- wireOffset is now 4 not 3. Phew. Gosh Golly. Change in Armory/ClassPW.h
- Concomitant changes made to Armory/PC_Stepladder_Correction.h. In this particular version, a shift of 2 anodes in run*.sh has been replaced by an offset in z
- The above needs to be worked out carefully.
- The rho_vs_z fixes have NOT been corrected for. This version will likely yield nonsensical results, hence. To be fixed by a subsequent push that also cleans up the histogram plotting somewhat.
*Read again*
The sort uses rho from the 3 wireOffset cases in MakeVertex.C
The code assumes wireOffset=4.
Anywhere this matters, this version will break - caveat Emptor. Pushing here to plant a flag, but to also make sure the key changes are communicated across branches.
1) Environment variables allowing flip and offset of anode wires
2) Environment variables allowing for selection of runs' start and stop time positions, to help with phi scanning runs
3) *fix histograms defined that incorporate step-ladder corrections applied to pcz, hard-coded currently in sx3cal/sx3z_vs_pcz/testmodel.h. Will need a better home in the future
4) EXFit2.C has the capability to now gainmatch all sx3 pads, and position along strip is still found from the central three pad edges. Treatment for (backE-missingfrontE) is being considered.
modified: Armory/ClassPW.h edited to account for the 4 wire offset instead of 3 in cathodes. This has been crossreferenced using the alpha source data in QQQ coinincidence to confirm
the position of the source.
made changes to correct for geomtry and eliminating redundant variables to a make the code more readable
modified: Armory/ClassPW.h
made changes to correct for the fact that the physical geometry of the detector is not the same as the geometry in the simulation, it is reversed and has an offset of 3
Sudarsan Balakrishnan
Vignesh Sitaraman
