0 ? 1 : red);
|
|
|
|
/// Redaout Status
|
|
///digi[boardID]->PrintRegister(Register::DPP::ReadoutStatus, "Readout Status");
|
|
temp = digi[boardID]->ReadRegister(Register::DPP::ReadoutStatus_R);
|
|
if( (temp & 0x1) == 1 ){
|
|
txtEventReady->SetText( "Event Ready" , false); txtEventReady->SetTextColor(blue);
|
|
}else{
|
|
txtEventReady->SetText( "No Data Ready" , false); txtEventReady->SetTextColor(red);
|
|
}
|
|
|
|
if( (( temp >> 2 ) & 0x1 ) == 0 ){
|
|
txtBusError->SetText( "no Bus Error", false ); txtBusError->SetTextColor(blue);
|
|
}else{
|
|
txtBusError->SetText( "Bus Error", false ); txtBusError->SetTextColor(red);
|
|
}
|
|
|
|
if( (( temp >> 3 ) & 0x1 ) == 0 ){
|
|
txtVMEFIFO->SetText( "VME FIFO NOT EMPTY", false ); txtVMEFIFO->SetTextColor(blue);
|
|
}else{
|
|
txtVMEFIFO->SetText( "VME FIFO EMPTY", false ); txtVMEFIFO->SetTextColor(red);
|
|
}
|
|
|
|
///================ Board Failure Status
|
|
///digi[boardID]->PrintRegister(Register::DPP::BoardFailureStatus, "Board Fail");
|
|
temp = digi[boardID]->GetSettingFromMemory(Register::DPP::BoardFailureStatus_R);
|
|
if( ((temp >> 4) & 0x1) == 0 ) {
|
|
enPLLStatus->SetText( "OK" , false); enPLLStatus->SetTextColor(1);
|
|
}else{
|
|
enPLLStatus->SetText( "Lost Lock" , false); enPLLStatus->SetTextColor(red);
|
|
}
|
|
|
|
if( ((temp >> 5) & 0x1) == 0 ) {
|
|
enTempStatus->SetText( "OK" , false); enTempStatus->SetTextColor(1);
|
|
}else{
|
|
enTempStatus->SetText( "Failure" , false); enTempStatus->SetTextColor(red);
|
|
}
|
|
|
|
if( ((temp >> 6) & 0x1) == 0 ) {
|
|
enADCPwrStatus->SetText( "OK", false); enADCPwrStatus->SetTextColor(1);
|
|
}else{
|
|
enADCPwrStatus->SetText( "Failure", false); enADCPwrStatus->SetTextColor(red);
|
|
}
|
|
|
|
}
|
|
|
|
void BoardSetting::ChangeBoard(){
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) {
|
|
printf("no didgitizers\n");
|
|
return;
|
|
}
|
|
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
txtSettingFile->SetText( digi[boardID]->GetSettingFileName().c_str() );
|
|
|
|
|
|
for( int i = 0; i < NUM_BOARD_INFO; i++){
|
|
switch (i) {
|
|
case 0 : entry[i]->SetText( Form("%s", (digi[boardID]->GetModelName()).c_str()) ); break;
|
|
case 1 :
|
|
|
|
switch (digi[boardID]->GetDPPType()){
|
|
case V1724_DPP_PHA_CODE: entry[i]->SetText("DPP-PHA", false); break;
|
|
case V1720_DPP_CI_CODE : entry[i]->SetText("DPP-CI ", false); break;
|
|
case V1720_DPP_PSD_CODE: entry[i]->SetText("DPP-PSD", false); break;
|
|
case V1751_DPP_PSD_CODE: entry[i]->SetText("DPP-PSD", false); break;
|
|
case V1751_DPP_ZLE_CODE: entry[i]->SetText("DPP-ZLE", false); break;
|
|
case V1743_DPP_CI_CODE: entry[i]->SetText("DPP-PSD", false); break;
|
|
case V1740_DPP_QDC_CODE: entry[i]->SetText("DPP-QDC", false); break;
|
|
case V1730_DPP_PSD_CODE: entry[i]->SetText("DPP-PSD", false); break;
|
|
case V1730_DPP_PHA_CODE: entry[i]->SetText("DPP-PHA", false); break;
|
|
case V1730_DPP_ZLE_CODE: entry[i]->SetText("DPP-ZLE", false); break;
|
|
case V1730_DPP_DAW_CODE: entry[i]->SetText("DPP-DAW", false); break;
|
|
}
|
|
|
|
break;
|
|
case 2 : entry[i]->SetText( Form("%s", digi[boardID]->GetLinkType() == CAEN_DGTZ_USB ? "USB" : "Optical Link"), false ); break;
|
|
case 3 : entry[i]->SetText( Form("%d", digi[boardID]->GetSerialNumber() ), false ); break;
|
|
case 4 : entry[i]->SetText( Form("%d", digi[boardID]->GetNChannel() ), false ); break;
|
|
case 5 : entry[i]->SetText( Form("%0.f MHz = %.1f ns", 1000/digi[boardID]->GetCh2ns(), digi[boardID]->GetCh2ns()), false ); break;
|
|
case 6 : entry[i]->SetText( Form("%d", digi[boardID]->GetADCBits() ), false ); break;
|
|
case 7 : entry[i]->SetText( Form("%s", (digi[boardID]->GetROCVersion()).c_str() ), false ); break;
|
|
case 8 : entry[i]->SetText( Form("%s", (digi[boardID]->GetAMCVersion()).c_str() ), false ); break;
|
|
}
|
|
}
|
|
|
|
cbAggOrg->Select( digi[boardID]->GetSettingFromMemory(Register::DPP::AggregateOrganization) , false);
|
|
numAggBLT->SetNumber( digi[boardID]->GetSettingFromMemory(Register::DPP::MaxAggregatePerBlockTransfer) , false);
|
|
|
|
if( digi[boardID]->GetNChannel() == 8 ){
|
|
///FAN Speed control only for desktop version
|
|
cbFanCtrl->SetEnabled(true);
|
|
cbFanCtrl->Select( digi[boardID]->GetSettingFromMemory(Register::DPP::FanSpeedControl) , false);
|
|
}else{
|
|
cbFanCtrl->SetEnabled(false);
|
|
cbFanCtrl->Select( 0 , false);
|
|
}
|
|
|
|
numRunStartStopDelay->SetNumber( digi[boardID]->GetSettingFromMemory(Register::DPP::RunStartStopDelay), false);
|
|
bEnableExtTRG->SetState( (digi[boardID]->GetSettingFromMemory(Register::DPP::DisableExternalTrigger) & 0x1) ? kButtonDown : kButtonUp, false);
|
|
///numExtendVetoDelay->SetNumber( digi[boardID]->GetSettingFromMemory(Register::DPP::ExtendedVetoDelay) , false);
|
|
|
|
cbAnaMonitor->Select( digi[boardID]->GetSettingFromMemory(Register::DPP::AnalogMonitorMode) & 0x7 , false);
|
|
numBufferOccpGain->SetNumber( digi[boardID]->GetSettingFromMemory(Register::DPP::BufferOccupancyGain) & 0xf, false);
|
|
|
|
ReadStatus();
|
|
|
|
/// ACQ Control
|
|
//digi[boardID]->PrintRegister(Register::DPP::AcquisitionControl, "AcquisitionControl");
|
|
uint32_t tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::AcquisitionControl);
|
|
cbAcqMode->Select( tempBits & 0x3 , false);
|
|
bAcqArm->SetState( ((tempBits >> 2) & 0x1) ? kButtonDown : kButtonUp, false);
|
|
cbPLLref->Select( ((tempBits >> 6) & 0x1), false);
|
|
|
|
/// Global Trigger Mask
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::GlobalTriggerMask);
|
|
for( int i = 0; i < 8; i++){
|
|
cbGbTRGMskCh[i]->SetState( ((tempBits >> i ) & 0x1) == 0 ? kButtonUp : kButtonDown , false);
|
|
}
|
|
numMajorCoinWin->SetNumber( (tempBits >> 20 ) & 0x7 , false);
|
|
GlbMajorLevel->SetNumber( ( tempBits >> 24) & 0x7 , false);
|
|
bGLBExtTrigger->SetState( (( tempBits >> 30) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
bGLBSoftwareTrigger->SetState( (( tempBits >> 31) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
|
|
/// Trigger Validation Mask
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::TriggerValidationMask_G);
|
|
for( int i = 0; i < 8; i++){
|
|
cbTRGValMskCh[i]->SetState( ((tempBits >> i ) & 0x1) == 0 ? kButtonUp : kButtonDown , false);
|
|
}
|
|
cbTRGMODE->Select( ( tempBits >> 8 ) & 0x3, false) ;
|
|
TRGMajorLevel->SetNumber( ( tempBits >> 10 ) & 0x3, false);
|
|
bTRGExtTrigger->SetState( (( tempBits >> 30) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
bTRGSoftwareTrigger->SetState( (( tempBits >> 31) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
|
|
/// Front Panel TRG-OUT Enable Mask , PHA = PSD only for bit[19:0]
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::FrontPanelTRGOUTEnableMask);
|
|
for( int i = 0; i < 8; i++){
|
|
cbTRGOUTMskCh[i]->SetState( ((tempBits >> i ) & 0x1) == 0 ? kButtonUp : kButtonDown, false );
|
|
}
|
|
cbTRGOUTMODE->Select( ( tempBits >> 8 ) & 0x3, false) ;
|
|
TRGOUTMajorLevel->SetNumber( ( tempBits >> 10 ) & 0x7, false);
|
|
bTRGOUTExtTrigger->SetState( (( tempBits >> 30) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
bTRGOUTSoftwareTrigger->SetState( (( tempBits >> 30) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false);
|
|
|
|
/// Front Panel I/O Control, PHA = PSD only for bit[19:0]
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::FrontPanelIOControl);
|
|
cbLEMOIO->Select( tempBits & 0x1 , false);
|
|
if( ((tempBits >> 1) & 0x1 ) == 0 ) {
|
|
cbTRGOUTmode->Select( 2 , false);
|
|
}else{
|
|
cbTRGOUTmode->Select( (tempBits) & 0x3F000 , false);
|
|
}
|
|
cbTRGINCtrl->Select( (tempBits >> 10) & 0x1 , false);
|
|
cbTRGINMezzanines->Select( (tempBits >> 11) & 0x1 , false);
|
|
|
|
/// Readout Control
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::ReadoutControl);
|
|
cbVMEInterrupLevel->Select( tempBits & 0x3 , false);
|
|
bOpticalLinkInterrupt->SetState( (( tempBits >> 3 ) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false) ;
|
|
bEventAligned->SetState( (( tempBits >> 4 ) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false) ;
|
|
bVMEAlogn64Mode->SetState( (( tempBits >> 5 ) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false) ;
|
|
bInteruptReleaseMode->SetState( (( tempBits >> 7 ) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false) ;
|
|
bEnableExtendedBlockTransfer->SetState( (( tempBits >> 8 ) & 0x1 ) == 0 ? kButtonUp : kButtonDown, false) ;
|
|
|
|
if( digi[boardID]->GetDPPType() == V1730_DPP_PHA_CODE ) {
|
|
|
|
bDecimateWF->SetEnabled(true);
|
|
|
|
cbAP1->RemoveAll();
|
|
cbAP1->AddEntry("Input", 0);
|
|
cbAP1->AddEntry("RC-CR (1st derivative)", 1);
|
|
cbAP1->AddEntry("RC-CR2 (2st derivative)", 2);
|
|
cbAP1->AddEntry("Trapezoid", 3);
|
|
|
|
cbAP2->SetEnabled(true);
|
|
cbAP2->RemoveAll();
|
|
cbAP2->AddEntry("N/A", -3);
|
|
cbAP2->AddEntry("Input", 0);
|
|
cbAP2->AddEntry("Threshold", 1);
|
|
cbAP2->AddEntry("Trapezoid - Baseline", 2);
|
|
cbAP2->AddEntry("Baseline", 3);
|
|
|
|
cbDP1->RemoveAll();
|
|
cbDP1->AddEntry("Peaking", 0);
|
|
cbDP1->AddEntry("Armed (Triggered)", 1);
|
|
cbDP1->AddEntry("Peak Run", 2);
|
|
cbDP1->AddEntry("Pile-Up", 3);
|
|
cbDP1->AddEntry("Peaking", 4); ///Duplicated?
|
|
cbDP1->AddEntry("TRG Validation Win.", 5);
|
|
cbDP1->AddEntry("Baseline freeze", 6);
|
|
cbDP1->AddEntry("TRG holdoff", 7);
|
|
cbDP1->AddEntry("TRG Validation", 8);
|
|
cbDP1->AddEntry("ACQ busy", 9);
|
|
cbDP1->AddEntry("Zero Cross", 10);
|
|
cbDP1->AddEntry("Ext. TRG", 11);
|
|
cbDP1->AddEntry("Memory full", 12);
|
|
|
|
cbDP2->RemoveAll();
|
|
cbDP2->AddEntry("N/A", -3);
|
|
cbDP2->AddEntry("Trigger", 0);
|
|
|
|
cbDP2->SetEnabled(false);
|
|
cbDP2->Select(-3, false);
|
|
|
|
/// Board Configuration
|
|
//digi[boardID]->PrintRegister(Register::DPP::BoardConfiguration, "BoardConfiguration");
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::BoardConfiguration);
|
|
|
|
bAutoDataFlush->SetState( (tempBits & 0x1) ? kButtonDown : kButtonUp, false);
|
|
bDecimateWF->SetState( ((tempBits >> 1) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
bWFRecord->SetState( ((tempBits >> 16) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
bTrigPropa->SetState( ((tempBits >> 2) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
bExtrac2->SetState( ((tempBits >> 17) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
|
|
//TODO remove bDualTrace, when cbAP2 is not -1, DualTrace is on
|
|
|
|
if( (tempBits >> 11) & 0x1 ){
|
|
bDualTrace->SetState( kButtonDown , false );
|
|
cbAP2->SetEnabled(true);
|
|
cbAP2->Select( ((tempBits >> 14) & 0x3) , false);
|
|
}else{
|
|
bDualTrace->SetState( kButtonUp , false );
|
|
cbAP2->SetEnabled(false);
|
|
cbAP2->Select(-3, false);
|
|
}
|
|
|
|
cbAP1->Select( ((tempBits >> 12) & 0x3) , false);
|
|
cbDP1->Select( ((tempBits >> 20) & 0x7) , false);
|
|
|
|
}else if( digi[boardID]->GetDPPType() == V1730_DPP_PSD_CODE ) {
|
|
|
|
bDecimateWF->SetEnabled(false);
|
|
cbDP2->SetEnabled(true);
|
|
|
|
cbAP1->RemoveAll();
|
|
cbAP1->AddEntry("Input", 0);
|
|
cbAP1->AddEntry("CFD", 1);
|
|
cbAP1->AddEntry("Input", 2);
|
|
|
|
cbAP2->SetEnabled(false);
|
|
cbAP2->RemoveAll();
|
|
cbAP2->AddEntry("N/A", -3);
|
|
cbAP2->AddEntry("Baseline", 0);
|
|
cbAP2->AddEntry("CFD", 1);
|
|
|
|
cbDP1->RemoveAll();
|
|
cbDP1->AddEntry("Long Gate", 0);
|
|
cbDP1->AddEntry("Over Threshold", 1);
|
|
cbDP1->AddEntry("Shaped TRG", 2);
|
|
cbDP1->AddEntry("TRG Val. Accep. Win.", 3);
|
|
cbDP1->AddEntry("Pile Up", 4);
|
|
cbDP1->AddEntry("Coincidence", 5);
|
|
cbDP1->AddEntry("Trigger", 7);
|
|
|
|
cbDP2->RemoveAll();
|
|
cbDP2->AddEntry("Short Gate", 0);
|
|
cbDP2->AddEntry("Over Threshold", 1);
|
|
cbDP2->AddEntry("TRG Validation", 2);
|
|
cbDP2->AddEntry("TRG Holdoff", 3);
|
|
cbDP2->AddEntry("PileUp Trigger", 4);
|
|
cbDP2->AddEntry("PSD Cut hight", 5);
|
|
cbDP2->AddEntry("Baseline freeze", 6);
|
|
cbDP2->AddEntry("Trigger", 7);
|
|
|
|
tempBits = digi[boardID]->GetSettingFromMemory(Register::DPP::BoardConfiguration);
|
|
|
|
bAutoDataFlush->SetState( (tempBits & 0x1) ? kButtonDown : kButtonUp, false);
|
|
bTrigPropa->SetState( ((tempBits >> 2) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
|
|
if( ((tempBits >> 11) & 0x1) == 1 ) { /// Dual Trace
|
|
bDualTrace->SetState(kButtonDown , false );
|
|
|
|
switch ((tempBits >> 12) & 0x3) {
|
|
case 0 : {
|
|
cbAP1->Select( 0, false);
|
|
cbAP2->Select( 0, false);
|
|
}; break;
|
|
|
|
case 1 : {
|
|
cbAP1->Select( 1, false);
|
|
cbAP2->Select( 0, false);
|
|
}; break;
|
|
|
|
case 2 : {
|
|
cbAP1->Select( 2, false);
|
|
cbAP2->Select( 1, false);
|
|
}; break;
|
|
}
|
|
}else{
|
|
bDualTrace->SetState( kButtonUp, false );
|
|
cbAP1->Select( ((tempBits >> 12) & 0x3) , false);
|
|
cbAP2->Select(-1, false);
|
|
}
|
|
|
|
bWFRecord->SetState( ((tempBits >> 16) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
bExtrac2->SetState( ((tempBits >> 17) & 0x1) ? kButtonDown : kButtonUp, false );
|
|
|
|
cbDP1->Select( ((tempBits >> 23) & 0x7) , false);
|
|
cbDP2->Select( ((tempBits >> 26) & 0x7) , false);
|
|
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
//################################################ Change Settings
|
|
|
|
void BoardSetting::OpenChannelSetting(){
|
|
printf("=== %s\n", __func__);
|
|
|
|
Int_t boardID = boardIDEntry->GetNumber();
|
|
Haha(boardID);
|
|
}
|
|
|
|
void BoardSetting::Haha(Int_t boardID){ /// this is for sending signal to mainwindow to open channel setting for the board
|
|
printf("=== %s\n", __func__);
|
|
Emit("Haha(Int_t)", boardID);
|
|
}
|
|
|
|
void BoardSetting::ResetSettingToDefault(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
digi[boardID]->Reset();
|
|
digi[boardID]->WriteRegister(Register::DPP::SoftwareReset_W, 1);
|
|
|
|
ChangeBoard();
|
|
|
|
}
|
|
|
|
void BoardSetting::ClearBuffer(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::SoftwareClear_W, 1);
|
|
|
|
ReadStatus();
|
|
}
|
|
|
|
void BoardSetting::SetBoardConfiguration(){
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
uint32_t bit = (3 << 18); /// timestamp and energy recording
|
|
if( digi[boardID]->GetDPPType() == V1730_DPP_PHA_CODE ) {
|
|
|
|
bit += (34 << 3) ; /// Reserved must be 0010010 for bit[10:3]
|
|
if( bAutoDataFlush->GetState() == kButtonDown ) { bit += 1;};
|
|
if( bDecimateWF->GetState() == kButtonDown ) bit += (1 << 1);
|
|
if( bWFRecord->GetState() == kButtonDown ) bit += ( 1 << 16);
|
|
if( bTrigPropa->GetState() == kButtonDown ) bit += ( 1 << 2);
|
|
if( bExtrac2->GetState() == kButtonDown ) bit += ( 1 << 17);
|
|
if( bDualTrace->GetState() == kButtonDown ) {
|
|
bit += ( 1 << 11);
|
|
cbAP2->SetEnabled(true);
|
|
}else{
|
|
cbAP2->SetEnabled(false);
|
|
cbAP2->Select(-3, false);
|
|
}
|
|
|
|
if( cbAP2->GetSelected() > 0 ) bit += (cbAP2->GetSelected() << 14);
|
|
|
|
bit += (cbAP1->GetSelected() << 12);
|
|
bit += (cbDP1->GetSelected() << 20);
|
|
|
|
}
|
|
|
|
if( digi[boardID]->GetDPPType() == V1730_DPP_PSD_CODE ) {
|
|
|
|
bit += (18 << 3) ; /// Reserved must be 0010010 for bit[10:3]
|
|
if( bAutoDataFlush->GetState() == kButtonDown ) bit += 1;
|
|
if( bDecimateWF->GetState() == kButtonDown ) bit += (1 << 1);
|
|
if( bWFRecord->GetState() == kButtonDown ) bit += ( 1 << 16);
|
|
if( bTrigPropa->GetState() == kButtonDown ) bit += ( 1 << 2);
|
|
if( bExtrac2->GetState() == kButtonDown ) bit += ( 1 << 17);
|
|
|
|
if( bDualTrace->GetState() == kButtonDown ) bit += ( 1 << 11);
|
|
bit += (cbAP1->GetSelected() << 12);
|
|
bit += (cbDP1->GetSelected() << 23);
|
|
bit += (cbDP2->GetSelected() << 26);
|
|
|
|
}
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
digi[boardID]->WriteRegister(Register::DPP::BoardConfiguration, bit);
|
|
}
|
|
|
|
void BoardSetting::SetAggregateOrganization(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::AggregateOrganization, cbAggOrg->GetSelected());
|
|
|
|
}
|
|
|
|
void BoardSetting::SetReadOutAggregate(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::MaxAggregatePerBlockTransfer, (unsigned int) numAggBLT->GetNumber());
|
|
|
|
}
|
|
|
|
void BoardSetting::SetFanSpeedControl(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::FanSpeedControl, cbFanCtrl->GetSelected() );
|
|
}
|
|
|
|
void BoardSetting::SetACQControl(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t bit = 0;
|
|
bit += ( cbAcqMode->GetSelected() );
|
|
bit += ( bAcqArm->GetState() == kButtonDown ? (1 << 2) : 0 );
|
|
bit += ( cbPLLref->GetSelected() << 6 );
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::AcquisitionControl, bit );
|
|
|
|
ReadStatus();
|
|
}
|
|
|
|
|
|
void BoardSetting::SendSoftwareTriggerSignal(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::SoftwareTrigger_W, 1 );
|
|
|
|
ReadStatus();
|
|
|
|
}
|
|
|
|
void BoardSetting::SendSoftwareClockSyncSignal(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->WriteRegister(Register::DPP::SoftwareClockSync_W, 1 );
|
|
}
|
|
|
|
void BoardSetting::SetRunStartStopDelay(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::RunStartStopDelay, (unsigned int) numRunStartStopDelay->GetNumber() );
|
|
}
|
|
|
|
void BoardSetting::SetGlobalTriggerMask(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t bit = 0;
|
|
for( int i = 0; i < 8; i ++ ) bit += ( (cbGbTRGMskCh[i]->GetState() == kButtonDown) ? (1 << i ) : 0);
|
|
bit += ( ((unsigned int) numMajorCoinWin->GetNumber() ) << 20 );
|
|
bit += ( ((unsigned int) GlbMajorLevel->GetNumber() ) << 24 );
|
|
bit += ( (bGLBExtTrigger->GetState() == kButtonDown) ? (1 << 30) : 0);
|
|
bit += ( (bGLBSoftwareTrigger->GetState() == kButtonDown) ? (1 << 31) : 0 );
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::GlobalTriggerMask, bit );
|
|
}
|
|
|
|
void BoardSetting::SetTriggerValidMask(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t bit = 0;
|
|
for( int i = 0; i < 8; i ++ ) bit += ( (cbTRGValMskCh[i]->GetState() == kButtonDown) ? (1 << i ) :0 );
|
|
bit += ( (cbTRGMODE->GetSelected() << 8) );
|
|
bit += ( ((unsigned int) TRGMajorLevel->GetNumber() ) << 24 );
|
|
bit += ( (bTRGExtTrigger->GetState() == kButtonDown) ? (1 << 30) : 0);
|
|
bit += ( (bTRGSoftwareTrigger->GetState() == kButtonDown) ? (1 << 31) : 0 );
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::TriggerValidationMask_G, bit );
|
|
}
|
|
|
|
void BoardSetting::SetTRGOUTMask(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t bit = 0;
|
|
for( int i = 0; i < 8; i ++ ) bit += ( (cbTRGOUTMskCh[i]->GetState() == kButtonDown) ? (1 << i ) : 0 );
|
|
bit += ( (cbTRGOUTMODE->GetSelected() << 8) );
|
|
bit += ( ((unsigned int) TRGOUTMajorLevel->GetNumber() ) << 24 );
|
|
bit += ( (bTRGOUTExtTrigger->GetState() == kButtonDown) ? (1 << 30) : 0 );
|
|
bit += ( (bTRGOUTSoftwareTrigger->GetState() == kButtonDown) ? (1 << 31) : 0 );
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::FrontPanelTRGOUTEnableMask, bit );
|
|
}
|
|
void BoardSetting::SetEnableExternalTrigger(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
if (bEnableExtTRG->GetState() == kButtonDown) {
|
|
digi[boardID]->WriteRegister(Register::DPP::DisableExternalTrigger, 0x1 );
|
|
}
|
|
}
|
|
|
|
void BoardSetting::SetExtendedVetoDelay(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
///digi[boardID]->WriteRegister(Register::DPP::ExtendedVetoDelay, (unsigned int) numExtendVetoDelay->GetNumber() );
|
|
}
|
|
|
|
void BoardSetting::SetFrontPanelIO(){ /// bit[20] different, bit[20] (PSD) not impletemented, PHA, bit[20] not use
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t bit = 0;
|
|
bit += ( cbLEMOIO->GetSelected() );
|
|
bit += cbTRGOUTmode->GetSelected() ;
|
|
|
|
//if( cbTRGOUTmode->GetSelected() != 2 ) { /// has TRG-OUT
|
|
// bit += cbTRGOUTmode->GetSelected() ;
|
|
//}else{
|
|
// bit += 0x2; /// TRG-OUT (high0impedance) or off
|
|
//}
|
|
bit += ( cbTRGINCtrl->GetSelected() << 10 );
|
|
bit += ( cbTRGINMezzanines->GetSelected() << 11 );
|
|
|
|
///bit[20] = 0 by default.
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::FrontPanelIOControl, bit );
|
|
}
|
|
|
|
void BoardSetting::SetAnalogMonitorMode(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::AnalogMonitorMode, cbAnaMonitor->GetSelected() );
|
|
|
|
if( cbAnaMonitor->GetSelected() == 3) {
|
|
numBufferOccpGain->SetState(true);
|
|
digi[boardID]->WriteRegister(Register::DPP::BufferOccupancyGain, (int) numBufferOccpGain->GetNumber() );
|
|
}else{
|
|
numBufferOccpGain->SetState(false);
|
|
}
|
|
}
|
|
|
|
void BoardSetting::SetReadOutControl(){ /// same for PHA and PSD
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
uint32_t bit = 0;
|
|
|
|
bit += cbVMEInterrupLevel->GetSelected();
|
|
bit += ( (bOpticalLinkInterrupt->GetState() == kButtonDown) ? (1 << 3) : 0 );
|
|
bit += ( (bEventAligned->GetState() == kButtonDown) ? (1 << 4) : 0 );
|
|
bit += ( (bVMEAlogn64Mode->GetState() == kButtonDown) ? (1 << 5) : 0 );
|
|
bit += ( (bInteruptReleaseMode->GetState() == kButtonDown) ? (1 << 7) : 0 );
|
|
bit += ( (bEnableExtendedBlockTransfer->GetState() == kButtonDown) ? (1 << 8) : 0 );
|
|
|
|
printf("bit : 0x%x \n", bit);
|
|
|
|
digi[boardID]->WriteRegister(Register::DPP::ReadoutControl, bit );
|
|
}
|
|
|
|
void BoardSetting::ReadData(){
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
uint32_t temp = digi[boardID]->GetSettingFromMemory(Register::DPP::ReadoutStatus_R);
|
|
if( (temp & 0x1) == 0 ) {
|
|
printf("No data. \n");
|
|
return;
|
|
}
|
|
|
|
Data * data = digi[boardID]->GetData();
|
|
data->AllocateMemory();
|
|
data->DPPType = digi[boardID]->GetDPPType();
|
|
|
|
digi[boardID]->ReadData();
|
|
|
|
//data->PrintBuffer();
|
|
data->DecodeBuffer(2);
|
|
|
|
data->PrintStat();
|
|
|
|
//Fill Histogram
|
|
|
|
data->ClearData();
|
|
|
|
ReadStatus();
|
|
|
|
}
|
|
|
|
void BoardSetting::ProgramDefaultBoard(){
|
|
printf("=== %s\n", __func__);
|
|
if( digi == NULL ) return;
|
|
int boardID = boardIDEntry->GetNumber();
|
|
|
|
if( digi[boardID]->GetDPPType() == V1730_DPP_PSD_CODE ){
|
|
digi[boardID]->ProgramBoard();
|
|
}
|
|
if( digi[boardID]->GetDPPType() == V1730_DPP_PHA_CODE ){
|
|
digi[boardID]->ProgramPHABoard();
|
|
}
|
|
|
|
ChangeBoard();
|
|
}
|
|
|
|
void BoardSetting::ProgramBoardFromFile(){
|
|
const char *filetypes[] = { "Setting File", "*.bin",
|
|
"ROOT files", "*.root",
|
|
"ROOT macros", "*.C",
|
|
"Text files", "*.[tT][xX][tT]",
|
|
0, 0 };
|
|
|
|
static TString dir(".");
|
|
TGFileInfo fi;
|
|
fi.fFileTypes = filetypes;
|
|
fi.SetIniDir(dir);
|
|
printf("fIniDir = %s\n", fi.fIniDir);
|
|
new TGFileDialog(gClient->GetRoot(), fMain, kFDOpen, &fi);
|
|
printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
|
|
dir = fi.fIniDir;
|
|
|
|
if( fi.fFilename == NULL) return;
|
|
|
|
txtSettingFile->SetText(fi.fFilename);
|
|
|
|
if( digi == NULL ) {
|
|
|
|
}else{
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->LoadSettingBinary( fi.fFilename );
|
|
|
|
ChangeBoard();
|
|
}
|
|
|
|
}
|
|
|
|
void BoardSetting::SaveSettingFile(){
|
|
|
|
const char *filetypes[] = { "Setting File", "*.bin",
|
|
0, 0};
|
|
|
|
static TString dir(".");
|
|
TGFileInfo fi;
|
|
fi.fFileTypes = filetypes;
|
|
fi.SetIniDir(dir);
|
|
printf("fIniDir = %s\n", fi.fIniDir);
|
|
new TGFileDialog(gClient->GetRoot(), fMain, kFDSave, &fi);
|
|
printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
|
|
dir = fi.fIniDir;
|
|
|
|
if( fi.fFilename == NULL) return;
|
|
|
|
txtSettingFile->SetText(fi.fFilename);
|
|
|
|
if( digi == NULL ) {
|
|
|
|
}else{
|
|
|
|
int boardID = boardIDEntry->GetNumber();
|
|
digi[boardID]->CreateAndSaveSettingToFile( fi.fFilename );
|
|
|
|
}
|
|
|
|
}
|