92 lines
3.1 KiB
Markdown
92 lines
3.1 KiB
Markdown
# Introduction
|
|
|
|
The FSUDAQ is a GUI, supports One (for now) CAEN x725 and x730 digitizer with either DPP-PHA or DPP-PSD firmware. It uses the CEAN ROOT for the Graphical Interface.
|
|
|
|
For other information, please see https://fsunuc.physics.fsu.edu/wiki/index.php/CAEN_digitizer#FSU_DAQ
|
|
|
|
## Required Library
|
|
|
|
1. CAENComm 1.4+
|
|
2. CAENVMELib 2.5+
|
|
3. CAENDigitizer 2.12+
|
|
4. CAEN A3818 Driver 1.61+ (for optical link)
|
|
5. CERN ROOT 6
|
|
|
|
## Folder Structure
|
|
|
|
FSUDAQ \
|
|
├── Analysis \
|
|
├── DAQ \
|
|
├── elogText.txt \
|
|
├── (Symbolic link to experiment folder) \
|
|
│ ├── data \
|
|
│ │ └── *.fsu \
|
|
│ ├── FSUDAQ.sh \
|
|
│ └── settings \
|
|
├── FSUDAQ \
|
|
├── FSUDAQDict_rdict.pcm -> DAQ/FSUDAQDict_rdict.pcm \
|
|
├── FSUDAQ.sh \
|
|
└── README.md
|
|
|
|
The parent folder FSUDAQ should be placed on the Home directory. The source code for the DAQ is inside the DAQ folder.
|
|
|
|
The key codes are :
|
|
|
|
1. ClassData.h
|
|
2. RegisterAddress.h
|
|
3. ClassDigitizer.h/cpp
|
|
|
|
The test.cpp is an example to use the above classes to control and readout digitizer.
|
|
|
|
The test_indep.cpp is an example to connect digitizer ONLY with CAEN library.
|
|
|
|
The rest of the files are for the GUI.
|
|
|
|
The Analysis folder stores all online analysis codes.
|
|
|
|
User should also make a symbolic link to the experiment folder.
|
|
|
|
The FSUDAQ.sh will be created when running the FSUDAQ for the 1st time. It stored the program settings.
|
|
|
|
## To Complie
|
|
|
|
Go to the DAQ folder:
|
|
|
|
> ~>cd FSUDAQ \
|
|
> FSUDAQ>cd DAQ \
|
|
> DAQ>make FSUDAQ
|
|
|
|
It will produce an executable FSUDAQ under the FSUDAQ, and FSUDAQDict_rdict.pcm.
|
|
|
|
# Usage
|
|
|
|
The FSUDAQ can be use as 2 ways. With digitizer open, run and take data, Without Digitizer open, open setting file and change it.
|
|
|
|
## Setup experiment folders
|
|
|
|
This can be done in 2 ways :
|
|
|
|
1. Using FSQDAQ. once the FSQDAQ run, it will create the FSUDAQ.sh if not exist. From the menu -> Settings -> Program Settings
|
|
2. Edit the FSUDAQ.sh
|
|
|
|
The data folder can be inside FSUDAQ folder or anywhere.
|
|
|
|
## Open digitizers
|
|
|
|
Simply press the "Open Digitizers" button from the FSUDAQ. It wll scan all 4 ports of the fiber optics cards and 3 boards for each port. User can modify the MaxNBoard and MaxNPort in the code and re-compile.
|
|
|
|
When a digitizer is found, connection will be established. And setting files will be created at the settings folder inside the experiment folder with filename setting_XXX.bin, where XXX is the board serial number. If setting file is found, the setting will be use and program the digitizer.
|
|
|
|
### After opened digitizer
|
|
|
|
Once at least one digitizer is connected. The Board Setting and Channel Setting are avalible.
|
|
|
|
1. plot a single trace
|
|
2. Continue run the digitizer without taking data. Can plot energy spectrum, count, or traces
|
|
3. Take data. This will only take data, fast scanning the data, and dump it to *.fsu file. Files size limit is 2 GB.
|
|
|
|
## Open *.bin setting file
|
|
|
|
If no digitizer is open, user can open a setting file. once the setting file is open, the Board setting and Channel setting panels will open. User can change the settings.
|
|
|
|
User can use the Save button at the board setting to save the setting file into text format. |