41 lines
995 B
Markdown
41 lines
995 B
Markdown
# Introduction
|
|
|
|
This is a DAQ for 1st gen CAEN digitizer for V1725, V17255S, V1230 with PHA and PSD firmware.
|
|
|
|
It has scope (updated every half-sec), allow full control of the digitizer (except LVDS), and allow saving waevform.
|
|
|
|
It can be connected to InfluxDB v1.8 and Elog.
|
|
|
|
# Required / Development enviroment
|
|
|
|
Ubuntu 22.04
|
|
|
|
CAENVMELib_v3.3
|
|
|
|
CAENCOmm_v1.5.3
|
|
|
|
CAENDigitizer_v2.17.1
|
|
|
|
CAEN A3818 Driver
|
|
|
|
`sudo apt install qt6-base-dev libcurl4-openssl-dev libqt6charts6-dev qt6-webengine-dev elog`
|
|
|
|
The elog installed using apt is 3.1.3. If a higher version is needed. Please go to https://elog.psi.ch/elog/
|
|
|
|
The libcurl4 is need for pushing data to InfluxDB v1.8
|
|
|
|
The QCustomPlot (https://www.qcustomplot.com/index.php/introduction) source files are already included in the repository.
|
|
|
|
# Compile
|
|
|
|
use `qmake6 -project ` to generate the *.pro
|
|
|
|
in the *.pro, add
|
|
|
|
` QT += core widgets charts`
|
|
|
|
` LIBS += -lCAENDigitizer -lcurl`
|
|
|
|
then run ` qmake6 *.pro` it will generate Makefile
|
|
|
|
then ` make` |