FSUDAQ_Qt6/README.md
2023-05-25 14:20:55 -04:00

37 lines
835 B
Markdown

# Introduction
This is a DAQ for 1st gen CAEN digitizer for V1725, V17255S, V1230 with PHA and PSD firmware.
It has scope (updated every half-sec), allow full control of the digitizer (except LVDS), and allow saving waevform.
It can be connected to InfluxDB v1.8 and Elog.
# Required / Development enviroment
Ubuntu 22.04
CAENVMELib_v3.3
CAENCOmm_v1.5.3
CAENDigitizer_v2.17.1
`sudo apt install qt6-base-dev libcurl4-openssl-dev libqt6charts6-dev elog`
The elog installed using apt is 3.1.3. If a higher version is needed. Please go to https://elog.psi.ch/elog/
The libcurl4 is need for pushing data to InfluxDB v1.8
# Compile
use `qmake6 -project ` to generate the *.pro
in the *.pro, add
` QT += core widgets charts`
` LIBS += -lCAENDigitizer -lcurl`
then run ` qmake6 *.pro` it will generate Makefile
then ` make`