FSUDAQ/ClassDigitizer.cpp

#include "ClassDigitizer.h"

Digitizer::Digitizer(){
  Initalization();
}

Digitizer::Digitizer(int boardID, int portID, bool program,  bool verbose){
  Initalization();
  OpenDigitizer(boardID, portID, program, verbose);
}

Digitizer::~Digitizer(){
  delete data;
  delete settingFile;
  CloseDigitizer();
}

void Digitizer::Initalization(){
  
  portID = -1;
  boardID = -1;
  handle = -1;
  NChannel = 0;
  ADCbits  = 1;
  DPPType = 0;
  DPPTypeStr = "";
  ADCFullSize = 0;
  ch2ns = 0; 
  BoardInfo = {};

  VMEBaseAddress = 0;
  LinkType = CAEN_DGTZ_USB;      /// default USB
  IOlev = CAEN_DGTZ_IOLevel_NIM; ///default NIM  
  AcqMode  = CAEN_DGTZ_DPP_ACQ_MODE_List; ///default list mode 
  
  channelMask = 0xFFFF;
  
  data = new Data();

  isSettingFilledinMemeory = false;
  
  settingFileName = "";
  settingFileExist = false;
  settingFile = NULL;
  
  ret = -1;
  isConnected = false; 
  AcqRun = false;
  
}

void Digitizer::Reset(){
  ret = CAEN_DGTZ_Reset(handle);
  if( ret != 0 ) ErrorMsg(__func__);
  
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::SoftwareClear_W, 1);
  if( ret != 0 ) ErrorMsg("Reset-SoftwareClear_W");

}

void Digitizer::PrintBoard(){
  printf("Connected to Model %s with handle %d using %s\n", BoardInfo.ModelName, handle, LinkType == CAEN_DGTZ_USB ? "USB" : "Optical Link");
  printf("Sampling rate : %.0f MHz = %.1f ns \n", 1000/ch2ns, ch2ns);
  printf("Number of Channels : %d = 0x%X\n", NChannel, channelMask);
  printf("SerialNumber :\e[1m\e[33m %d\e[0m\n", BoardInfo.SerialNumber);
  printf("DPPType : %d (%s)\n", DPPType, DPPTypeStr.c_str());
  printf("ADC bit is \e[33m%d\e[0m, %d = 0x%X\n", ADCbits, ADCFullSize, ADCFullSize);
  printf("ROC FPGA Release is %s\n", BoardInfo.ROC_FirmwareRel);
  printf("AMC FPGA Release is %s\n", BoardInfo.AMC_FirmwareRel);
}

int Digitizer::OpenDigitizer(int boardID, int portID, bool program, bool verbose){
  
  this->boardID = boardID;
  this->portID = portID;
    
  /***************************************************/
  /** Open the digitizer and read board information  */
  /***************************************************/

  if( verbose) printf("============= Opening Digitizer at Board %d, Port %d \n", boardID, portID);
  
  ///-------- try USB first
  LinkType = CAEN_DGTZ_USB;     /// Link Type
  ret = (int) CAEN_DGTZ_OpenDigitizer(LinkType, boardID, 0, VMEBaseAddress, &handle);
  if (ret != 0){ ///---------- try Optical link
    LinkType = CAEN_DGTZ_OpticalLink ; 
    ret = (int) CAEN_DGTZ_OpenDigitizer(LinkType, portID, boardID, VMEBaseAddress, &handle);
  }
  
  if (ret != 0) {
    if( verbose) printf("Can't open digitizer\n");
    return -1;
  }else{
    ///----- Getting Board Info
    ret = (int) CAEN_DGTZ_GetInfo(handle, &BoardInfo);
    if (ret != 0) {
      if( verbose) printf("Can't read board info\n");
    }else{
      isConnected = true;
      NChannel = BoardInfo.Channels;
      channelMask = pow(2, NChannel)-1;
      switch(BoardInfo.Model){
            case CAEN_DGTZ_V1730: ch2ns = 2.0; break; ///ns -> 500 MSamples/s
            case CAEN_DGTZ_V1725: ch2ns = 4.0; break; ///ns -> 250 MSamples/s
      }
      data->ch2ns = ch2ns;
      
      ADCbits = BoardInfo.ADC_NBits;
      ADCFullSize = (unsigned int)( pow(2, ADCbits) -1 );
      
      //SetBoardID(BoardInfo.SerialNumber);
      
    }
  }

  ///====================== Check DPP firmware revision 
  
  sscanf(BoardInfo.AMC_FirmwareRel, "%d", &DPPType);
  data->DPPType = DPPType;
  switch (DPPType){
    case V1724_DPP_PHA_CODE: DPPTypeStr = "DPP-PHA x724"; break; /// 0x80
    case V1720_DPP_CI_CODE : DPPTypeStr = "DPP-CI  x720"; break; /// 0x82
    case V1720_DPP_PSD_CODE: DPPTypeStr = "DPP-PSD x720"; break; /// 0x83
    case V1751_DPP_PSD_CODE: DPPTypeStr = "DPP-PSD x751"; break; /// 0x84
    case V1751_DPP_ZLE_CODE: DPPTypeStr = "DPP-ZLE x751"; break; /// 0x85
    case V1743_DPP_CI_CODE:  DPPTypeStr = "DPP-PSD x743"; break; /// 0x86
    case V1740_DPP_QDC_CODE: DPPTypeStr = "DPP-QDC x740"; break; /// 0x87
    case V1730_DPP_PSD_CODE: DPPTypeStr = "DPP-PSD x730"; break; /// 0x88
    case V1730_DPP_PHA_CODE: DPPTypeStr = "DPP-PHA x730"; break; /// 0x8B
    case V1730_DPP_ZLE_CODE: DPPTypeStr = "DPP-ZLE x730"; break; /// 0x8C
    case V1730_DPP_DAW_CODE: DPPTypeStr = "DPP-DAW x730"; break; /// 0x8D
  }
  if ( verbose ){
    PrintBoard();    
    if (DPPType < 0x80 ) {
      printf("This digitizer does not have DPP-PHA firmware\n");
    }else {
      printf("\t==== This digitizer has a DPP firmware!\n");    
      printf("\e[32m\t %s \e[0m", DPPTypeStr.c_str());
    }
  }
  
  ///======================= Check virtual probe
  int probes[MAX_SUPPORTED_PROBES];
  int numProbes;
  ret = CAEN_DGTZ_GetDPP_SupportedVirtualProbes(handle, 1, probes, &numProbes);
  if( verbose ){
    printf("\t==== supported virtual probe (number of Probe : %d)\n", numProbes);
    for( int i = 0 ; i < numProbes; i++){
      switch (probes[i]){
         case  0: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Input\n"); break;
         case  1: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Delta\n"); break;
         case  2: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Delta2\n"); break;
         case  3: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Trapezoid\n"); break;
         case  4: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_TrapezoidReduced\n"); break;
         case  5: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Baseline\n"); break;
         case  6: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_Threshold\n"); break;
         case  7: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_CFD\n"); break;
         case  8: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_SmoothedInput\n"); break;
         case  9: printf("\t\t CAEN_DGTZ_DPP_VIRTUALPROBE_None\n"); break;
         case 10: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_TRGWin\n"); break;
         case 11: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Armed\n"); break;
         case 12: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_PkRun\n"); break;
         case 13: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Peaking\n"); break;
         case 14: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_CoincWin\n"); break;
         case 15: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_BLHoldoff\n"); break;
         case 16: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_TRGHoldoff\n"); break;
         case 17: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_TRGVal\n"); break;
         case 18: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_ACQVeto\n"); break;
         case 19: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_BFMVeto\n"); break;
         case 20: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_ExtTRG\n"); break;
         case 21: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_OverThr\n"); break;
         case 22: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_TRGOut\n"); break;
         case 23: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Coincidence \n"); break;
         case 24: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_PileUp \n"); break;
         case 25: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Gate \n");  break;
         case 26: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_GateShort \n"); break;
         case 27: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Trigger \n"); break;
         case 28: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_None  \n"); break;
         case 29: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_BLFreeze  \n"); break;
         case 30: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_Busy  \n"); break;
         case 31: printf("\t\t CAEN_DGTZ_DPP_DIGITALPROBE_PrgVeto \n"); break;
      }  
    }
  }
  
  ErrorMsg("end of OpenDigitizer");
  
  if( isConnected  && program) {
    ProgramBoard();
  }
  
  if( isConnected ) FillAllSettings();

  return ret;
}

int Digitizer::CloseDigitizer(){

  if( !isConnected ) return 0;
  isConnected = false;
  printf("-------- Closing Digtizer Board : %d Port : %d \n", boardID, portID);
  printf("  Model %s with handle %d using %s\n", BoardInfo.ModelName, handle, LinkType == CAEN_DGTZ_USB ? "USB" : "Optical Link");
  ret  = CAEN_DGTZ_SWStopAcquisition(handle);
  ret |= CAEN_DGTZ_CloseDigitizer(handle);
  
  return ret;
}

void Digitizer::ErrorMsg(string header){
  switch (ret){
    ///case CAEN_DGTZ_Success                 : /**   0 */ printf("%s | Operation completed successfully.\n", header.c_str()); break;
    case CAEN_DGTZ_CommError               : /**  -1 */ printf("%s | Communication Error.\n", header.c_str()); break;
    case CAEN_DGTZ_GenericError            : /**  -2 */ printf("%s | Unspecified error.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidParam            : /**  -3 */ printf("%s | Invalid parameter.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidLinkType         : /**  -4 */ printf("%s | Invalid Link Type.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidHandle           : /**  -5 */ printf("%s | Invalid device handler.\n", header.c_str()); break;
    case CAEN_DGTZ_MaxDevicesError         : /**  -6 */ printf("%s | Maximum number of devices exceeded.\n", header.c_str()); break;
    case CAEN_DGTZ_BadBoardType            : /**  -7 */ printf("%s | Operation not allowed on this type of board.\n", header.c_str()); break;
    case CAEN_DGTZ_BadInterruptLev         : /**  -8 */ printf("%s | The interrupt level is not allowed.\n", header.c_str()); break;
    case CAEN_DGTZ_BadEventNumber          : /**  -9 */ printf("%s | The event number is bad.\n", header.c_str()); break;
    case CAEN_DGTZ_ReadDeviceRegisterFail  : /** -10 */ printf("%s | Unable to read the registry.\n", header.c_str()); break;
    case CAEN_DGTZ_WriteDeviceRegisterFail : /** -11 */ printf("%s | Unable to write the registry.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidChannelNumber    : /** -13 */ printf("%s | The channel number is invalid.\n", header.c_str()); break;
    case CAEN_DGTZ_ChannelBusy             : /** -14 */ printf("%s | The channel is busy.\n", header.c_str()); break;
    case CAEN_DGTZ_FPIOModeInvalid         : /** -15 */ printf("%s | Invalid FPIO mode.\n", header.c_str()); break;
    case CAEN_DGTZ_WrongAcqMode            : /** -16 */ printf("%s | Wrong Acquistion mode.\n", header.c_str()); break;
    case CAEN_DGTZ_FunctionNotAllowed      : /** -17 */ printf("%s | This function is not allowed on this module.\n", header.c_str()); break;
    case CAEN_DGTZ_Timeout                 : /** -18 */ printf("%s | Communication Timeout.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidBuffer           : /** -19 */ printf("%s | The buffer is invalid.\n", header.c_str()); break;
    case CAEN_DGTZ_EventNotFound           : /** -20 */ printf("%s | The event is not found.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidEvent            : /** -21 */ printf("%s | The event is invalid.\n", header.c_str()); break;
    case CAEN_DGTZ_OutOfMemory             : /** -22 */ printf("%s | Out of memory.\n", header.c_str()); break;
    case CAEN_DGTZ_CalibrationError        : /** -23 */ printf("%s | Unable to calibrate the board.\n", header.c_str()); break;
    case CAEN_DGTZ_DigitizerNotFound       : /** -24 */ printf("%s | Unbale to open the digitizer.\n", header.c_str()); break;
    case CAEN_DGTZ_DigitizerAlreadyOpen    : /** -25 */ printf("%s | The digitizer is already open.\n", header.c_str()); break;
    case CAEN_DGTZ_DigitizerNotReady       : /** -26 */ printf("%s | The digitizer is not ready.\n", header.c_str()); break;
    case CAEN_DGTZ_InterruptNotConfigured  : /** -27 */ printf("%s | The digitizer has no IRQ configured.\n", header.c_str()); break;
    case CAEN_DGTZ_DigitizerMemoryCorrupted: /** -28 */ printf("%s | The digitizer flash memory is corrupted.\n", header.c_str()); break;
    case CAEN_DGTZ_DPPFirmwareNotSupported : /** -29 */ printf("%s | The digitier DPP firmware is not supported in this lib version.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidLicense          : /** -30 */ printf("%s | Invalid firmware licence.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidDigitizerStatus  : /** -31 */ printf("%s | The digitizer is found in a corrupted status.\n", header.c_str()); break;
    case CAEN_DGTZ_UnsupportedTrace        : /** -32 */ printf("%s | The given trace is not supported.\n", header.c_str()); break;
    case CAEN_DGTZ_InvalidProbe            : /** -33 */ printf("%s | The given probe is not supported.\n", header.c_str()); break;
    case CAEN_DGTZ_UnsupportedBaseAddress  : /** -34 */ printf("%s | The base address is not supported.\n", header.c_str()); break;
    case CAEN_DGTZ_NotYetImplemented       : /** -99 */ printf("%s | The function is not yet implemented.\n", header.c_str()); break;
  }
  
}

int Digitizer::ProgramBoard(){
  
  printf("----- program Board\n");
  ret = CAEN_DGTZ_Reset(handle);
  if (ret) {
    printf("ERROR: can't reset the digitizer.\n");
    return -1;
  }
  
  /// Board Configuration without PHA or PSD fireware
  ///bx0000 0000 0000 0000 0000 0000 0001 0000  = 
  ///                                 |   | +- (1) trigger overlap not allowed
  ///                                 |   +- (3) test pattern disable  
  ///                                 + (6) Self-trigger polarity, 1 = negative, 0 = Positive
  ret = CAEN_DGTZ_WriteRegister(handle,  (uint32_t) Register::BoardConfiguration , 0x000E0114);  /// Channel Control Reg (indiv trg, seq readout) ??
  
  /// Set the I/O level (CAEN_DGTZ_IOLevel_NIM or CAEN_DGTZ_IOLevel_TTL)
  ret |= CAEN_DGTZ_SetIOLevel(handle, IOlev);

  /// Set the enabled channels
  ret |= CAEN_DGTZ_SetChannelEnableMask(handle, channelMask);

  /// Set the number of samples for each waveform
  SetRecordLength(2000); /// ns
  
  /// Set Extras 2 to enable, this override Accusition mode, focring list mode
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::BoardConfiguration , 0x00E8114 );
  
  /// Set the digitizer acquisition mode (CAEN_DGTZ_SW_CONTROLLED or CAEN_DGTZ_S_IN_CONTROLLED)
  ret |= CAEN_DGTZ_SetAcquisitionMode(handle, CAEN_DGTZ_SW_CONTROLLED); /// software command
  ret |= CAEN_DGTZ_SetDPPAcquisitionMode(handle, AcqMode, CAEN_DGTZ_DPP_SAVE_PARAM_EnergyAndTime);

  /** Set the digitizer's behaviour when an external trigger arrives:
  CAEN_DGTZ_TRGMODE_DISABLED: do nothing
  CAEN_DGTZ_TRGMODE_EXTOUT_ONLY: generate the Trigger Output signal
  CAEN_DGTZ_TRGMODE_ACQ_ONLY = generate acquisition trigger
  CAEN_DGTZ_TRGMODE_ACQ_AND_EXTOUT = generate both Trigger Output and acquisition trigger
  see CAENDigitizer user manual, chapter "Trigger configuration" for details */
  //TODO set bit
  ret |= CAEN_DGTZ_SetExtTriggerInputMode(handle, CAEN_DGTZ_TRGMODE_ACQ_ONLY);

  ret |= CAEN_DGTZ_SetRunSynchronizationMode(handle, CAEN_DGTZ_RUN_SYNC_Disabled);  

  /// Set how many events to accumulate in the board memory before being available for readout
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::NumberEventsPerAggregate_G + 0x7000, 100);
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::AggregateOrganization, 0);
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::MaxAggregatePerBlockTransfer, 50);

  ErrorMsg(__func__);
  return ret;

}

//========================================================= ACQ control
void Digitizer::StartACQ(){
  if ( AcqRun ) return;
  ret = CAEN_DGTZ_SWStartAcquisition(handle);
  if( ret != 0 ) {
    ErrorMsg("Start ACQ");
    return;
  }
  printf("\e[1m\e[33m======= Acquisition Started for Board %d\e[0m\n", boardID);
  AcqRun = true;
}

void Digitizer::StopACQ(){
  if( !AcqRun ) return;
  int ret = CAEN_DGTZ_SWStopAcquisition(handle);
  ret |= CAEN_DGTZ_ClearData(handle);
  if( ret != 0 ) ErrorMsg("something wrong when try to stop ACQ and clear buffer");
  printf("\n\e[1m\e[33m====== Acquisition STOPPED for Board %d\e[0m\n", boardID);
  AcqRun = false;
}

unsigned int Digitizer::CalByteForBuffer(){
  
  //TODO
  unsigned int numAggBLT = ReadRegister(Register::DPP::MaxAggregatePerBlockTransfer);
  
  /// Channel Mask
  /// is takeing waveForm
  ///     Record Length
  
  return 0;
  
}

void Digitizer::ReadData(){
  if( !isConnected ) return;
  if( data->buffer == NULL ) {
    printf("need allocate memory for readout buffer\n");
    return;
  }
  
  ret = CAEN_DGTZ_ReadData(handle, CAEN_DGTZ_SLAVE_TERMINATED_READOUT_MBLT, data->buffer, &(data->nByte));
  //uint32_t EventSize = ReadRegister(Register::DPP::EventSize); // Is it as same as data->nByte?
  //printf("Read Buffer size %d byte, Event Size : %d byte \n", data->nByte, EventSize);
  
  if (ret || data->nByte == 0) {
    ErrorMsg(__func__);
    return;
  }
  
}

//===========================================================
void Digitizer::WriteRegister(uint32_t registerAddress, uint32_t value, int ch ){
  if( !isConnected ) return;
  ///printf("0x%X, 0x%X=%u, ch:%d\n", registerAddress, value, value, ch);
  
  if( registerAddress == 0x8180){
    if( ch < 0 ){
      for( int i = 0; i < NChannel/2; i++){
        ret = CAEN_DGTZ_WriteRegister(handle, registerAddress + 4*i, value);
        SaveSettingToFile(registerAddress, value, i);
      }
    }else{
      ret = CAEN_DGTZ_WriteRegister(handle, registerAddress + 4*(ch/2), value);
      SaveSettingToFile(registerAddress, value,  ch);      
    }
  }else if( registerAddress < 0x8000){
    if( ch < 0 ) {
      ret = CAEN_DGTZ_WriteRegister(handle, registerAddress + 0x7000, value);
      for( int i = 0; i < NChannel; i++)  SaveSettingToFile(value, registerAddress, i);
    }else{
      ret = CAEN_DGTZ_WriteRegister(handle, registerAddress +  (ch<<8), value);
      SaveSettingToFile(registerAddress,  value,  ch);
    }
  }else{
    ret = CAEN_DGTZ_WriteRegister(handle, registerAddress, value);
    SaveSettingToFile(registerAddress, value);
  }
  ErrorMsg("WriteRegister:" + std::to_string(registerAddress));
}

uint32_t Digitizer::ReadRegister(uint32_t registerAddress, int ch, string str ){
  if( !isConnected )  return 0;
  
  uint32_t actualAddress = registerAddress ;
  if( registerAddress == 0x8180 ){
    if( ch < 0 ) ch = 0;
    actualAddress = registerAddress + 4*(ch/2);
  }
  
  if( registerAddress < 0x8000) {
    if( ch >= 0 ) actualAddress = registerAddress + (ch << 8);
  }

  uint32_t data[1];
  ret = CAEN_DGTZ_ReadRegister(handle, actualAddress, data);
  
  SaveSettingToFile(registerAddress, data[0], ch);
  ErrorMsg("ReadRegister:" + std::to_string(registerAddress));
  if( str != "" ) printf("%s : 0x%04X(0x%04X) is 0x%08X \n", str.c_str(), actualAddress, registerAddress, data[0]);
  return data[0];

}

void Digitizer::SetChannelMask(uint32_t mask){
  if( !isConnected ) return;
  channelMask = mask;
  ret |= CAEN_DGTZ_SetChannelEnableMask(handle, channelMask);
  SaveSettingToFile(Register::DPP::ChannelEnableMask, mask);
  ErrorMsg(__func__);
}

void Digitizer::SetRecordLength(unsigned int ns, int ch){ 
  WriteRegister( Register::DPP::RecordLength_G,  ns / ch2ns / 8 , ch); 
  if( ch >= 0 ) WriteRegister( Register::DPP::RecordLength_G, ns / ch2ns / 8 , ch + int(pow(-1, ch)));     
  ErrorMsg(__func__); 
}

void Digitizer::SetAggregateOrganization(unsigned int bit){ 
  WriteRegister(Register::DPP::AggregateOrganization, bit & 0x7); 
  ErrorMsg(__func__);
}

  
void Digitizer::SetEventAggregation(unsigned int numEvent, int ch){ 
  WriteRegister( Register::DPP::NumberEventsPerAggregate_G,numEvent, ch); 
  if( ch >= 0 ) WriteRegister( Register::DPP::NumberEventsPerAggregate_G,numEvent, ch + int(pow(-1, ch))); 
  ErrorMsg(__func__); 
}

void Digitizer::SetMaxAggregatePerBlockTransfer(unsigned int numEvent){
  WriteRegister( Register::DPP::MaxAggregatePerBlockTransfer,numEvent);
  ErrorMsg(__func__);
}


void Digitizer::SetACQControl(uint32_t bit){
  WriteRegister( Register::DPP::AcquisitionControl, bit);
  ErrorMsg(__func__);
}

void Digitizer::SetGlobalTriggerMask(uint32_t bit){
  WriteRegister( Register::DPP::GlobalTriggerMask, bit);
  ErrorMsg(__func__);  
}

void Digitizer::SetFrontPanelTRGOUTMask(uint32_t bit){
  WriteRegister( Register::DPP::FrontPanelTRGOUTEnableMask, bit);
  ErrorMsg(__func__);  
}

void Digitizer::SetFrontPanelIOControl(uint32_t bit){
  WriteRegister( Register::DPP::FrontPanelIOControl, bit);
  ErrorMsg(__func__);  
}

void Digitizer::SetTriggerValidationMask(uint32_t bit){
  WriteRegister( Register::DPP::TriggerValidationMask_G, bit);
  ErrorMsg(__func__);  
}

void Digitizer::SetInputDynamicRange(unsigned int TwoVol_0_or_halfVol_1, int ch){ WriteRegister( Register::DPP::InputDynamicRange, TwoVol_0_or_halfVol_1, ch); ErrorMsg(__func__);}
void Digitizer::SetPreTriggerSample(unsigned int nSample, int ch)               { WriteRegister( Register::DPP::PreTrigger,             nSample / 4, ch);      ErrorMsg(__func__);}
void Digitizer::SetPreTriggerDuration(unsigned int ns, int ch)                  { WriteRegister( Register::DPP::PreTrigger,          ns / ch2ns / 4, ch);      ErrorMsg(__func__);}
void Digitizer::SetDCOffset(float offsetPrecentage, int ch)                     { WriteRegister( Register::DPP::ChannelDCOffset, uint( 0xFFFF * (1.0-offsetPrecentage)), ch ); ErrorMsg(__func__);}
void Digitizer::SetVetoWidth(uint32_t bit, int ch)                              { WriteRegister( Register::DPP::VetoWidth,                      bit, ch);      ErrorMsg(__func__);}

void Digitizer::SetTriggerPolarity(bool RiseingIsZero, int ch ){
  if( !isConnected ) return;
  if ( DPPType >= 128 ) return; /// do thing for DPP firmware
  if( ch < 0 ) {
    ret = 0;
    for (int i = 0; i < NChannel; i++){
      ret |= CAEN_DGTZ_SetTriggerPolarity(handle, i, CAEN_DGTZ_TriggerPolarity_t(RiseingIsZero));  
    }
  }else{
    ret = CAEN_DGTZ_SetTriggerPolarity(handle, ch, CAEN_DGTZ_TriggerPolarity_t(RiseingIsZero));
  }
  if( ret != 0 ) ErrorMsg(__func__);
}


//============================== DPP-Alpgorthm Control 
void Digitizer::SetDPPAlgorithmControl(uint32_t bit, int ch){
  ///============= DPP algorithm control is 32 bit 
  ///   [ 0: 5] Trapazoid Rescaling. the trapazoid ADC is 48 bit. it need to bit-shift before the 0x3FFF (14 bit filter)
  ///   [ 8: 9] Decimation. 00 = disable, 01 = 2 samples, 10 = 4 samples, 11 = 8 sample
  ///   [10:11] Decimation Gain. This gain apply to the Trapazoid Rescaling and fine gain
  ///   [12:13] Peak Mean. sample for averaging the trapezoid height calculation. 00 = 1 sample, 01 = 4 samples, 10 = 16 sample, 11 = 64 sample
  ///   [16]    pulse polarity. 0 = positve, 1 = negative
  ///   [18:19] Trigger mode. 00 = normal, 01 = coincident, 10 = reserved. 11 = anti coincident
  ///   [20:22] number of samples for the baseline average calculation. 000 = baseline disable (energy not subtraced with baseline)
  ///                                                                   001 =    16 samples  
  ///                                                                   010 =    64 samples  
  ///                                                                   011 =   256 samples  
  ///                                                                   100 =  1024 samples  
  ///                                                                   101 =  4096 samples  
  ///                                                                   110 = 16384 samples  
  ///                                                                   111 = resertved.
  ///    [24]    Disable self trigger. 0 = self‐trigger used to acquire and propagated to the trigger logic;
  ///                                  1 = self‐trigger only propagated to the trigger logic.
  ///    [26]    Enable Roll-Over flag. see manual 0 = disable, 1 = enable
  ///    [27]    Enable pile-up flag.
  
  ///============= PHA - DPP algorithm control 2 is 32 bit 
  ///   [ 0: 1] Local Shaped Trigger mode. see manual
  ///   [ 2]    Enable Local Shaped Trigger
  ///   [ 4: 5] Local Trigger Validation mode, see manual
  ///   [ 6]    Enable Local Trigger Validation
  ///   [ 8:10] Extra 2 word option. 000 = [0:15] baseline *4 [16:31] extended time stamp
  ///                                001 = reserved
  ///                                010 = [0:15] fine time stamp [16:31] extended time stamp
  ///                                011 = reserved
  ///                                100 = [0:15] total tigger counter [16:31] Lost trigger counter
  ///                                101 = [0:15] event after the zero crosiing [16:31] event before zero crossing
  ///                                110, 111 = reserved.
  ///   [14:15] source of veto. 00 = disable, 01 veto is common to all channels, 10 = veto for coupled channels, 11 = veto comes from negative saturation
  ///   [16:17] Select the step for the trigger counter rate flag. see manual
  ///   [18]    baseline calculation is active also when the acquisition is not running. 0 = disbale, 1 = enable
  ///   [19]    Tag correlated events. see manual  0 = disbale, 1 = enable
  ///   [29]    Enable the optimization of the Baseline Restorer to avoid tails in the energy peaks.  0 = disbale, 1 = enable
  
  WriteRegister( Register::DPP::DPPAlgorithmControl, bit, ch);    
  if( ret != 0 ) ErrorMsg(__func__);
}

unsigned int Digitizer::ReadBits(uint32_t address, unsigned int bitLength, unsigned int bitSmallestPos, int ch ){
  int tempCh = ch;
  if (ch < 0 && address < 0x8000 ) tempCh = 0; /// take ch-0 
  uint32_t bit = ReadRegister(address, tempCh);
  bit = (bit >> bitSmallestPos ) & uint(pow(2, bitLength)-1);
  return bit;
}

void Digitizer::SetBits(uint32_t address, unsigned int bitValue, unsigned int bitLength, unsigned int bitSmallestPos, int ch){
  ///printf("address : 0x%X, value : 0x%X, len : %d, pos : %d, ch : %d \n", address, bitValue, bitLength, bitSmallestPos, ch);
  uint32_t bit ;
  uint32_t bitmask = (uint(pow(2, bitLength)-1) << bitSmallestPos);  
  int tempCh = ch;
  if (ch < 0 && address < 0x8000 ) tempCh = 0; /// take ch-0 
  bit = ReadRegister(address, tempCh);
  ///printf("bit : 0x%X, bitmask : 0x%X \n", bit, bitmask);
  bit = (bit & ~bitmask) | (bitValue << bitSmallestPos);
  ///printf("bit : 0x%X, ch : %d \n", bit, ch);
  WriteRegister(address, bit, ch);
  if( ret != 0 ) ErrorMsg(__func__);  
}

int Digitizer::GetChTemperature(int ch){
  if( !isConnected ) return -404;
  if( BoardInfo.Model != CAEN_DGTZ_V1730 &&
      BoardInfo.Model != CAEN_DGTZ_V1725 &&
      BoardInfo.Model != CAEN_DGTZ_V1751 ) return -404;
  
  uint32_t * temp;
  ret |= CAEN_DGTZ_ReadTemperature(handle, ch, temp);
  if( ret != 0 ) ErrorMsg(__func__);
  return temp[0];
}

uint32_t Digitizer::PrintRegister(uint32_t address, std::string msg){
  if( !isConnected ) return 0 ;
  printf("\e[33m----------------------------------------------------\n");
  printf("------------ %s = 0x%X \n", msg.c_str(), address);
  printf("----------------------------------------------------\e[0m\n");

  uint32_t * value = new uint32_t[1];
  CAEN_DGTZ_ReadRegister(handle, address, value);
  printf(" %*s    32  28  24  20  16  12   8   4   0\n", (int) msg.length(), "");
  printf(" %*s     |   |   |   |   |   |   |   |   |\n", (int) msg.length(), "");
  printf(" %*s", (int) msg.length(), "");
  cout <<    "  : 0b" << bitset<32>(value[0]) << endl;
  printf(" %*s  : 0x%X\n", (int) msg.length(), msg.c_str(), value[0]);
  
  return value[0];
  
}

void Digitizer::PrintACQStatue(){
  if( !isConnected ) return;
  unsigned int status = ReadRegister(Register::DPP::AcquisitionStatus_R);
  
  printf("=================== Print ACQ status \n");
  printf("  32  28  24  20  16  12   8   4   0\n");
  printf("   |   |   |   |   |   |   |   |   |\n");
  cout <<"  0b" << bitset<32>(status) << endl;
  printf(" Acq state    (0x%1X): %s \n", (status >>  2) & 0x1, ((status >>  2) & 0x1) == 0? "stopped" : "running");
  printf(" Event Ready  (0x%1X): %s \n", (status >>  3) & 0x1, ((status >>  3) & 0x1) == 0? "no event in buffer" : "event in buffer");
  printf(" Event Full   (0x%1X): %s \n", (status >>  4) & 0x1, ((status >>  4) & 0x1) == 0? "not full" : "full");
  printf(" Clock source (0x%1X): %s \n", (status >>  5) & 0x1, ((status >>  5) & 0x1) == 0? "internal" : "external");
  printf(" Board ready  (0x%1X): %s \n", (status >>  8) & 0x1, ((status >>  8) & 0x1) == 0? "not ready" : "ready");
  printf(" Ch shutDown  (0x%1X): %s \n", (status >> 19) & 0x1, ((status >> 19) & 0x1) == 0? "Channels are on" : "channels are shutdown");
  printf(" TRG-IN           0x%1X \n", (status >> 16) & 0x1);
  printf(" Ch temp state    0x%04X \n", (status >> 20) & 0xF);
  
}

//=====================================================

int Digitizer::ProgramPHABoard(){
  
  ret = CAEN_DGTZ_Reset(handle);
  printf("======== program board PHA\n");

  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::RecordLength_G + 0x7000, 250);  
  ret = CAEN_DGTZ_WriteRegister(handle, Register::DPP::BoardConfiguration, 0x0F8115);  
  
  //TODO change to write register
  ret = CAEN_DGTZ_SetAcquisitionMode(handle, CAEN_DGTZ_SW_CONTROLLED); /// software command
  ret |= CAEN_DGTZ_SetIOLevel(handle, CAEN_DGTZ_IOLevel_NIM);
  ret |= CAEN_DGTZ_SetExtTriggerInputMode(handle, CAEN_DGTZ_TRGMODE_ACQ_ONLY);

  ret = CAEN_DGTZ_SetChannelEnableMask(handle, 0xFFFF);
  
  //ret = CAEN_DGTZ_SetNumEventsPerAggregate(handle, 0);
  
  ret = CAEN_DGTZ_SetRunSynchronizationMode(handle, CAEN_DGTZ_RUN_SYNC_Disabled);
  if( ret != 0 ) { printf("==== set board error.\n"); return 0;}

  printf("======== program Channels PHA\n");
  
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::DecayTime + 0x7000 , 5000 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::TrapezoidFlatTop + 0x7000 , 0x62 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::TrapezoidRiseTime + 0x7000 , 6 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::PeakingTime + 0x7000 , 6 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::RCCR2SmoothingFactor + 0x7000 , 4 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::InputRiseTime + 0x7000 , 6 ); 
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::TriggerThreshold + 0x7000 , 1000 );
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::PeakHoldOff + 0x7000 , 0x3E );
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::TriggerHoldOffWidth + 0x7000 , 0x3E );
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PHA::RiseTimeValidationWindow + 0x7000 , 0x0 );
  
    
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::ChannelDCOffset + 0x7000 , 0xEEEE );
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::PreTrigger + 0x7000 , 124 );
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::InputDynamicRange + 0x7000 , 0x0 );
  
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::NumberEventsPerAggregate_G + 0x7000, 100);
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::AggregateOrganization, 0);
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::MaxAggregatePerBlockTransfer, 40);
  ret |= CAEN_DGTZ_WriteRegister(handle, Register::DPP::DPPAlgorithmControl + 0x7000, 0xe30200f);
  
  if( ret != 0 ) { printf("==== set channels error.\n"); return 0;}
  
  printf("End of program board and channels\n");
  
  return ret;
}

//========================================== setting file IO
unsigned short Digitizer::CalSettingIndex(uint32_t registerAddress, int ch){
  
  unsigned short index;
  uint32_t newAddress;
  
  if( registerAddress == 0x8180){
    ///if( ch%2 ==1 ) return 0xFFFF;
    newAddress = registerAddress + 4*(ch/2);
    index = (newAddress & 0x0FFF) / 4; 
  }else if( registerAddress < 0x8000){
    if( ch < 0 ) ch = 0;
    newAddress = registerAddress + (ch << 8);
    index = newAddress / 4;
  }else{
    newAddress = registerAddress;
    index = (newAddress & 0x0FFF) / 4; 
  }
  //printf("---------address : 0x%04X = %5d = index : %6.1f (%d)\n",  newAddress, newAddress, (newAddress & 0x0FFF) / 4., index);
  return index;
}

void Digitizer::FillSetting(uint32_t registerAddress, int ch){

  unsigned short index = CalSettingIndex(registerAddress, ch);
  if( index > SETTINGSIZE ) return;
  //if( setting[index] != 0 ) printf("##############################\n");
  setting[index] = ReadRegister(registerAddress, ch); 
}

void Digitizer::SetSettingToMemory(uint32_t registerAddress,  unsigned int value, int ch ){
  unsigned short index = CalSettingIndex(registerAddress, ch);
  if( index > SETTINGSIZE ) return;
  setting[index] = value;
}

unsigned int Digitizer::GetSettingFromMemory(uint32_t registerAddress, int ch ){
  unsigned short index = CalSettingIndex(registerAddress, ch);
  if( index > SETTINGSIZE ) return 0xFFFF;
  return setting[index] ;
}

void Digitizer::FillAllSettings(){
  
  /// for 1 digitizer, 16 channels, needs  0x10XX to 0x1FXX 
  /// Board setting is        0x8000 --> 0x0000
  /// Saved date   YYYYMMDDHH        --> 0x0004
  /// Global Trigger Mask     0x810C --> 0x010C
  /// Channel mask            0x8120 --> 0x0120
  /// ROM Board version       0xF030 --> 0x0030
  /// Board Form factor       0xF034 --> 0x0034
  /// Board ID Byte 1         0xF038 --> 0x0038
  /// Board ID Byte 0         0xF03C --> 0x003C
  /// Board Serial Num Byte1  0xF080 --> 0x0080
  /// Board Serial Num Byte0  0xF084 --> 0x0084 /// serial number = byte0 << 8 + byte1
  /// ROC fireware version is 0x8124 --> 0x0124
  /// Board Info is           0x8140 --> 0x0140
  /// -------------------------------------
  /// for 1 channel is 0x2000 = 8192 byte should be enough for all setting for 1 board
  
  
  if( isSettingFilledinMemeory) return;
  
  for( int ch = 0; ch < NChannel; ch ++){
    
    FillSetting(Register::DPP::RecordLength_G              , ch); /// 0x1020; /// R/W
    FillSetting(Register::DPP::InputDynamicRange           , ch); /// 0x1028; /// R/W
    FillSetting(Register::DPP::NumberEventsPerAggregate_G  , ch); /// 0x1034; /// R/W
    FillSetting(Register::DPP::PreTrigger                  , ch); /// 0x1038; /// R/W
    FillSetting(Register::DPP::DPPAlgorithmControl         , ch); /// 0x1080; /// R/W 
    FillSetting(Register::DPP::ChannelStatus_R             , ch); /// 0x1088; /// R
    FillSetting(Register::DPP::AMCFirmwareRevision_R       , ch); /// 0x108C; /// R
    FillSetting(Register::DPP::ChannelDCOffset             , ch); /// 0x1098; /// R/W
    FillSetting(Register::DPP::ChannelADCTemperature_R     , ch); /// 0x10A8; /// R
    FillSetting(Register::DPP::VetoWidth                   , ch); /// 0x10D4; /// R/W
    
    if( DPPType == V1730_DPP_PHA_CODE ){
      FillSetting(Register::DPP::PHA::ChannelStopAcquisition  , ch); /// 0x1040; /// R/W   not sure
      FillSetting(Register::DPP::PHA::RCCR2SmoothingFactor    , ch); /// 0x1054; /// R/W   Trigger Filter smoothing, triggerSmoothingFactor
      FillSetting(Register::DPP::PHA::InputRiseTime           , ch); /// 0x1058; /// R/W   OK
      FillSetting(Register::DPP::PHA::TrapezoidRiseTime       , ch); /// 0x105C; /// R/W   OK
      FillSetting(Register::DPP::PHA::TrapezoidFlatTop        , ch); /// 0x1060; /// R/W   OK
      FillSetting(Register::DPP::PHA::PeakingTime             , ch); /// 0x1064; /// R/W   OK
      FillSetting(Register::DPP::PHA::DecayTime               , ch); /// 0x1068; /// R/W   OK
      FillSetting(Register::DPP::PHA::TriggerThreshold        , ch); /// 0x106C; /// R/W   OK
      FillSetting(Register::DPP::PHA::RiseTimeValidationWindow, ch); /// 0x1070; /// R/W   OK
      FillSetting(Register::DPP::PHA::TriggerHoldOffWidth     , ch); /// 0x1074; /// R/W   OK
      FillSetting(Register::DPP::PHA::PeakHoldOff             , ch); /// 0x1078; /// R/W   OK
      FillSetting(Register::DPP::PHA::ShapedTriggerWidth      , ch); /// 0x1084; /// R/W   not sure
      FillSetting(Register::DPP::PHA::DPPAlgorithmControl2_G  , ch); /// 0x10A0; /// R/W   OK
      FillSetting(Register::DPP::PHA::FineGain                , ch); /// 0x10C4; /// R/W   OK
    }
    
    if( DPPType == V1730_DPP_PSD_CODE ){
      FillSetting(Register::DPP::PSD::CFDSetting                    , ch); /// 0x103C; /// R/W
      FillSetting(Register::DPP::PSD::ChargeZeroSuppressionThreshold, ch); /// 0x1044; /// R/W
      FillSetting(Register::DPP::PSD::ShortGateWidth                , ch); /// 0x1054; /// R/W
      FillSetting(Register::DPP::PSD::LongGateWidth                 , ch); /// 0x1058; /// R/W
      FillSetting(Register::DPP::PSD::GateOffset                    , ch); /// 0x105C; /// R/W
      FillSetting(Register::DPP::PSD::TriggerThreshold              , ch); /// 0x1060; /// R/W
      FillSetting(Register::DPP::PSD::FixedBaseline                 , ch); /// 0x1064; /// R/W
      FillSetting(Register::DPP::PSD::TriggerLatency                , ch); /// 0x106C; /// R/W
      FillSetting(Register::DPP::PSD::ShapedTriggerWidth            , ch); /// 0x1070; /// R/W
      FillSetting(Register::DPP::PSD::TriggerHoldOffWidth           , ch); /// 0x1074; /// R/W
      FillSetting(Register::DPP::PSD::ThresholdForPSDCut            , ch); /// 0x1078; /// R/W
      FillSetting(Register::DPP::PSD::PurGapThreshold               , ch); /// 0x107C; /// R/W
      FillSetting(Register::DPP::PSD::DPPAlgorithmControl2_G        , ch); /// 0x1084; /// R/W 
      FillSetting(Register::DPP::PSD::EarlyBaselineFreeze           , ch); /// 0x10D8; /// R/W
    }
    
    FillSetting(Register::DPP::TriggerValidationMask_G, ch); /// 0x8180;  /// R/W,  0x8180 + 4n
  }
  
  FillSetting(Register::DPP::BoardConfiguration          ); /// 0x8000;  /// R/W
  FillSetting(Register::DPP::AggregateOrganization       ); /// 0x800C;  /// R/W
  FillSetting(Register::DPP::AcquisitionControl          ); /// 0x8100;  /// R/W
  FillSetting(Register::DPP::AcquisitionStatus_R         ); /// 0x8104;  /// R
  FillSetting(Register::DPP::GlobalTriggerMask           ); /// 0x810C;  /// R/W
  FillSetting(Register::DPP::FrontPanelTRGOUTEnableMask  ); /// 0x8110;  /// R/W
  FillSetting(Register::DPP::LVDSIOData                  ); /// 0x8118;  /// R/W
  FillSetting(Register::DPP::FrontPanelIOControl         ); /// 0x811C;  /// R/W
  FillSetting(Register::DPP::ChannelEnableMask           ); /// 0x8120;  /// R/W
  FillSetting(Register::DPP::ROCFPGAFirmwareRevision_R   ); /// 0x8124;  /// R
  FillSetting(Register::DPP::EventStored_R               ); /// 0x812C;  /// R
  FillSetting(Register::DPP::VoltageLevelModeConfig      ); /// 0x8138;  /// R/W
  FillSetting(Register::DPP::BoardInfo_R                 ); /// 0x8140;  /// R    /// [0:7] 0x0E = 725, 0x0B = 730, [8:15] 0x01 = 640 kSample, 0x08 = 5.12 MSample, [16:23] channel number
  FillSetting(Register::DPP::AnalogMonitorMode           ); /// 0x8144;  /// R/W
  FillSetting(Register::DPP::EventSize_R                 ); /// 0x814C;  /// R
  FillSetting(Register::DPP::TimeBombDowncounter_R       ); /// 0x8158;  /// R
  FillSetting(Register::DPP::FanSpeedControl             ); /// 0x8168;  /// R/W
  FillSetting(Register::DPP::RunStartStopDelay           ); /// 0x8170;  /// R/W
  FillSetting(Register::DPP::BoardFailureStatus_R        ); /// 0x8178;  /// R
  FillSetting(Register::DPP::DisableExternalTrigger      ); /// 0x817C;  /// R/W

  FillSetting(Register::DPP::FrontPanelLVDSIONewFeatures ); /// 0x81A0;  /// R/W
  FillSetting(Register::DPP::BufferOccupancyGain         ); /// 0x81B4;  /// R/W
  FillSetting(Register::DPP::ExtendedVetoDelay           ); /// 0x81C4;  /// R/W
  FillSetting(Register::DPP::ReadoutControl              ); /// 0xEF00;  /// R/W
  FillSetting(Register::DPP::ReadoutStatus_R             ); /// 0xEF04;  /// R
  FillSetting(Register::DPP::BoardID                     ); /// 0xEF08;  /// R/W  /// Geo address on VME crate
  FillSetting(Register::DPP::MCSTBaseAddressAndControl   ); /// 0xEF0C;  /// R/W
  FillSetting(Register::DPP::RelocationAddress           ); /// 0xEF10;  /// R/W
  FillSetting(Register::DPP::InterruptStatusID           ); /// 0xEF14;  /// R/W
  FillSetting(Register::DPP::InterruptEventNumber        ); /// 0xEF18;  /// R/W
  FillSetting(Register::DPP::MaxAggregatePerBlockTransfer); /// 0xEF1C;  /// R/W
  FillSetting(Register::DPP::Scratch                     ); /// 0xEF20;  /// R/W
    
  isSettingFilledinMemeory = true;
}

void Digitizer::PrintSettingFromMemory(){
  for( int i = 0; i < SETTINGSIZE; i++) printf("%4d | 0x%04X |0x%08X = %u \n", i, i*4, setting[i], setting[i]);
}

void Digitizer::OpenSettingBinary(string fileName){
  settingFile = NULL;
  this->settingFileName = fileName;
  settingFile = fopen(fileName.c_str(), "r+");
  if( settingFile == NULL ){
    printf("cannot open file %s. \n", fileName.c_str());
    CreateAndSaveSettingToFile(fileName);
  }else{
    settingFileExist = true;
    printf("setting file already exist.\n");
  }
}
    
void Digitizer::CreateAndSaveSettingToFile(string fileName){

  settingFileName = fileName;
  settingFile = fopen(settingFileName.c_str(), "w+");
  
  if( isSettingFilledinMemeory == false) FillAllSettings();  
  
  fwrite(setting, SETTINGSIZE * sizeof(unsigned int), 1, settingFile);
  
  fseek(settingFile, 0L, SEEK_END);
  unsigned int inFileSize = ftell(settingFile);
  printf("Created file : %s. file size : %d Byte\n", settingFileName.c_str(), inFileSize);
  fclose (settingFile);
  settingFileExist = true;
  
}


void Digitizer::LoadSettingBinary(string fileName){
  
  settingFileName = fileName;
  settingFile = fopen(settingFileName.c_str(), "r");
  
  if( settingFile == NULL ) {
    printf(" %s does not exist.\n", fileName.c_str());
    settingFileExist = false;
    return;
    
  }else{
    settingFileExist = true;
    size_t dummy = fread( setting, SETTINGSIZE * sizeof(unsigned int), 1, settingFile);
  }
}
    
unsigned int Digitizer::ReadSettingFromFile(uint32_t registerAddress, int ch){
  if ( !settingFileExist ) return -1;
  
  unsigned short index = CalSettingIndex(registerAddress, ch);
  
  settingFile = fopen (settingFileName.c_str(),"r");
  ///fseek( settingFile, address, SEEK_SET); 
  fseek( settingFile, index * 4, SEEK_SET); 
  ///printf(" at pos %lu Byte = index(%lu)\n", ftell(settingFile), ftell(settingFile)/4);
  unsigned int lala[1];
  size_t dummy = fread( lala, sizeof(unsigned int), 1, settingFile);
  ///printf(" data at pos %lu(%lu) : %X = %d\n", ftell(settingFile) - sizeof(unsigned int), (ftell(settingFile) - sizeof(unsigned int))/4, lala[0], lala[0]);
  fclose (settingFile);
  return lala[0];
   
}

void Digitizer::SaveSettingToFile(uint32_t registerAddress, unsigned int value, int ch){
  if ( !settingFileExist ) return ;
  
  unsigned short index = CalSettingIndex(registerAddress, ch);
  setting[index] = value;
  
  settingFile = fopen (settingFileName.c_str(),"r+");
  ///fseek( settingFile, address, SEEK_SET); 
  fseek( settingFile, index * 4, SEEK_SET); 
  unsigned int jaja[1] = {value};
  size_t dummy = fwrite( jaja, sizeof(unsigned int), 1, settingFile);
  ///printf("fwrite ret : %d, 0x%0X, 0x%0X, %d, 0x%X = %d\n", (int)dummy, registerAddress, index*4, index, jaja[0], jaja[0]);
  fclose (settingFile);
}